Master Cylinder - Domestic
Hover over the image to zoom in
Share this:

Wearever Master Cylinder Master Cylinder - Domestic

Part No. 10-1854 Warranty Details  

See if this part fits a specific vehicle.

Check Vehicle Fit

Wearever Remanufactured Master Cylinders provide reliable performance at the best price. All units are tested before leaving the factory to ensure like-new performance, providing a quality product you and your vehicle can rely on. Bleeding kits are provided for your convenience, allowing you to spend less time in the garage, and more time on the road. Couple this with Wearever's Master Cylinder Bench Bleeder Tool, which cuts typical bleeding procedures in half.

Product Features:
  • 100% computer testing ensures guaranteed, consistent performance
  • 100% new OE-quality seals and cups are installed to prevent leakage and ensure like-new performance and reliability. All rubber meets S.A.E. specifications
  • Bleeding tubes are supplied with applicable applications to make the bleeding process faster and easier
  • Bores meet critical micro-finish specifications to eliminate pitting and corrosion, which could cause premature failure
  • Cast iron master cylinders come with premium protective coating to minimize rust, extending on-car and on-shelf life
  • Piston assemblies are 100% height-gauged to meet or exceed O.E.M. performance
  • Plastic reservoirs are 100% vacuum-tested to ensure proper function
Back To Top
Bore Diameter (N):1.000"
Reservoir Type:Integral
Product Condition:Remanufactured
Mounting Hole Quantity:2
Installation Hardware Included:No
Package Contents:Master Cylinder
Port Count:2
Primary Port Size:9/16 x 18
Secondary Port Size:7/16 x 24
Master Cylinder Color/Finish:Gray
Reservoir Included:Yes
Reservoir Material:Cast Iron
Master Cylinder Material:Cast Iron

REVIEW SNAPSHOT®

by PowerReviews
Wearever Master CylinderMaster Cylinder - Domestic
 
3.8

(based on 10 reviews)

Ratings Distribution

  • 5 Stars

     

    (5)

  • 4 Stars

     

    (2)

  • 3 Stars

     

    (0)

  • 2 Stars

     

    (2)

  • 1 Stars

     

    (1)

80%

of respondents would recommend this to a friend.

Pros

  • Easy to install (6)
  • No fade (3)

Cons

No Cons

Best Uses

  • Replacement (8)
  • Everyday driving (6)
    • Reviewer Profile:
    • Casual driver (4), Auto enthusiast (3), Truck enthusiast (3)

Most Liked Positive Review

 

Works great and Cheap

I was surprised at the price, super cheap. Looks just as heavy duty as the original. Just a side note- it is not painted I used some black engine enamel to make it...Read complete review

I was surprised at the price, super cheap. Looks just as heavy duty as the original. Just a side note- it is not painted I used some black engine enamel to make it look better. Just remember to bench bleed.

VS

Most Liked Negative Review

 

Warning!!!

Turned in core at time of purchase, bench bled new cylinder, and installed on booster.
The rear brake line fitting didn't fit, too small.
Returned to store and they brought out...Read complete review

Turned in core at time of purchase, bench bled new cylinder, and installed on booster.
The rear brake line fitting didn't fit, too small.
Returned to store and they brought out another cylinder but it was the same. They didn't have an adapter to fit the brake line and cylinder either.
Also, I wasted a half quart of brake fluid but they just shrugged that off.
This is the second cylinder that I've installed on this truck in the twenty years of ownership.
Bottom line is that this master cylinder is not a drop in replacement.

Will have to wait till tomorrow to go a real parts house.

Reviewed by 10 customers

Displaying reviews 1-10

Back to top

(0 of 1 customers found this review helpful)

 
4.0

Very Nice

By 

from Ottawa, KS

See all my reviews

Ask me a question

Verified Buyer
3 or more reviews submitted

Pros

  • Fair Price
  • Good Quality

Cons

    Best Uses

    • Original Replacement

    Comments about Wearever Master Cylinder Master Cylinder - Domestic:

    THis is a like for like replacement for original model and bolts up great to the brake booster.

    • Was this a gift?:
    • No

    (1 of 1 customers found this review helpful)

     
    5.0

    Works great and Cheap

    By 

    from Altmar NY

    About Me Casual Driver

    See all my reviews

    3 or more reviews submitted

    Pros

    • Easy To Install

    Cons

      Best Uses

      • Replacement

      Comments about Wearever Master Cylinder Master Cylinder - Domestic:

      I was surprised at the price, super cheap. Looks just as heavy duty as the original. Just a side note- it is not painted I used some black engine enamel to make it look better. Just remember to bench bleed.

      (1 of 1 customers found this review helpful)

       
      5.0

      Master cylinder

      By 

      from Clearwater,S.C.

