-
Your Store:
-
Hover over the image to zoom in
BWD HVAC Blower Motor Resistor
See if this part fits a specific vehicle.
BWD blower motor resistors are manufactured to meet or exceed OE performance.
Back To Top
| Connector Gender: | Female |
| Terminal Gender: | Male |
REVIEW SNAPSHOT®
by PowerReviewsBWDBlower Motor Resistor
(based on 13 reviews)
Ratings Distribution
100%
of respondents would recommend this to a friend.
Pros
- Easy to use (8)
- Lightweight (3)
Cons
Best Uses
- Car & Truck:
- Casual driver (3)
- Was this a gift?:
- No (6)
REVIEWS
Reviewed by 13 customers
Sort by
Displaying reviews 1-10
Previous | Next »
Pros
- Easy To Use
Cons
Best Uses
Comments about BWD Blower Motor Resistor:
It fit my 2004 Jeep Liberty Sport perfectly. I only had high speed on my fan and then that died. It fixed the problem perfectly. A garage wanted to charge me on $100 to fix. It was easy to do on my own.
- Was this a gift?:
- No
Pros
- Durable
- Easy To Use
- High-Performance
- Lightweight
- Versatile
Cons
Best Uses
- Trucks
Comments about BWD Blower Motor Resistor:
Its an easy install part without much trouble if you want to avoid a costly dealer charge.
- Was this a gift?:
- No
Pros
Cons
Best Uses
Comments about BWD Blower Motor Resistor:
It fit the jeep and worked well. Apparently, this part goes out all the time!
It wasn't my car, I only buy Toyota or Honda!
- Was this a gift?:
- No
Pros
- Easy to install
- Easy To Use
- Lightweight
Cons
- None
Best Uses
- Na
Comments about BWD Blower Motor Resistor:
Simple to install. Only took about 5-10mins and now the blower motor in my wife's Jeep Liberty works on all settings not just high.
- Was this a gift?:
- No
Pros
- Easy To Use
Cons
Best Uses
Comments about BWD Blower Motor Resistor:
Had it for two weeks...still works!
- Was this a gift?:
- No
Comments about BWD Blower Motor Resistor:
I needed to repair a blower motor on my 2006 Jeep Wranger, one speed would not work.
Worked great, not to difficult to replace if you know the secret of getting the plug off. Take two small flat bladed screwdrivers. From the bottom of the connector, pry up a bit on the center red tab, just enough to make it touct the top, then push foward with the other screwdriver. The red "thingy" should slide forward about 1/8 of an inch. Then the plug can be worked loose.
Pros
- Easy To Use
- Lightweight
- Versatile
Cons
Best Uses
- Large Cars
- Small Cars
Comments about BWD Blower Motor Resistor:
As described, very easy to replace.
- Car & Truck:
- Auto Enthusiast, Casual Driver, Mechanic
- Was this a gift?:
- No
Comments about BWD Blower Motor Resistor:
installed easy enough and fixed the problem with the blower
Pros
- Fairly easy installation
- Perfect match
Cons
Best Uses
Comments about BWD Blower Motor Resistor:
This resistor was an exact match to the original one right down to the place of manufacture. The installation was much easier than the removal of the original. The price was the best I could find [...] at a local store.
- Car & Truck:
- Casual Driver, Do-it-yourselfer
Pros
- Easy To Use
Cons
Best Uses
Comments about BWD Blower Motor Resistor:
Fixed the low and low/medium speed settings on the fan. Install just takes minutes...
Do you have questions about this product?(earn points for answers!)
Ask a question, get answers from real customers and in-house experts. Or contact Customer Care by email or call 1-877-238-2623.
