-
Your Store:
-
Hover over the image to zoom in
Design Engineering Titanium Wrap
Fit of this part varies by vehicle & equipment specs
Titanium exhaust wrap, with LR Technology, is made from pulverized lava rock and stranded into a fiber material and is engineered to be stronger than typical wraps on the market today. It has the ability to handle higher heat for improved performance and durability
Product Features:
Back To Top
Product Features:
- Withstands 1800ËšF direct/2500ËšF radiant heat
- Promotes increased flow for improved performance
- High resistance to chemical & oil spills and abrasions
- Helps to reduce temperature & vibration breakdown
REVIEW SNAPSHOT®
by PowerReviewsDesign EngineeringTitanium Wrap
(based on 3 reviews)
Ratings Distribution
67%
of respondents would recommend this to a friend.
Pros
Cons
Best Uses
- Large cars (3)
- Was this a gift?:
- No (3)
REVIEWS
Reviewed by 3 customers
Sort by
Displaying reviews 1-3
Pros
- High-Performance
Cons
Best Uses
- Large Cars
Comments about Design Engineering Titanium Wrap:
I ordered this product on-line.I ordered 2 rolls, assuming it would be enough to do the Headers. I called Summit to order a high performance clutch and asked about the wrap. He said that 2 rolls would not even be close. I wound up buying the Header wrap kit from Summit. I now have to return your wrap.Nowhere in the ad does it list the coverage for the wrap.
- Was this a gift?:
- No
Pros
- Durable
- Easy To Use
- Versatile
Cons
Best Uses
- Large Cars
- Motorcycle
- Small Cars
- Trucks
Comments about Design Engineering Titanium Wrap:
Installed on 2007 FXSTC. Removed factory heat shields and took less than a hour to install wrap. Very easy to use, secured with stainless ties, reinstalled factory shields and fired it up. The wrap smoked for about 20 minutes and then I ran the bike on the highway for some extra heat, was 33 deg when installed. Came back to yard let it idle another 20 mins, there was no more smoke just a slight odor. Could feel the difference in the amount of heat coming from the engine and the exhaust had a deeper tone.
- Was this a gift?:
- No
Pros
- Durable
- Easy To Use
- High-Performance
- Lightweight
- Looks really good
- Lowered heat
- No soaking in water
- Versatile
Cons
Best Uses
- Large Cars
- Motorcycles
- Small Cars
- Trucks
Comments about Design Engineering Titanium Wrap:
Wrapped the exhaust on my '97 F650 and have noted a decrease in temperature on my right leg. Not sure if I noticed an increase in HP but riding in +100 temperatures in Texas this product makes the commute a little more bearable. It also looks good too.
- Car & Truck:
- Motorcycle
- Was this a gift?:
- No
Displaying reviews 1-3
Do you have questions about this product?(earn points for answers!)
Ask a question, get answers from real customers and in-house experts. Or contact Customer Care by email or call 1-877-238-2623.
16 Questions | 19 Answers
Displaying questions 1-10Previous | Next »
Q:
will wrapping j pipes from head to muffler on 72 vw beetle reduce heat in engine compartmentAsked on 2/2/2013 by bil1 answer
CUSTOMER CARE
A:
With reference to your inquiry on Design Engineering Titanium Wrap - Part No. 010129 the exhaust wrapping results in two significant benefits: (a) reduces the amount of radiant heat damage to other vehicle components and lowers under hood temperatures and (b) exhaust insulation will maintain hotter exhaust gases. Hotter exhaust gases have a decreased density; this allows the exhaust gas to exit the system faster. An increased exhaust scavenging effect is produced in some cases this can also lower intake temperatures and increase horsepower. For any further assistance please feel free to call us at: 1-877-238-2623 or visit the nearest Advance Auto Parts store and one of our Parts Pros will gladly assist you with any questions or concerns you may have.Answered on 2/2/2013 by John the Car-Doc from AAP
Q:
will wrapping heater boxes on 65 vw beetle produce more heat for interior.Asked on 2/2/2013 by bill1 answer
CUSTOMER CARE
A:
With reference to your inquiry on Design Engineering Titanium Wrap - Part No. 010129 the exhaust wrapping results in two significant benefits: (a) reduces the amount of radiant heat damage to other vehicle components and lowers under hood temperatures and (b) exhaust insulation will maintain hotter exhaust gases. Hotter exhaust gases have a decreased density; this allows the exhaust gas to exit the system faster. An increased exhaust scavenging effect is produced in some cases this can also lower intake temperatures and increase horsepower. For any further assistance please feel free to call us at: 1-877-238-2623 or visit the nearest Advance Auto Parts store and one of our Parts Pros will gladly assist you with any questions or concerns you may have.Answered on 2/2/2013 by John the Car-Doc from AAP
Q:
can i use permatex muffler and tail pipe sealer to make this wrap stick?Asked on 10/21/2012 by justin from hamilton, nj1 answer
CUSTOMER CARE
A:
This part Design Engineering Titanium Wrap, Part No. 010129 is already extremely pliable allowing for a tight wrap and easy installation. For securing it you can use DEI (Design Engineering) stainless steel locking tie, hose clamp or safety wire.