      About Me Casual Driver

      Verified Buyer

      Pros

      • Decreased Stopping Distance
      • Easy To Install
      • Lightweight
      • No Fade

      Cons

        Best Uses

        • Everyday Driving
        • Replacement

        Comments about Wearever Master Cylinder Master Cylinder - Domestic:

        Perfect fit for my 1986 Ford F-159

        (1 of 1 customers found this review helpful)

         
        5.0

        Direct Fit

        By 

        from GA

        About Me Auto Enthusiast

        See all my reviews

        Ask me a question

        3 or more reviews submitted

        Pros

        • Easy To Install

        Cons

          Best Uses

          • Everyday Driving
          • Replacement
          • Restoration

          Comments about Wearever Master Cylinder Master Cylinder - Domestic:

          Worked great and was easy to bleed.

          (1 of 1 customers found this review helpful)

           
          5.0

          Fit well, worked great.

          By 

          from Macon Ga.

          About Me Casual Driver

          Verified Buyer

          Pros

          • Easy To Install
          • Lightweight
          • No Fade

          Cons

            Best Uses

            • Everyday Driving
            • Replacement

            Comments about Wearever Master Cylinder Master Cylinder - Domestic:

            The master cylinder fit perfectly and was easy to bleed and get in operation.

            (1 of 1 customers found this review helpful)

             
            5.0

            works great so far

            By 

            from Fl.

            About Me Auto Enthusiast, Mechanic, Truck Enthusiast

            See all my reviews

            Verified Buyer

            Pros

            • Easy To Install

            Cons

              Best Uses

              • Everyday Driving
              • Replacement

              Comments about Wearever Master Cylinder Master Cylinder - Domestic:

              seemed to bench bleed good. I wish they still come with the bleeder kits that have the hoses

              (1 of 2 customers found this review helpful)

               
              2.0

              Should have bought a new one

              By 

              from Richmond VA

              About Me Auto Enthusiast, Truck Enthusiast

              See all my reviews

              Ask me a question

              Verified Buyer
              3 or more reviews submitted

              Pros

                Cons

                • Didn't Work
                • Difficult To Install

                Best Uses

                • Everyday Driving
                • Replacement

                Comments about Wearever Master Cylinder Master Cylinder - Domestic:

                Got rebuild, bench bled it per instructions, installed it and wasted 3 hours until we finely decided to try another one. They had it in stock. took 1/2 hour to bench bleed it and get the brakes working. Should have listened to other posts and passed on this for a new one. Not worth the time and wasted brake fluid. I gave it a 2 because second one works fine.

                 
                2.0

                Mixed review

                By 

                from Palatka FL

                See all my reviews

                Verified Buyer
                3 or more reviews submitted

                Comments about Wearever Master Cylinder Master Cylinder - Domestic:

                Very important to bench bleed before installing. It took three masters before I found one that would bleed from the front brake reservoir at all (on bench, not in vehicle), and that one only bled slowly by gravity, not by pumping the cylinder. Once bled however it installs quickly with no fitment issues and functions well. I recommend it only because it's the only brand Advance carries and their service policy allows me to test and return as many as necessary to find a good one.

                (1 of 1 customers found this review helpful)

                 
                4.0

                STOP IT!!

                By 

                from Bryson City, NC

                About Me Casual Driver, Mechanic, Truck Enthusiast

                See all my reviews

                Verified Buyer
                Helpful Reviewer

                Pros

                • Decreased Stopping Distance
                • Easy To Install
                • No Fade

                Cons

                  Best Uses

                  • Everyday Driving
                  • Replacement
                  • Restoration

                  Comments about Wearever Master Cylinder Master Cylinder - Domestic:

                  In stock, run of the mill reman part.

                  (6 of 8 customers found this review helpful)

                   
                  1.0

                  Warning!!!

                  By 

                  from Clover, SC

                  Pros

                    Cons

                    • Difficult To Install

                    Best Uses

                    • Replacement

                    Comments about Wearever Master Cylinder Master Cylinder - Domestic:

                    Turned in core at time of purchase, bench bled new cylinder, and installed on booster.
                    The rear brake line fitting didn't fit, too small.
                    Returned to store and they brought out another cylinder but it was the same. They didn't have an adapter to fit the brake line and cylinder either.
                    Also, I wasted a half quart of brake fluid but they just shrugged that off.
                    This is the second cylinder that I've installed on this truck in the twenty years of ownership.
                    Bottom line is that this master cylinder is not a drop in replacement.

                    Will have to wait till tomorrow to go a real parts house.

                    • Car & Truck:
                    • Mechanic

                    Displaying reviews 1-10

                    Back to top

                    Do you have questions about this product?

                     

                    Ask a question, get answers from real customers and in-house experts. For further assistance, please review your support options on our Contact Us page.

                    1 Question | 1 Answer
                    Displaying question 1
                    • Q:

                      is it possible to bleed master cylinder once installed?
                      Asked on 11/3/2010 by Animal from clarksville, tn

                      1 answer

                      • CUSTOMER CARE

                        A:

                        You most likely could but it would be best to bench bleed it first and then install.

                        Answered on 11/3/2010 by Mike the Auto Parts Master from AAP
                    Displaying question 1

                    Do you have a question about this product? 

                    Check out the specials in our monthly flyer.
                     
                     
                    Disclaimer We strive to keep all information accurate and up-to-date; however, product availability, pricing, promotions and store hours are subject to change without notice. Please contact Customer Care if you have any questions or corrections.