10 Questions | 10 Answers
Displaying questions 1-10
Q:
Where is the blower motor resister located on a 2003 Wrangler x RHD.Asked on 2/25/2013 by BILL from BELTON,SC1 answer
CUSTOMER CARE
A:
With reference to your inquiry on the BWD Blower Motor Resistor (Part No. RU1045), this blower motor resistor are located behind the glove box, on the passenger side.For any further assistance, please feel free to call us at: 1-877-238-2623 or visit the nearest Advance Auto Parts store and one of our Parts Pros will gladly assist you with any questions or concerns you may have.Answered on 2/25/2013 by Morgan from AAP
Q:
Do you think that BWD Blower Motor Resistor is better than the Factory Air AC Resistor? Why?Asked on 3/20/2012 by Liz from Sharon, MA1 answer
CUSTOMER CARE
A:
BWD Automotive offers you the rare combination of quality with superior coverage, service, support and competitive pricing. They never want to stop improving their products and services to ensure that they'll be as successful in the future as they are today. In short, you'll get everything you'd expect from the company that's leading the way into the 21st Century.Answered on 3/21/2012 by Vincent from AAP
Q:
I bought the resister for my 2005 jeep wrangler unlimited but have no idea where the old one is? I looked behind the glove box could not find anything that looks like the new oneAsked on 12/13/2011 by diesel from newark, de.1 answer
CUSTOMER CARE
A:
The Blower Motor Resistor is behind the dash, under the glove box, and right above the light at the passenger side footwell.Answered on 12/13/2011 by John the Car-Doc from AAP
Q:
have 2005 wrangler unlimited, have only high speed on heater fan , where do i find resitor for this?Asked on 11/18/2010 by deno from dville illinois1 answer
CUSTOMER CARE
A:
It should be on the case for A/C components behind the glove box.Answered on 11/18/2010 by Anonymous
Q:
My heater/ac blower on my 2005 Jeep Liberty only works on speeds 3 and 4. 1 and 2 do not blow. Is this what I need to fix this problem?Asked on 8/19/2010 by LonRaynger from Lawrence, KS1 answer
CUSTOMER CARE
A:
This may be what your problem is.Answered on 8/19/2010 by Mike from AAP
Q:
Where is this located on a 2004 Liberty Sport? I think this is the problem because all fan speeds work except the highest speed. Would you agree or could it also be something else wrong? Thank'sAsked on 7/11/2010 by ff6409 from Sugarcreek,Oh1 answer
CUSTOMER CARE
A:
Most of the time, these resistors are located behind the dash on the passenger side near all of the inside A/C components. It does sound like this may be your problem.Answered on 7/20/2010 by Mike from AAP
Q:
Where is this part located on a 2003 Wrangler.Asked on 6/2/2010 by Anonymous1 answer
CUSTOMER CARE
A:
If should be located on the assembly behind the glove box, under the dashboard. One other place that it may be, is on the other side of the panel where all your controls are for changing the air conditioning.Answered on 6/2/2010 by Mike from AAP
Q:
how do i remove the plug ?Asked on 5/12/2010 by sandman from pt. charlotte,fl.1 answer
CUSTOMER CARE
A:
You should be able to push down on the little clip and then pull.Answered on 5/12/2010 by Mike from AAP
Q:
how do i install a blower motor resistor for a 2006 jeep wrangler unlimited?Asked on 12/31/2009 by Anonymous from washington, nj1 answer
A:
motor is behind your glove box remove plug and two screws and replace this is an easy fixAnswered on 4/3/2010 by jeepinherndon from winchester ,va.
Q:
HOW DO I INSTALL THIS PART?Asked on 11/8/2009 by Anonymous1 answer
CUSTOMER CARE
A:
In order to be more helpful in response to your question. We need specific information about your vehicle make, model, and year. If you happen to be near an Advance Auto Parts store you can visit the store, or contact us at 1-877-ADVANCE. This way we can help you find the right part to fit your vehicle.Answered on 11/11/2009 by Rob from Advance Auto Parts
Displaying questions 1-10
Disclaimer
We strive to keep all information accurate and up-to-date; however, product availability, pricing, promotions and store hours are subject to change without notice. Please contact
Customer Care
if you have any questions or corrections.
