| Finish: | Aluminized |
| Inlet Configuration: | Offset |
| Inlet Inside Diameter: | 2.500 in |
| Inlet Quantity: | 1 |
| Internal Construction: | Reflection |
| OE Replacement: | Universal |
| Outlet Configuration: | Centered |
| Outlet Inside Diameter: | 2.500 in |
| Outlet Quantity: | 1 |
| Outlet Type: | Pipe Connection |
| Overall Length: | 19.000 in |
| Reversible: | No |
| Shell Diameter Height: | 4.000 in |
| Shell Diameter Width: | 9.500 in |
| Shell Length: | 13.000 in |
| Shell Material: | Steel |
| Shell Shape: | Oval |
REVIEW SNAPSHOT®
by PowerReviews(based on 5 reviews)
Ratings Distribution
100%
of respondents would recommend this to a friend.
Pros
Cons
Best Uses
REVIEWS
Reviewed by 5 customers
Sort by
Displaying reviews 1-5
Pros
Cons
Best Uses
Comments about Thrush Welded Muffler:
Love the sound of this muffler but i noticed the weld broke. but it's fixable
Images shared by Justin
Were it broke
(4 of 7 customers found this review helpful)
Was this review helpful? Yes / No
- You may also flag this review
Pros
Cons
Best Uses
Comments about Thrush Welded Muffler:
I needed something with a bit more sound for my Porsche 924S that didn't look like a ricer exhaust and/or cost a fortune, and this muffler really delivered! It's a 2 chamber very similar to the Flowmaster 40 but at half the cost. My engine is a rather large inline 4 cyl pushing 2.5L, so is a bit tricky to get a nice smooth sound without sounding like a really bad teen tuner project. This muffler swapped in place of the factory part gets me that really nice deep, hollow, expensive euro sports/weekend race car sound that I was looking for, and it cost me far, far less than off the shelf systems on the market. Since my muffler is right at the rear of the car, it maintains an understated look that won't attract unwanted attention, especially painted with black exhaust paint, which also helps protect it from corrosion. It's constructed very well with thick gage steel and solid welds. I've had it for almost 2 years and it's only just beginning to show some surface rust in a couple spots, and I drive it all year, snow, rain, etc.
Only downside I found is it can be kind of loud and harsh with a really open exhaust system (no cat/resonator). This would be no problem and would actually enhance the sound on engine configurations that naturally sound good, like V6, I6, V8's, etc., but my big 4 cyl needed the rest of the exhaust components to keep the sound smooth (and legal). On a race track, though, it would be great with a test pipe and 4-1 headers, but with a totally different raw, open sound.
Bottom Line Yes, I would recommend this to a friend
Images shared by HondaDustR
Images shared by HondaDustR
(68 of 109 customers found this review helpful)
Was this review helpful? Yes / No
- You may also flag this review
Pros
Cons
Best Uses
Comments about Thrush Welded Muffler:
Great price, love the sound of it!
Pros
Cons
Best Uses
Comments about Thrush Welded Muffler:
Muffler on the 4.7 is just amazing, produced the best sound we could have imagined, exactly what we were looking for, we removed old muffler/tailpipe, and welded muffler onto 2 3/4 Y pipe, with dual exits out the sides at a 90 degree angle, with 3 1/2 inch chrome tips
Bottom Line Yes, I would recommend this to a friend
Images shared by RECKLESS RAM
Thrush Welded Muffler
Images shared by RECKLESS RAM
Y Pipe connecting muffler to dual exhausts
(68 of 112 customers found this review helpful)
Was this review helpful? Yes / No
- You may also flag this review
Pros
Cons
Best Uses
Comments about Thrush Welded Muffler:
Overall this is a good muffler for the value. I would purchase again.
Displaying reviews 1-5
Do you have questions about this product?(earn points for answers!)
Ask a question, get answers from real customers and in-house experts. Or contact Customer Care by email or call 1-877-238-2623.
