Brake Caliper with Mounting Bracket
Hover over the image to zoom in
Share this:

Wearever Brake Caliper Brake Caliper with Mounting Bracket

Part No. 18-B4729 Warranty Details  

See if this part fits a specific vehicle.

Check Vehicle Fit

Ready to Install Brake Caliper comes with pre installed mounting bracket along with new critical hardware to reduce installation time up to 40%. In addition limiting brake system noise and vibration issues that can be caused by reusing old components such as worn-out mounting brackets that no longer conforms to manufacture specifications due to wear and rust. All calipers are tested through a multi stage process to ensure leak-free operation and 100% compatibility between all components and the vehicle.

Product Features:
  • Pre Installed Mounting Bracket, reduces installation time by up to 40%
  • Hardware Included
  • 100% Pressure Tested
  • OE Grade Seals
  • Rust Inhibitor Coating
  • Pre-assembled, ready to install
Back To Top
Bracket included:Yes
Caliper Material:Cast Iron
Finish:Blasting + Anti-Rust
Hardware Included:Yes
Location:Front Left, Rear Left, Rear Right
Mounting Hardware Included:No
OE Replacement:Yes
Pads Included:No
Performance:No
Piston Material:Phenolic
Piston Quantity:2

REVIEW SNAPSHOT®

by PowerReviews
RemanufacturedBrake Caliper with Mounting Bracket
 
4.4

(based on 23 reviews)

Ratings Distribution

  • 5 Stars

     

    (15)

  • 4 Stars

     

    (4)

  • 3 Stars

     

    (2)

  • 2 Stars

     

    (2)

  • 1 Stars

     

    (0)

91%

of respondents would recommend this to a friend.

Pros

  • Easy to install (20)
  • Decreased stopping distance (6)
  • No fade (4)

Cons

    Best Uses

    • Everyday driving (15)
    • Replacement (13)
      • Reviewer Profile:
      • Mechanic (10), Casual driver (9), Auto enthusiast (8), Truck enthusiast (8)

    Most Liked Positive Review

     

    Stopping is easy

    I will never buy a lone naked caliper again. These assemblies come ready to toss in pads and install, no fuss no muss. Just a touch of lube and you're good to go....Read complete review

    I will never buy a lone naked caliper again. These assemblies come ready to toss in pads and install, no fuss no muss. Just a touch of lube and you're good to go. These include new pins and spacers already lubed and installed making the job easier than ever.

    VS

    Most Liked Negative Review

     

    Poor quality control

    Couldn't get bracket bolts loose for pad replacement. Store rep also tried without any luck. Slid bracket off of pins and you could see that they were never removed, just shot blasted and...Read complete review

    Couldn't get bracket bolts loose for pad replacement. Store rep also tried without any luck. Slid bracket off of pins and you could see that they were never removed, just shot blasted and coated while still on caliper. Caliper didn't even slide well on them. Advance ordered replacement. Also instructions stated to torque fasteners to factory specifications. Inlet hose bolt provided stretched and nearly broke well before reaching torque setting. Replaced with Dorman bolts without any issues.

    Reviewed by 23 customers

    Sort by

    Displaying reviews 1-10

    Back to top

    Previous | Next »

     
    5.0

    Easy with air impact tool

    By 

    from Johnsonburg, PA. 15845

    About Me Auto Enthusiast, Casual Driver, Lawn Care Driver, Truck Enthusiast

    Ask me a question

    Level 5

    Pros

    • Decreased Stopping Distance
    • Easy To Install

    Cons

    • Heavy
    • No Caliper Mounting Bolts

    Best Uses

      Comments about Remanufactured Brake Caliper with Mounting Bracket:

      For my 2004 Chevrolet Silverado 2500 HD Ext. Cab V-8, 6.0 Liter 4 X 4. I foound it easy to buy new pads to make it fully load. Used an air impact tool to remove caliper off Mounting Bracket to add the brake pads. Hard part was to remove the old one off truck. I rounded off Mounting Bracket I had to get Caliper Mounting Bracket Bolts from a hardware store. Due to Brake Caliper with Mounting Bracket did not come with new Caliper Mounting Bracket Bolts. That was an extra cost of 10 dollars and 60 cents each total of 21 dollars and 20 cents.

      Comment on this review(earn points)

      (2 of 5 customers found this review helpful)

       
      4.0

      BRAKE CALIPERS

      By 

      from MANHATTAN IL

      About Me Auto Enthusiast, Mechanic

      Verified Buyer
      Level 2

      Pros

      • Easy To Install
      • Lightweight

      Cons

        Best Uses

        • Everyday Driving

        Comments about Remanufactured Brake Caliper with Mounting Bracket:

        VERY FAIR PRICE

        Comment on this review(earn points)

        (0 of 2 customers found this review helpful)

         
        5.0

        Very Nice Product and an Easy Install

        By 

        from Mt. Vernon, IA

        About Me Auto Enthusiast, Casual Driver

        Verified Buyer
        Level 2

        Pros

        • Easy To Install

        Cons

          Best Uses

          • Everyday Driving
          • Replacement

          Comments about Remanufactured Brake Caliper with Mounting Bracket:

          Nice Product which made for a quick and easy install. The brakes work just like new again!

