Unloaded Caliper w/Bracket -Import
Hover over the image to zoom in
Unloaded Caliper w/Bracket -Import Unloaded Caliper w/Bracket -Import
Share this:

Wearever Brake Caliper Unloaded Caliper w/Bracket -Import

Part No. 19-B1817 Warranty Details  

See if this part fits a specific vehicle.

Check Vehicle Fit

Wearever Remanufactured Friction Choice Brake Calipers are remanufactured to meet or exceed OEM performance. Each caliper includes all hardware needed for easy installation (mounting bolts not included). Wearever's caliper hardware allows for quick and easy installation because you no longer need to search for replacement components or reuse old hardware. Also, all rear parking brake hardware is installed and lubricated for your convenience, where applicable.
Back To Top
Bracket Included:Yes
Caliper Material:Cast Iron
Casting Material:Iron
Finish:Blasting + Anti-Rust
Hardware Included:Yes
Inlet Port Diameter:M10 x 1.0
Installation Hardware Included:Yes
Mounting Bolts Included:No
Mounting Hardware Included:No
O.E.M. Replacement:Yes
Package Contents:Caliper, Bracket, Hardware Kit
Pads Included:No
Performance Rated:No
Piston Material:Steel
Piston Quantity:1

REVIEW SNAPSHOT®

by PowerReviews
Wearever Brake CaliperUnloaded Caliper w/Bracket -Import
 
4.0

(based on 3 reviews)

Ratings Distribution

  • 5 Stars

     

    (1)

  • 4 Stars

     

    (1)

  • 3 Stars

     

    (1)

  • 2 Stars

     

    (0)

  • 1 Stars

     

    (0)

Reviewed by 3 customers

Displaying reviews 1-3

Back to top

 
5.0

I think I figured out why fits both side

By 

from Rochester, NY

About Me Casual Driver

See all my reviews

Pros

  • Easy To Install

Cons

    Best Uses

    • Everyday Driving
    • Replacement

    Comments about Wearever Brake Caliper Unloaded Caliper w/Bracket -Import:

    I think I figured out why some people have said these are not specified for correct side, it depends upon weather the caliper is mounted in front of strut or behind the strut position. Both SLC9217 and SLC9216 are correct for B5 Passats, it will depend on mounting position of caliper that will decide which side it will go on. My Passat has caliper mounted rear of shock and therefore the SLC9217 was for FL, if caliper is in front of shock this P/N would have been FR. The real only difference is position of brake line and bleeder, they need to be on the side of the caliper closest to shock, everything else exactly the same. I purchased both P/N's to replace the FL which was frozen but since the cost was reasonable and the quality of the rebuilt unit was very good I am going ahead and do the other side because on my 10 year old Passat the FR may freeze up also sooner than later.

    Comment on this reviewHelp Icon

    (2 of 2 customers found this review helpful)

     
    4.0

    vw passat this is for the left side.

    By 

    from Earth

    Comments about Wearever Brake Caliper Unloaded Caliper w/Bracket -Import:

    I was working on a 2000 vw passat 1.8T. AAP lists this a for the right side. It's really for the left side.

    Comment on this reviewHelp Icon

    (2 of 2 customers found this review helpful)

     
    3.0

    Make sure you get the correct side

    Pros

      Cons

      • Difficult To Install

      Best Uses

      • Replacement

      Comments about Wearever Brake Caliper Unloaded Caliper w/Bracket -Import:

      you have to use the orignal hard brake line which does not come off the old caliper very easily. This was for a VW, the driver side was really the pass side, because they fit Audi as well.

      • Car & Truck:
      • Casual Driver

      Comment on this reviewHelp Icon

      Displaying reviews 1-3

      Back to top

      Do you have questions about this product?

       

      Ask a question, get answers from real customers and in-house experts. For further assistance, please review your support options on our Contact Us page.

      2 Questions | 3 Answers
      Displaying questions 1-2
      • Q:

        Does this caliper fit the left or right side of a 1999 Audi A6 Quattro 2.8 V6?
        Asked on 11/20/2013 by Adam from Detroit, MI

        2 answers

        • CUSTOMER CARE

          A:

          Good question Adam! This Brake Caliper fits front right position of your vehicle.

          Answered on 11/20/2013 by Morgan from AAP
        • A:

          I can verify that this fits the RIGHT side of a 1999 Audi A6 Quattro 2.8 V6.

          Unfortunately, this isn't the whole story. Fortunately, I have figured out the issue for you. The correct answer is that the SLC9216 is for the Front Right on a 1999 Audi A6 (bear in mind this car has rearward-mounted calipers). Advance Auto needs to update their parts catalog to be more thorough.

          Caveat: If your car has the calipers forward-mounted (meaning when you are facing the brake rotor, the caliper grabs the rotor from the side of the axle towards the front of the car) then, this caliper is for the Front Left.

          So, the parts listing SHOULD read:

          SLC9216, rearward-mounted caliper, front right;
          OR forward-mounted caliper, front left.

          See my answer on the SLC9217 page for similar information.

          Answered on 11/21/2013 by Adam from Detroit, MI
      • Q:

        Does this caliper come with new hardware (bolt) that secures the metal bracket that holds the hydraulic and wear sensor connections? Or do you have to reuse the old bolt?
        Asked on 11/15/2013 by Adam from Detroit, MI

        1 answer

        • CUSTOMER CARE

          A:

          Hi Adam, great question! I researched and found that this brake caliper does not include mounting hardware with it.

          Answered on 11/17/2013 by Vincent from AAP
      Displaying questions 1-2

      Do you have a question about this product? 

      Check out the specials in our monthly flyer.
       
       
      Disclaimer We strive to keep all information accurate and up-to-date; however, product availability, pricing, promotions and store hours are subject to change without notice. Please contact Customer Care if you have any questions or corrections.