Unloaded Caliper - Import
Hover over the image to zoom in
Unloaded Caliper - Import
Share this:

Wearever Brake Caliper Unloaded Caliper - Import

Part No. 19-2766 Warranty Details  

See if this part fits a specific vehicle.

Check Vehicle Fit

Wearever Remanufactured Friction Choice Brake Calipers are remanufactured to meet or exceed OEM performance. Each caliper includes all hardware needed for easy installation (mounting bolts not included). Wearever's caliper hardware allows for quick and easy installation because you no longer need to search for replacement components or reuse old hardware. Also, all rear parking brake hardware is installed and lubricated for your convenience, where applicable.
Back To Top
Bracket Included:No
Caliper Material:Cast Iron
Casting Material:Iron
Finish:Blasting + Anti-Rust
Hardware Included:Yes
Inlet Port Diameter:M10 x 1.0
Installation Hardware Included:Yes
Mounting Bolts Included:No
Mounting Hardware Included:No
O.E.M. Replacement:Yes
Package Contents:Caliper, Hardware Kit
Pads Included:No
Performance Rated:No
Piston Material:Steel
Piston Quantity:4

REVIEW SNAPSHOT®

by PowerReviews
Wearever Brake CaliperUnloaded Caliper - Import
 
3.0

(based on 5 reviews)

Ratings Distribution

  • 5 Stars

     

    (1)

  • 4 Stars

     

    (0)

  • 3 Stars

     

    (3)

  • 2 Stars

     

    (0)

  • 1 Stars

     

    (1)

75%

of respondents would recommend this to a friend.

Pros

  • Easy to install (4)

Cons

No Cons

Best Uses

  • Everyday driving (3)
    • Reviewer Profile:
    • Auto enthusiast (3)

Reviewed by 5 customers

Displaying reviews 1-5

Back to top

(2 of 2 customers found this review helpful)

 
3.0

Good value for a bad design

By 

from Fairfax, VA

About Me Auto Enthusiast, Diyer

Pros

  • Easy To Install
  • Low cost

Cons

  • Poor Oem Design

Best Uses

  • Everyday Driving

Comments about Wearever Brake Caliper Unloaded Caliper - Import:

OK, first off, if you're purchasing front brake calipers for your 4th Generation 4Runner, get used to it because the design is horrible and you're going to be doing it again. Both my front original Toyota OEM calipers only lasted about 70K miles before they seized and had to be replaced. Purchased these from Advance Auto and they lasted about 40K miles...used the warranty and got new ones and they lasted about another 40K miles. Now I have another one that has seized and I'll do the same thing. These 4Runner calipers are junk (even NEW ones from Toyota)--regardless of where you buy them, so why not just buy the cheapest ones you can that have a lifetime warranty? There are HUNDREDS of posts on 4Runner forums about people having the same issue. Look at the bright side, it's an opportunity to flush your brake fluid every 2 years.
When you purchase, just make sure you know what your casting number is: 13WG fits the smaller rotor diameter (318mm I believe) and 13WH fits the larger rotors (330mm). If you're unsure, stick your phone behind your wheel and snap a picture of the caliper, you'll see it.

Comment on this reviewHelp Icon

 
1.0

Failed after 23K miles

By 

from PA

About Me Auto Enthusiast

Pros

  • Easy To Install

Cons

    Best Uses

    • Everyday Driving

    Comments about Wearever Brake Caliper Unloaded Caliper - Import:

    I got the pair for the front and these calipers failed after 23K miles. The fronts froze up nearly causing me to have an accident.

    Comment on this reviewHelp Icon

    (2 of 2 customers found this review helpful)

     
    3.0

    best bang for the buck

    By 

    from new york

    About Me Auto Enthusiast, Casual Driver, Mechanic, Truck Enthusiast

    See all my reviews

    3 or more reviews submitted

    Pros

    • Easy To Install

    Cons

      Best Uses

      • Everyday Driving

      Comments about Wearever Brake Caliper Unloaded Caliper - Import:

      4th gen 4runners are known to have frozen front caliper pistons, these rebuilt ones seem decent.

      FYI 13WH is for 4runners with sport edition, or limited with 17" rims.

      Comment on this reviewHelp Icon

      (4 of 4 customers found this review helpful)

       
      3.0

      This 13WH will not fit 13WG

      By 

      from 28804

      About Me Casual Driver

      See all my reviews

      Ask me a question

      Verified Buyer
      Helpful Reviewer

      Pros

        Cons

        • Not Exact Fit As Describe
        • Not Fit 13wg

        Best Uses

          Comments about Wearever Brake Caliper Unloaded Caliper - Import:

          PART NOT EXACT FIT
          There are 2 sub-model of this part (13WH and 13WG) look for this number before you buy this. Should list the sub-model of this part in specification.
          THIS 13WH WILL NOT FIT 13WG MOUNT

          Comment on this reviewHelp Icon

           
          5.0

          disc caliper for 2006 toyota 4runner

          By 

          from Bel Air, MD

          About Me Mechanic

          See all my reviews

          Ask me a question

          Verified Buyer
          3 or more reviews submitted

          Pros

          • Easy To Install

          Cons

            Best Uses

            • Replacement

            Comments about Wearever Brake Caliper Unloaded Caliper - Import:

            beware of diffence mounting on WG, WH for difference models like limited/SR5

            Comment on this reviewHelp Icon

            Displaying reviews 1-5

            Back to top

            Check out the specials in our monthly flyer.
             
             
            Disclaimer We strive to keep all information accurate and up-to-date; however, product availability, pricing, promotions and store hours are subject to change without notice. Please contact Customer Care if you have any questions or corrections.