-
Your Store:
-
Hover over the image to zoom in
Factory Air Blower Motor
See if this part fits a specific vehicle.
Factory Air blower motors meet or exceed original equipment specifications.
Back To Top
| Dual Shaft: | No |
| Flange: | Yes |
| Motor Diameter: | 3.25 in |
| Motor Length: | 4.4375 in |
| OE Replacement: | Yes |
| Rotation: | CCW |
| Shaft Diameter: | .3125 in |
| Shaft Length: | 1.1875 in |
| Terminal Connection: | Yes |
| Vented: | Yes |
| Wheel(s) Included: | Yes |
| Wire Or Terminal Connection Type: | 2 Lead Wires |
REVIEW SNAPSHOT®
by PowerReviewsFactory AirBlower Motor
(based on 17 reviews)
Ratings Distribution
100%
of respondents would recommend this to a friend.
Pros
- Easy to install (12)
- Lightweight (5)
- Durable (4)
Cons
Best Uses
- Replacement (11)
- Everyday driving (7)
- Car & Truck:
- Casual driver (5)
- Reviewer Profile:
- Casual driver (4)
Most Liked Positive Review
Easy fix for the "Do-it-Yourselfer"!!
Although you need to be a contortionist to get under the dash, taking out the old blower was relatively easy. The old difficulty was one of the mounting screws is located tightly against the ...Read complete review
Although you need to be a contortionist to get under the dash, taking out the old blower was relatively easy. The old difficulty was one of the mounting screws is located tightly against the firewall and made it difficult to loosen for removal. I had also replaced the fan switch resistor, which I would recommend you do if replacing the blower. The blower must be removed to replace the resistor anyway. For the price of either, I would replace both even if you only need to replace one or the other. I figure it took me about 15 minutes to remove, 20 minutes to replace both parts and another 15 - 20 minutes to tidy up under the dash and put tools away. So great to have heat and a defroster again. Got tired of looking through a peephole to drive.
VS
Most Liked Negative Review
Annoying Noise - Works Great
One morning I had ice on my windshield so I turned my defrosters on by turning the fan switch dial. When I turned my fan dial from 1 - 5, nothing was working, no...Read complete review
One morning I had ice on my windshield so I turned my defrosters on by turning the fan switch dial. When I turned my fan dial from 1 - 5, nothing was working, no noise, no heat coming out of the vents, and worst of all, no defrosters and it is 34 degrees outside with ice on my windows. If you turn the fan switch dial and nothing works then you need to replace your heater blower. If your fan switch does work, but only on a couple different settings, like 3, 4, &5 but dial setting 1 and 2 doesn't work, then you need to replace the Heater Resistor Pack. If you need to replace the heater resistor pack, do yourself a huge favor and let a shop work on installing it. If you replace the blower motor, then you should be able to replace this yourself, but ask for a torx driver for the 3 screws you need to remove the blower unit. This unit is easy to install but is in a bad location inder the glove box. You must use the original heater hose that is attatched to the original blower motor. There is a wire connection that can be a pain to disconnect when taking the original unit out of the car, but if you have trouble, do not cut the wire. The install can take about 30 miniutes, but you will need a special torx driver to take the 3 screws out. This unit will hum on fan setting number one, but it can be annoying if your radio is off.If you plan to keep the car more than a few months, then I would suggest to spend more money and buy a different blower motor that is quiet.
REVIEWS
Reviewed by 17 customers
Sort by
Displaying reviews 1-10
Previous | Next »
Pros
- Easy To Install
- Lightweight
Cons
Best Uses
- Everyday Driving
- Replacement
Comments about Factory Air Blower Motor:
Daughter was glad to have heat and defroster working again.
Pros
- Easy To Install
Cons
Best Uses
- Replacement
Comments about Factory Air Blower Motor:
Although you need to be a contortionist to get under the dash, taking out the old blower was relatively easy. The old difficulty was one of the mounting screws is located tightly against the firewall and made it difficult to loosen for removal. I had also replaced the fan switch resistor, which I would recommend you do if replacing the blower. The blower must be removed to replace the resistor anyway. For the price of either, I would replace both even if you only need to replace one or the other. I figure it took me about 15 minutes to remove, 20 minutes to replace both parts and another 15 - 20 minutes to tidy up under the dash and put tools away. So great to have heat and a defroster again. Got tired of looking through a peephole to drive.
