-
Your Store:
-
Hover over the image to zoom in
Bondo Glazing & Spot Putty, 4.5 oz, 6 Per Case
Bondo Glazing & Spot Putty is a 1-part putty that fills imperfections, pinholes in body filler, scratches, paint chips and minor dings. Can be used with other auto body repair materials. Sandable in only 30 minutes.
Product Features:
Back To Top
Product Features:
- Great for filling pinholes in body filler or minor cracks and holes in almost any surface
- Can be sanded and painted
- 4.5 oz
| Type: | Putty |
| Volume (oz.): | 4.5 |
| Container Type: | Tube |
REVIEW SNAPSHOT®
by PowerReviewsBondoGlazing and Spot Putty (4.5 oz.)
(based on 1 review)
Ratings Distribution
REVIEWS
Reviewed by 1 customer
Displaying review 1
Pros
- Very easy to use
Cons
Best Uses
Comments about Bondo Glazing and Spot Putty (4.5 oz.):
Very easy to use
Displaying review 1
Do you have questions about this product?(earn points for answers!)
Ask a question, get answers from real customers and in-house experts. Or contact Customer Care by email or call 1-877-238-2623.
9 Questions | 10 Answers
Displaying questions 1-9
Q:
Does this product need to be mixed with a hardening agent?Asked on 6/5/2013 by Bill1 answer
CUSTOMER CARE
A:
Bondo Glazing & Spot Putty, 4.5 oz, 6 Per Case (Part No. 907) instructions for applying : Sand the surface of the damaged area with 600-grit sandpaper. Wipe sanding dust from the area with a clean rag. Make sure the rag does not contain oil or grease. Squeeze a two inch long line of Bondo Glazing & Spot Putty onto the thin blade of a plastic putty applicator. Drag the plastic putty applicator across the damaged area to spread the glazing spot putty. Smooth the putty on the damaged area. Allow the putty to cure for 30 minutes or until hard to the touch. Blend the putty into the damaged area by sanding it with 200-grit sandpaper. Wipe sanding dust from the blended putty. Run a bare hand across the repair. Apply additional spot putty if needed to create a smooth surface. Hold the nozzle of an aerosol spray can eight inches from the surface of the repair. Spray an even coat of primer on the repaired area. For further assistance, please feel free to call us at 1-877-238-2623 or visit your nearest Advance Auto Parts store and one of our representatives would be more than happy to assist you.Answered on 6/5/2013 by Steve from AAP
Q:
Can this be used on plastic or fiberglass car fenders?Asked on 9/13/2012 by A1 answer
CUSTOMER CARE
A:
This Bondo Glazing and Spot Putty (4.5 oz.) (Part No. 907) is a 1-part putty that fills imperfections, pinholes in body filler, scratches, paint chips and minor dings. Can be used with other auto body repair materials. It can be used on metals, wood and fiberglass. For further assistance, please feel free to call us at 1-877-238-2623 or visit your nearest Advance Auto Parts store and one of our representatives would be more than happy to assist you.Answered on 9/13/2012 by Steve from AAP
Q:
Do i have to paint or sand after using this product from another door ding ?Asked on 6/28/2012 by Alice from 280251 answer
CUSTOMER CARE
A:
Instructions: Sand the surface of the damaged area with 600-grit sandpaper. Wipe sanding dust from the area with a clean rag. Make sure the rag does not contain oil or grease. Squeeze a two inch long line of Bondo Glazing & Spot Putty onto the thin blade of a plastic putty applicator. Drag the plastic putty applicator across the damaged area to spread the glazing spot putty. Smooth the putty on the damaged area. Allow the putty to cure for 30 minutes or until hard to the touch. Blend the putty into the damaged area by sanding it with 200-grit sandpaper. Wipe sanding dust from the blended putty. Run a bare hand across the repair. Apply additional spot putty if needed to create a smooth surface. Hold the nozzle of an aerosol spray can eight inches from the surface of the repair. Spray an even coat of primer on the repaired area. For further assistance, please feel free to call us at 1-877-238-2623 or visit your nearest Advance Auto Parts store and one of our representatives would be more than happy to assist you.Answered on 6/28/2012 by Steve from AAP
Q:
Before putting Glazing and Spot Putty i will sand the affected area to remove any rust then applied the putty let it dry and sand again after that applied primer and then paint...is this correct?Asked on 4/29/2012 by Joe from Florida1 answer
CUSTOMER CARE
A:
Sand the surface of the damaged area with 600-grit sandpaper. Wipe sanding dust from the area with a clean rag. Make sure the rag does not contain oil or grease. Squeeze a two inch long line of Bondo Glazing & Spot Putty onto the thin blade of a plastic putty applicator. Drag the plastic putty applicator across the damaged area to spread the glazing spot putty. Smooth the putty on the damaged area. Allow the putty to cure for 30 minutes or until hard to the touch. Blend the putty into the damaged area by sanding it with 200-grit sandpaper. Wipe sanding dust from the blended putty. Run a bare hand across the repair. Apply additional spot putty if needed to create a smooth surface. Hold the nozzle of an aerosol spray can eight inches from the surface of the repair. Spray an even coat of primer on the repaired area.Answered on 5/1/2012 by Vincent from AAP
Q:
Could this prodcut be used to fill in a dent larger than a quarter, but smaller than a 50 cent piece, and about 1/8" deep?Asked on 10/18/2011 by Anonymous2 answers
CUSTOMER CARE
A:
Bondo Glazing & Spot Putty is a 1-part putty that fills imperfections, pinholes in body filler, scratches, paint chips and minor dings. Can be used with other auto body repair materials.Answered on 10/19/2011 by Aaron from AAPCUSTOMER CARE
A:
Bondo Glazing & Spot Putty is a 1-part putty that fills imperfections, pinholes in body filler, scratches, paint chips and minor dings. Can be used with other auto body repair materials.Answered on 10/19/2011 by Aaron from AAP
Q:
is this waterproof and can stick to the body firmly?Asked on 7/25/2011 by Anonymous from troy,mi1 answer
CUSTOMER CARE
A:
Yes, this is water proof and sticks to the body firmly.Answered on 7/27/2011 by Vincent from AAP
Q:
Can i use this product to repair wood and be able to place a screw through the bondo?Asked on 6/6/2011 by New at this from Overland Park1 answer
CUSTOMER CARE
A:
Yes, this can be used in wood.Answered on 6/21/2011 by DIY Daniel from AAP
Q:
will this product work on small rust holes in bodyAsked on 5/7/2011 by papaw5 from springfield, mo1 answer
CUSTOMER CARE
A:
Yes, this product will work on pinholes in body filler, rust holes, scratches, paint chips and minor dings.Answered on 5/13/2011 by Just Ask Jacob! from AAP
Q:
Can this stuff be painted over after it hardensAsked on 9/28/2010 by Anonymous1 answer
CUSTOMER CARE
A:
Yes you should be able to paint over this.Answered on 9/28/2010 by Kevin the King of Auto Parts. from AAP
Displaying questions 1-9
Disclaimer
We strive to keep all information accurate and up-to-date; however, product availability, pricing, promotions and store hours are subject to change without notice. Please contact
Customer Care
if you have any questions or corrections.