Q:
will this fit my 2004 xlt ranger?1 answer
CUSTOMER CARE
A:
This Thrush Welded Muffler(Part# 17656) is designed to fit most vehicles, but is not an exact fit for your vehicle. This is a universal, one size fits most part. The specifications are Inlet Diameter (in): 2.500 in., Outlet Diameter (in): 2.500 in., Case Length (in): 13.000 in., Overall Length (in): 19.000 in., Thickness (in):4.000 in., Width (in): 9.500 in., Outlet Style: Standard, without tip.Q:
will this fit my 98 volvo s70?1 answer
CUSTOMER CARE
A:
No, this Thrush Welded Muffler with Part# 17656 does not fit your 1998 Volvo s70.Q:
will this muffler fit my 1996 v6 camaro?1 answer
CUSTOMER CARE
A:
This part Thrush Welded Muffler, Part No. 17656 manufactured by Thrush is universal and not a direct fit for your vehicle 1996 Chevrolet Camaro V6. This is a one size fits most, slight modification may be required.Q:
do have to weld this on or can you use the u-bolt clamps2 answers
A:
yes you can use u boltsCUSTOMER CARE
A:
This Thrush Welded Muffler (Part No. 17656) is universal and not a direct fit, so it can be either welded or you can use the U-clamps.Q:
will this muffler fit my 96 cavalier z24?1 answer
CUSTOMER CARE
A:
This part Thrush Welded Muffler, Part No. 17656 manufactured by Thrush is universal and not a direct fit for your vehicle 1996 Chevrolet Cavalier Z24 . This is a one size fits most, slight modification may be required.Q:
Will this muffler fit a 2007 Envoy Denali?1 answer
CUSTOMER CARE
A:
This part Thrush Welded Muffler, Part No. 17656 manufactured by Thrush is universal and not a direct fit for your vehicle 2007 GMC Envoy Denali. This is a one size fits most, slight modification may be required. The specification are : Case Shape: Oval, Inlet Diameter (in): 2.500 in., Inlet Quantity: One, Inlet Location: Offset, Outlet Diameter (in): 2.500 in., Outlet Quantity: One,Outlet Location: Center, Internal Construction: Chambered, Muffler Material: Steel, Muffler Finish: Aluminized, Case Length (in): 13.000 in., Overall Length (in): 19.000 in., Thickness (in): 4.000 in., Width (in): 9.500 in., Outlet Style: Standard, without tip.Q:
Will this welded muffler part#17656 fit a 2006 chevy1 answer
CUSTOMER CARE
A:
This part Thrush Welded Muffler, Part No. 17656 manufactured by Thrush is universal and not a direct fit for your vehicle 2006 Chevrolet Impala LTZ. This is a one size fits most, slight modification may be required. The specification are : Case Shape: Oval, Inlet Diameter (in): 2.500 in., Inlet Quantity: One, Inlet Location: Offset, Outlet Diameter (in): 2.500 in., Outlet Quantity: One,Outlet Location: Center, Internal Construction: Chambered, Muffler Material: Steel, Muffler Finish: Aluminized, Case Length (in): 13.000 in., Overall Length (in): 19.000 in., Thickness (in): 4.000 in., Width (in): 9.500 in., Outlet Style: Standard, without tip.Q:
Will it fit my 2002 Ford Ranger XLT?1 answer
CUSTOMER CARE
A:
This part Thrush Welded Muffler, Part No. 17656 manufactured by Thrush is universal and not a direct fit for your vehicle. This is a one size fits most, slight modification may be required. The specification of the part are: Case Shape: Oval, Inlet Diameter (in): 2.500 in., Inlet Quantity: One, Inlet Location: Offset, Outlet Diameter (in): 2.500 in., Outlet Quantity: One,Outlet Location: Center, Internal Construction: Chambered, Muffler Material: Steel, Muffler Finish: Aluminized, Case Length (in): 13.000 in., Overall Length (in): 19.000 in., Thickness (in): 4.000 in., Width (in): 9.500 in., Outlet Style: Standard, without tip.Q:
Will this fit my 99 Caddilac Deville Concours?1 answer
CUSTOMER CARE
A:
No, I am sorry. This Thrush Turbo Muffler is not an ideal fit for your 99 Cadillac De Ville. However please check Walker Quiet-Flow SS Stainless Steel Direct-Fit Assembly (Part No. 54151 or Part No. 54152) which would be the ideal fit.Q:
will this muffler (part#17656 )slip into the tube on the flotech kit (part#51525flt)and tighten up with just the clamps1 answer
CUSTOMER CARE
A:
Both the inlet diameter and outlet diameter are 2.5 inches for Thrush Welded Muffler part# 17656.The Intermediate Pipe Diameter is 2.250 in and Tailpipe Diameter is 2.250 in for Flowtech Kit part# 51525FLT.
Enter your zip code:
