-
Your Store:
-
Hover over the image to zoom in
Mr. Gasket Valve Cover Grommets
Fit of this part varies by vehicle & equipment specs
One valve cover grommet, one PCV grommet. Molded from neoprene to ensure positive oil seal. Fits most stamped and die cast covers.
Product Features:
Back To Top
Product Features:
- Maxi-Seal Fiber Material
- Superior Blow-Out Resistance
- High-Tensile Strength
- Reduces Gasket Splitting
- Graphite Non-Wicking Rubber
- No Cork Particles
- Easy Removal For Disassembly
| Type: | Grommets |
| Material: | Rubber |
REVIEW SNAPSHOT®
by PowerReviewsMr. GasketGrommet Set for Breather and PCV Valve
(based on 5 reviews)
Ratings Distribution
50%
of respondents would recommend this to a friend.
REVIEWS
Reviewed by 5 customers
Sort by
Displaying reviews 1-5
Pros
- Easy To Install
Cons
- No cons
Best Uses
- Replacement
Comments about Mr. Gasket Grommet Set for Breather and PCV Valve:
Good rubber
Pros
- Durable
- Improves Down Force
- Lightweight
Cons
- Difficult To Install
Best Uses
- Replacement
- Restoration
Comments about Mr. Gasket Grommet Set for Breather and PCV Valve:
These fit the stock valve cover of a 1984 Chev C10 great!
They did take quite a bit of manipulation to install but once they are properly in they provide a great seal. The ones I removed were also very tough to remove and seemed to be of the same design. Maybe the other bad reviewers just did not try hard enough?
I am a full time Technician and they took some manipulation to get in but I was happy with the end result!
Bottom Line Yes, I would recommend this to a friend
Images shared by DSMer
Was this review helpful? Yes / No
- You may also flag this review
Pros
Cons
- Difficult To Install
Best Uses
Comments about Mr. Gasket Grommet Set for Breather and PCV Valve:
Could not use it. It was the wrong size for the valve cover.
Pros
Cons
Best Uses
Comments about Mr. Gasket Grommet Set for Breather and PCV Valve:
Comes up with this part when searching for a cadillac. But this part is incorrect and does not fit.
- Car & Truck:
- Mechanic
Pros
Cons
- Did not fit
Best Uses
Comments about Mr. Gasket Grommet Set for Breather and PCV Valve:
Did not fit my 95 4.6L ford mercury
Displaying reviews 1-5
Do you have questions about this product?(earn points for answers!)
Ask a question, get answers from real customers and in-house experts. Or contact Customer Care by email or call 1-877-238-2623.
7 Questions | 7 Answers
Displaying questions 1-7
Q:
will this work on a 2000 F150 4.2Asked on 4/11/2012 by Anonymous1 answer
CUSTOMER CARE
A:
This part Mr. Gasket Grommet Set for Breather and PCV Valve, Part No. 6376 manufactured by Mr. Gasket is universal and not a direct fit for your vehicle 2000 F150 4.2 . This is a one size fits most, slight modification may be required.Answered on 4/12/2012 by Aaron from AAP
Q:
Will this fit a 1994 Jeep Cherokee 4.0 H.O.Asked on 7/2/2011 by 123 Chubbs from Richfield PA1 answer
CUSTOMER CARE
A:
This part is universal and not a direct fit for your vehicle. This is a one size fits most.Answered on 7/4/2011 by Steve from AAP
Q:
Does this fit the valve cover for a 2000 Saab 9-5 with the 2.3L?Asked on 6/27/2011 by Anonymous1 answer
CUSTOMER CARE
A:
This part is universal and not a direct fit for your vehicle. This is a one size fits most.Answered on 6/28/2011 by DIY Daniel from AAP
Q:
do they fit a 1996 chevy c1500 4.3 vortec plastic valve coverAsked on 2/20/2011 by Anonymous1 answer
CUSTOMER CARE
A:
This part is universal and not a direct fit for your vehicle. This is a one size fits most.Answered on 2/22/2011 by Parts Guru Geo from AAP
Q:
does this fit a 1987 2.5 jeep valve coverAsked on 1/13/2011 by woody1 answer
CUSTOMER CARE
A:
Yes, this part fits your 1987 2.5 jeep valve cover.Answered on 4/10/2011 by David the Dynamite Parts Guy from AAP
Q:
does this work with the ccv on a 1987 cherokee.Asked on 10/13/2010 by vince in newbern from pulaski , Va.1 answer
CUSTOMER CARE
A:
If the CCV hole is the size of 1.22 in. Outside Diameter, 1 in.\/.75 in. Inside Diameter.Answered on 10/14/2010 by kevin the king of auto parts. from AAP
Q:
Could you please add dimensional info for grommets, e.g. larger dia. fits 1-1/4 in. hole. Smaller dia. is 1 in.???Asked on 4/5/2010 by Pup from Columbus, IN1 answer
CUSTOMER CARE
A:
Breather/PCV, 1.22 in. Outside Diameter, 1 in./.75 in. Inside DiameterAnswered on 4/8/2010 by Mike from AAP
Displaying questions 1-7
Disclaimer
We strive to keep all information accurate and up-to-date; however, product availability, pricing, promotions and store hours are subject to change without notice. Please contact
Customer Care
if you have any questions or corrections.