For any further assistance, please feel free to call us at 1-877-238-2623 or visit your nearest Advance Auto Parts store and our representatives would be more than happy to assist you.Answered on 10/22/2012 by Aaron from AAP
Q:
In the picture it looks like it may also be available in 1" by 50' rolls. If so, please furnish part # and price.Asked on 10/10/2012 by Kurt from glen ellyn, il.1 answer
CUSTOMER CARE
A:
The size of this Design Engineering Titanium Wrap (Part No. 010129) is 2 inches in wide and 15 feet in length. For further assistance, please feel free to call us at 1-877-238-2623 or visit your nearest Advance Auto Parts store and one of our representatives would be more than happy to assist you.Answered on 10/10/2012 by Steve from AAP
Q:
`why shouldn't I buy the exact same roll at Summit for $16.95?Asked on 3/31/2012 by rich from arlington hieghts1 answer
CUSTOMER CARE
A:
In order to best answer your question, our representatives would be more than happy to assist you if you could please call us at 1-877-ADVANCE (238-2623).Answered on 4/2/2012 by Vincent from AAP
Q:
What size is this product?Asked on 3/27/2012 by Bert from pittsburgh PA1 answer
CUSTOMER CARE
A:
The size of this Design Engineering Titanium Wrap (Part No. 010129) is 2 in. Wide x 15 ft.Answered on 3/27/2012 by Dennis from AAP
Q:
can this tape temp cover small holes in the mufflerAsked on 3/11/2012 by jojo from Crewe VA1 answer
CUSTOMER CARE
A:
This Design Engineering Titanium Wrap part number 010129 with LR Technology, is made from pulverized lava rock and stranded into a fiber material and is engineered to be stronger than typical wraps on the market today. It has the ability to handle higher heat for improved performance and durability. It withstands 1800°F direct/2500°F radiant heat. High resistance to chemical & oil spills and abrasions. Helps to reduce temperature & vibration breakdown.Answered on 3/12/2012 by Steve from AAP
Q:
1) Is this wrap self-adhesive...wil it stay on by itself or do I need a separate component to keep it on?
2) Can I use it as a quick temporary fix on my rusty exhaust pipe?Asked on 2/16/2012 by Anonymous1 answer
CUSTOMER CARE
A:
No, this part Design Engineering Titanium Wrap, Part No. 010129 manufactured by Design Engineering is not self adhesive, The use of DEI's Stainless Steel Locking Ties is highly recommended to secure your exhaust wrap in place and providing a clean and professional. However, you can also use hose clamps or safety wire as alternatives to DEI Locking Tie. Yes, you can use it as a quick temporary fix on your rusty exhaust pipe. Also, Please check the installation instruction of this part Design Engineering Titanium Wrap, Part No. 010129 that has been sent to your mail address.Answered on 2/16/2012 by Aaron from AAP
Q:
my exhaust manifolds heat shields are rotting off. can i use this to wrap the lines close to the manifolds to protect them?Asked on 2/15/2012 by Anonymous1 answer
CUSTOMER CARE
A:
Yes, you can use this Design Engineering Titanium Wrap (Part No. 010129) to protect your exhasut manifold heat sheilds.Answered on 2/16/2012 by Dennis from AAP
Q:
Can you use this to cover a 1/4 inch gap between the exhaust manifold and the manifold pipe? Will it withstand the heat from the manifold?Asked on 12/14/2011 by Poor man from Pa1 answer
CUSTOMER CARE
A:
Yes, you can use it to cover the gap between the exhaust manifold and the manifold pipe and it will withstand extreme heat.Answered on 12/14/2011 by John the Car-Doc from AAP
Displaying questions 1-10Previous | Next »
Disclaimer
We strive to keep all information accurate and up-to-date; however, product availability, pricing, promotions and store hours are subject to change without notice. Please contact
Customer Care
if you have any questions or corrections.
