-
Your Store:
-
Hover over the image to zoom in
Dorman - OE Solutions Anti-Lock Brake Sensor with Harness
See if this part fits a specific vehicle.
Restore the anti-lock brake system to safe, proper operation with Dorman’s Anti-Lock Brake System Wheel Speed Sensor. It’s engineered from high quality materials to provide years of service. Plus, it comes with all the necessary installation hardware for a complete repair.
Product Features:
Back To Top
Product Features:
- Effectively transmits the vehicle’s wheel speed through the harness, back to the anti-lock brake system control module
- Direct replacement for a proper fit every time
- Easy to install
- Quality tested to ensure long-lasting performance
| Location: | Front Left & Right |
| Terminal Type: | Blade |
REVIEW SNAPSHOT®
by PowerReviewsDorman - OE SolutionsAnti-Lock Brake Sensor with Harness
(based on 3 reviews)
Ratings Distribution
100%
of respondents would recommend this to a friend.
REVIEWS
Reviewed by 3 customers
Sort by
Displaying reviews 1-3
Pros
- Easy To Install
Cons
Best Uses
- Replacement
Comments about Dorman - OE Solutions Anti-Lock Brake Sensor with Harness:
The one-way fasteners were all in the exact same place as the OEM I took off. Nice touch. Only reason I didn't give 5 stars is because I haven't had it on long enough to attest to durability.
Pros
- Easy To Install
- Perfect fit
Cons
- None
Best Uses
- Replacement
Comments about Dorman - OE Solutions Anti-Lock Brake Sensor with Harness:
The ABS would kick in on my 2000 Silverado when stopping under five miles per hour causing me to continue to roll. This is a common problem when brake dust and dirt get between the hub and ABS sensor. I went to remove the old sensors to clean them and one of them broke off in the hub. This sensor was a perfect fit for my truck and very easy to install. The only difficult part about the install was that I needed to remove the rust from my truck in order for the plastic connectors to attack to the truck itself. Just a few minutes with a round file and they went right in. Just remember that you have to remove your wheel, caliper, and rotor to get to this sensor. It is very easy to change and this is the best price compared to the other auto parts stores.
Pros
Cons
Best Uses
- Everyday Driving
Comments about Dorman - OE Solutions Anti-Lock Brake Sensor with Harness:
Search online for discount codes, buy parts online with code, then pick up in store. Save $$
Displaying reviews 1-3
Do you have questions about this product?(earn points for answers!)
Ask a question, get answers from real customers and in-house experts. Or contact Customer Care by email or call 1-877-238-2623.
7 Questions | 7 Answers
Displaying questions 1-7
Q:
My 2006 Chevrolet Suburban is rear-wheel drive only. Do all 4 wheels have speed sensors? Or just the front wheels? I am looking to replace the sensor harnesses. Will this item work for me?Asked on 11/24/2012 by JK from Kildeer, Illinois1 answer
CUSTOMER CARE
A:
Your 2006 Chevrolet Suburban requires Front left and right ABS sensors (Dorman - OE Solutions Anti-Lock Brake Sensor with Harness - Part No. 970-011) only. For any further assistance please feel free to call us at: 1-877-238-2623 or visit the nearest Advance Auto store and one of our representatives will gladly assist you with any questions or concerns you may have.Answered on 11/26/2012 by John the Car-Doc from AAP
Q:
what are the steps for installing the Dorman anti-lock brake sensor on a 1999 Silverado 1500 regular cab, short bed, 4WD w/ 5.3L engine?Asked on 10/17/2012 by Dick from Indianapolis1 answer
CUSTOMER CARE
A:
With reference to this Dorman - OE Solutions Anti-Lock Brake Sensor with Harness - part# 970-011 for installing the (ABS) wheel sensor on a 1999 Chevy Silverado 1500, Raise and support the vehicle. Use a socket wrench to remove the tire and wheel. Disconnect the brake rotor with a socket wrench so you can release the mounting clips for the wheel speed sensors from the frame, knuckle and upper control arm. Unplug the electrical connector for the wheel sensor and remove the wheel speed sensor mounting bolt with a socket wrench. Pull the wheel sensor straight out of the bore in the wheel hub/bearing assembly. Clean the wheel sensor mounting surface with a wire brush to remove any corrosion and apply a thin layer of wheel bearing lubricant to the hub surface. Install the new wheel speed sensor by reversing the removal steps. Ensure the sensor lies flat against the wheel hub and use a torque wrench to tighten the wheel sensor mounting bolt. For any further assistance, you may also visit your nearest Advance Auto store or call us directly at 1-877-ADVANCE (238-2623) and one of our representatives there would be more than happy to assist you.Answered on 10/17/2012 by Vincent from AAP
Q:
what are all of the steps for installing this sensor?Asked on 10/15/2012 by Dick1 answer
CUSTOMER CARE
A:
This Dorman - OE Solutions Anti-Lock Brake Sensor with Harness - part# 970-011 is vehicle specific. For assisting you further on installing this anti-lock brake sensor, please provide the year, make, model and engine size of the vehicle. For any further assistance, you may also visit your nearest Advance Auto store or call us directly at 1-877-ADVANCE (238-2623) and one of our representatives there would be more than happy to assist you.Answered on 10/15/2012 by Vincent from AAP
Q:
will this correct my eractic speedometer readingAsked on 2/23/2012 by shirl from mobile,al1 answer
CUSTOMER CARE
A:
Yes, this part could possibly fix the problem. However, without the presence of your vehicle we would not be able to properly diagnose it nor provide you with a 100% answer. We would suggest that you take your vehicle to a certified mechanic for further diagnosis.Answered on 2/23/2012 by Steve from AAP
Q:
2002 Avalanche that the ABS seems to engage on the drivers front when coming to a stop on dry pavement. ABS dash light does NOT come on. Truck not driven alot -- sits a week at at time between use.
Could some thing needing cleaning or replacement in the ABS System?Asked on 8/12/2011 by Bobby from Gibsonia, PA1 answer
CUSTOMER CARE
A:
It seems your ABS wheel speed sensor needs to be cleaned or replaced. However, I would suggest taking your vehicle to a certified mechanic for a proper diagnosis before buying and having parts installed that may not (solve/be) the problem.Answered on 8/14/2011 by Vincent from AAP
Q:
will this fit the 4wd model? 2004 silverado 1500 5.3 T.Asked on 5/12/2011 by Anonymous1 answer
CUSTOMER CARE
A:
Yes, this part fits your 2004 Chevrolet Silverado 1500.Answered on 5/13/2011 by DIY Daniel from AAP
Q:
I'm trying to verify that this will fit my truck. A 2005 GMC Sierra 1500 4x4 extended cab. VIN # GTEK19B151328937. I need this component for the passenger side. Some of the other abs sensors are specific to the cab or 2WD but this one doesn't say...Asked on 11/24/2010 by Anonymous1 answer
CUSTOMER CARE
A:
This is for 2WD vehicles.Answered on 11/24/2010 by Mike the Auto Parts Master from AAP
Displaying questions 1-7
Disclaimer
We strive to keep all information accurate and up-to-date; however, product availability, pricing, promotions and store hours are subject to change without notice. Please contact
Customer Care
if you have any questions or corrections.