Pros
- Easy To Intstall
- Good Price
Cons
- Hums On Lowest Setting
Best Uses
- Everyday Driving
Comments about Factory Air Blower Motor:
For the past few years, my A/C/heat would blow incredibly weak and would give off a startling high pitch hum. Installing was essentially easy. The only hard part was accessing the blower motor area. The only con is the there is a low hum when the air blows on the lowest setting. It's you cant hear it unless youre actually paying attention to it or if the radio is on. Other than that, my A/C/heat blows strong and better than ever.
Pros
- Durable
- Easy To Install
Cons
Best Uses
- Replacement
Comments about Factory Air Blower Motor:
Good replacement for heat/ac fan motor.
Pros
- Durable
- Easy To Install
Cons
Best Uses
- Everyday Driving
- Replacement
Comments about Factory Air Blower Motor:
Exact fit replacement. Easy to install. Good product - good price.
Pros
- Nice Replacement
Cons
Best Uses
- Replacement
Comments about Factory Air Blower Motor:
it's a nice replacement blower motor - it is a little bit awkward to install though
Pros
- Blows Hot Air
- Easy To Install
- Lightweight
- Only has 3 screws
- Smaller blower fan
Cons
- Must use original hose
- Noisy hum on low setting
Best Uses
- Everyday Driving
- Replacement
Comments about Factory Air Blower Motor:
One morning I had ice on my windshield so I turned my defrosters on by turning the fan switch dial. When I turned my fan dial from 1 - 5, nothing was working, no noise, no heat coming out of the vents, and worst of all, no defrosters and it is 34 degrees outside with ice on my windows. If you turn the fan switch dial and nothing works then you need to replace your heater blower. If your fan switch does work, but only on a couple different settings, like 3, 4, &5 but dial setting 1 and 2 doesn't work, then you need to replace the Heater Resistor Pack. If you need to replace the heater resistor pack, do yourself a huge favor and let a shop work on installing it. If you replace the blower motor, then you should be able to replace this yourself, but ask for a torx driver for the 3 screws you need to remove the blower unit. This unit is easy to install but is in a bad location inder the glove box. You must use the original heater hose that is attatched to the original blower motor. There is a wire connection that can be a pain to disconnect when taking the original unit out of the car, but if you have trouble, do not cut the wire. The install can take about 30 miniutes, but you will need a special torx driver to take the 3 screws out. This unit will hum on fan setting number one, but it can be annoying if your radio is off.If you plan to keep the car more than a few months, then I would suggest to spend more money and buy a different blower motor that is quiet.
Pros
- Easy To Install
Cons
Best Uses
- Replacement
Comments about Factory Air Blower Motor:
item fairly priced when combined with online coupon discount
Pros
- Durable
- Lightweight
- Somewhat easy to install
Cons
Best Uses
- Replacement
Comments about Factory Air Blower Motor:
Replaced the blower motor resistor, didn't fix the problem so the next step was the blower motor itself. Heater works perfect now.
- Car & Truck:
- Casual Driver
Pros
- Easy To Install
- Factory connector
Cons
Best Uses
Comments about Factory Air Blower Motor:
Factory connector on a pigtail helps in the re-installation.
Do you have questions about this product?(earn points for answers!)
Ask a question, get answers from real customers and in-house experts. Or contact Customer Care by email or call 1-877-238-2623.
