-
Your Store:
-
Hover over the image to zoom in
Metra Adjustable Line Output Converter
Fit of this part varies by vehicle & equipment specs
Adjustable line output converter. Converts high-level (speaker) outputs to low-level (RCA) inputs necessary to drive amplifiers and other accessories. Two channel adjustments (0 to 1200mv) allow for perfect match to any amplifier, equalizer or other accessory. Eliminates ground loops, which can cause ground interference. Accepts floating or common ground and up to 30 watts per channel. Allows for the retention of the factory stereo head unit when upgrading the system by adding amplifiers and other accessories. Fully compatible with factory fader. No power requirements due to innovative passive circuitry.
Product Features:
Back To Top
Product Features:
- Converts high-level (speaker) outputs to low-level (RCA) inputs
- Two channel adjustments (0 to 1200mv) allow for a perfect match to any amplifier, equalizer or other accessory
- Eliminates ground loops that can cause ground interference
- Accepts floating or common ground and up to 30 watts per channel
| Bezel Attachment Method: | Brackets |
| Bezel Material: | ABS Plastic |
REVIEW SNAPSHOT®
by PowerReviewsMetraAdjustable Line Output Converter
(based on 2 reviews)
Ratings Distribution
REVIEWS
Reviewed by 2 customers
Sort by
Displaying reviews 1-2
Pros
- Durable
- Easy to Install
- Easy To Use
Cons
Best Uses
Comments about Metra Adjustable Line Output Converter:
works great if u know how to install it!! very easy to install!! u splice into rear speackers, u ground it out, u hook up rca cables.. BAM its done.. then u run your remote wire, and power wire and u got a workin amp!! that simple.. great product!
- Was this a gift?:
- No
Pros
Cons
- Flimsy
- Poor Performance
Best Uses
Comments about Metra Adjustable Line Output Converter:
Bought this Line Output Converter to attenuate the output of my stock head unit to RCA levels for my power amp. It works, but it's cheap, poorly constructed, Chinese junk. It made the stereo sound like and old AM radio transistor radio at the bottom of a tin can. Complete waste of money.
- Was this a gift?:
- No
Displaying reviews 1-2
Do you have questions about this product?(earn points for answers!)
Ask a question, get answers from real customers and in-house experts. Or contact Customer Care by email or call 1-877-238-2623.
8 Questions | 8 Answers
Displaying questions 1-8
Q:
What do i hook the ground wire up to ???Asked on 7/11/2011 by morgan from deptford nj1 answer
CUSTOMER CARE
A:
I would recommend purchasing a Haynes repair manual for your vehicle. This will have many of the locations of parts needed for a variety of repairs.Answered on 7/13/2011 by Start with Shane! from AAP
Q:
What else do I need to do it myself?Asked on 7/6/2011 by Damian from Houston, Tx1 answer
CUSTOMER CARE
A:
I would recommend purchasing a Haynes repair manual for your vehicle. This will have many of the locations of parts needed for a variety of repairs.Answered on 7/9/2011 by Start with Shane! from AAP
Q:
how do i install this correctly because iv tried following the instructions but i dosent seem to workAsked on 4/29/2011 by Anonymous1 answer
CUSTOMER CARE
A:
I would recommend purchasing a Haynes repair manual for your vehicle. This will have many of the locations of parts needed for a variety of repairs.Answered on 4/30/2011 by DIY Daniel from AAP
Q:
Which wire do I hook the positive and negitive to?Asked on 2/12/2011 by Anonymous1 answer
CUSTOMER CARE
A:
Red is positive, White is negative.Answered on 2/14/2011 by David the Dynamite Parts Guy from AAP
Q:
So you this taps into car speaker like (neg. and positive wire)then in to youre amp .Then you just run power to the amp?Asked on 1/6/2011 by Anonymous1 answer
CUSTOMER CARE
A:
I would suggest taking your vehicle to a certified mechanic for a proper diagnosis before buying and having parts installed that may not (solve/be) the problem.Answered on 1/7/2011 by Parts Guru Geo from AAP
Q:
do it go to a factor stereo so you can hook a amp upAsked on 12/25/2010 by bub from manning sc1 answer
CUSTOMER CARE
A:
Yes, this converts high-level (speaker) outputs to low-level (RCA) inputs necessary to drive amplifiers and other accessories.Answered on 12/29/2010 by Ron the Auto Parts Rebel from AAP
Q:
wich is positive and negative wire and what is the brown wire for.thanksAsked on 7/24/2010 by Anonymous1 answer
CUSTOMER CARE
A:
red positive, white neg. and brown is groundAnswered on 8/14/2010 by luz from aap
Q:
how do i hook this up to my jensen 4 channel amp?Asked on 1/22/2010 by fr3ak from rockcave wv1 answer
A:
These are 2-channel units. You will need to buy two of these if you wish to use this on a 4-channel and keep your 'Fade' from front to rear. One unit for front channels and one unit for rear channels. There are also 4-channel line converters but I do not think Advance Autoparts sells them.Answered on 4/14/2010 by Sleepin Saturn from Wendell, NC
Displaying questions 1-8
Disclaimer
We strive to keep all information accurate and up-to-date; however, product availability, pricing, promotions and store hours are subject to change without notice. Please contact
Customer Care
if you have any questions or corrections.