8 Questions | 11 Answers
Displaying questions 1-8
Q:
i went to turn my heat on today cause my windows were fogging up and nothing happened on any settings no air came out what so ever, i checked all my fuses and there all good, will this part fix itAsked on 10/15/2012 by tyler1 answer
CUSTOMER CARE
A:
With reference to this Factory Air Blower Motor - part# 35002, the blower motor may be the possible cause of the problem. However, I would suggest taking your vehicle to a certified mechanic for a proper diagnosis before buying and having parts installed that may not (solve/be) the problem. For any further assistance, you may also visit your nearest Advance Auto store or call us directly at 1-877-ADVANCE (238-2623) and one of our representatives there would be more than happy to assist you.Answered on 10/15/2012 by Vincent from AAP
Q:
Can I get this blower moter without the squirrel cage(wheel)?Asked on 10/19/2011 by Debbie from Ironwood,, Michigan1 answer
CUSTOMER CARE
A:
We greatly appreciate your taking time to submit a review. Please call us at 1-877-ADVANCE (238-2623) and we would be more than happy to assist you.Answered on 10/20/2011 by Aaron from AAP
Q:
My blower just started making noises. How do I get to the blower motor to replace it?Asked on 7/6/2011 by Jim from Fremont, Ohio1 answer
CUSTOMER CARE
A:
In order to check the exact fit application, please provide the year, make, model and engine size of the vehicle.Answered on 7/8/2011 by Vincent from AAP
Q:
One night the heat in my car just stopped working. The a/c stopped as well. When i turn either one on i get nothing. Is this product the fix?Asked on 5/27/2011 by G-rap. from Philadelphia, PA1 answer
CUSTOMER CARE
A:
This could possibly be the problem. However, with out the presence of your vehicle we would not be able to properly diagnose it nor provide you with a 100% answer.Answered on 5/27/2011 by DIY Daniel from AAP
Q:
is it easy to install an air blower motor and how do you intall it in a 2001 monte carlo ls?Asked on 3/29/2011 by denny from lockport ny1 answer
CUSTOMER CARE
A:
Well this all depends on the skill level of whoever is removing or replacing the part. Some may have a harder time than others who have experience. I would recommend purchasing a Haynes repair manual specifically for your vehicle. This should be able to assist you further into detail on how to repair or replace specific parts.Answered on 3/29/2011 by Parts Guru Geo from AAP
Q:
1998 pontiac grand prix gt is there a difference dual zone controlled and manual climate control hvac blower motors.Asked on 12/16/2010 by tech 1968 from pensacola, florida1 answer
A:
No difference, same motor fits either/or. Dual zone climate dash control is controlled with damper door being adjusted thru vacuum assist to give either more air flow or less air flow toward passenger. Fan motor turns same with selected speed but air flow is adjusted for either more or less air blowing on passenger, depending on how far closed/open the damper door is.
Q:
R&R instruction guide.Asked on 8/9/2010 by Shade Tree C. from Channelview, Tx3 answers
CUSTOMER CARE
A:
For step by step instructions, I recommend looking into a repair manual for your vehicle.Answered on 8/10/2010 by Mike from AAPA:
Unplug electrical connector, remove 3 mounting screws, pull vent hose from duct and remove motor. To assembly check that squirrel fan is same size, (if not swap to fan from old motor). Mount gasket around base of fan housing, pull correct plug from new motor then take hose from old motor and insert into correct hole on new motor, (that hose is for dash control selecting recirculate). Insert motor back into and tighten screws, push hose end onto duct, connect elect plug.A:
Unplug electrical connector, remove 3 mounting screws, pull vent hose from duct and remove motor. To assembly check that squirrel fan is same size, (if not swap to fan from old motor). Mount gasket around base of fan housing, pull correct plug from new motor then take hose from old motor and insert into correct hole on new motor, (that hose is for dash control selecting recirculate). Insert motor back into and tighten screws, push hose end onto duct, connect elect plug.
Q:
i have seen a part with AC- - do i need that part or will a standard blower motor work with a car that also has AC?Asked on 11/2/2009 by rookie car lady from westland mi2 answers
CUSTOMER CARE
A:
In order to be more helpful in response to your question. We need specific information about your vehicle make, model, and year. If you happen to be near an Advance Auto Parts store, you can visit the store, or contact us at 1-877-ADVANCE. This way we can help you find the right part to fit your vehicle.Answered on 11/16/2009 by Rob from Advance Auto Parts
Displaying questions 1-8
Disclaimer
We strive to keep all information accurate and up-to-date; however, product availability, pricing, promotions and store hours are subject to change without notice. Please contact
Customer Care
if you have any questions or corrections.