          Comment on this review(earn points)

          (5 of 8 customers found this review helpful)

           
          5.0

          Works great

          By 

          from Pine Grove, PA

          About Me Mechanic

          Helpful Reviewer

          Pros

          • Easy To Install

          Cons

            Best Uses

            • Replacement

            Comments about Remanufactured Brake Caliper with Mounting Bracket:

            Whoever decided to sell these calipers with the mounting bracket is Genius!! After breaking 2 torx bits and all my knuckles I finally removed the whole assembly and replaced. A bit of advice tho... Before you leave Advance Auto make sure you have/buy a good T55 torx bit and also 2 sets of H5078 Guide Pin Bolt Kits so when you finally do get the factory bolts out, you can throw them as far as you can!

            Comment on this review(earn points)

            (6 of 9 customers found this review helpful)

             
            4.0

            Stopping is easy

            By 

            from Endicott, NY

            About Me Advanced Dyi, Casual Driver, Truck Enthusiast

            Verified Buyer
            Level 3

            Pros

            • Decreased Stopping Distance
            • Easy To Install
            • No Fade

            Cons

              Best Uses

              • Everyday Driving
              • Replacement

              Comments about Remanufactured Brake Caliper with Mounting Bracket:

              I will never buy a lone naked caliper again. These assemblies come ready to toss in pads and install, no fuss no muss. Just a touch of lube and you're good to go. These include new pins and spacers already lubed and installed making the job easier than ever.

              Comment on this review(earn points)

              (5 of 9 customers found this review helpful)

               
              5.0

              This is a breeze with the bracket!

              By 

              from Massachusetts

              About Me Mechanic

              Verified Buyer
              Helpful Reviewer

              Pros

              • Easy To Install

              Cons

                Best Uses

                • Everyday Driving
                • Replacement

                Comments about Remanufactured Brake Caliper with Mounting Bracket:

                This caliper assembly was very easy to install. Thank goodness this came with the "hex head" caliper pins instead of the T-55 Torx pins. I twisted up 3 high quality Torx bits to complete the job on both the left and right sides. I was very happy to be able to loosen and remove the fourth and last one. Do yourself a favor: Buy the caliper with the bracket and pin assembly just like this one. New slide pin seals, new pins, new bleeder, and even a new banjo bolt w/copper crush washers. Bleed off a little bit of air and you are done!

                Comment on this review(earn points)

                (4 of 14 customers found this review helpful)

                 
                5.0

                Works Great, Fit's Like a Glove

                By 

                from Skaneateles NY

                About Me Casual Driver, Mechanic, Truck Enthusiast

                Verified Buyer
                Helpful Reviewer

                Pros

                • Decreased Stopping Distance
                • Easy To Install
                • Lightweight
                • No Fade

                Cons

                  Best Uses

                  • Everyday Driving
                  • Replacement

                  Comments about Remanufactured Brake Caliper with Mounting Bracket:

                  The best thing about this caliper is it came with replacement bolts with a hex head instead of the original Torx head bolts, the torx bit always breaks off when trying to remove the bolt. The hex head saved me a lot of money because when I last changed the pads I broke 3 $12.00 torx bits before I got it off.

                  Comment on this review(earn points)

                  (4 of 8 customers found this review helpful)

                   
                  5.0

                  time saver

                  By 

                  from Jackson Michigan

                  3 or more reviews submitted

                  Pros

                  • Easy To Install

                  Cons

                    Best Uses

                      Comments about Remanufactured Brake Caliper with Mounting Bracket:

                      made for ez fast install all new parts new slide bolts

                      Comment on this review(earn points)

                      (3 of 6 customers found this review helpful)

                       
                      3.0

                      Hardware not new

                      By 

                      from Olive Branch, MS

                      Helpful Reviewer

                      Pros

                        Cons

                        • Difficult To Install

                        Best Uses

                          Comments about Remanufactured Brake Caliper with Mounting Bracket:

                          I was changing pads out on my 2003 Tahoe and found one of the old front calipers TORX bolts were stuck tight. I had to use a 6 foot breaker bar and a C-Clamp to keep socket on, and still no luck. Took off caliper and noted the pins and slides were worn and so I ordered a new pair of remanufactured units. So when I get them, I find one caliper with brand new slider pins with hex heads (Yeah!!!), and the other caliper has someone else's frozen TORX bolts. So I installed that caliper to try to remove them and found I could not, as those TORX bolt heads were wallered out!! What a disappointment...

                          Comment on this review(earn points)

                          (3 of 4 customers found this review helpful)

                           
                          3.0

                          Worked as expected

                          By 

                          from Minnesota

                          About Me Casual Driver

                          Ask me a question

                          Verified Buyer
                          Level 3

                          Pros

                          • Easy To Install

                          Cons

                            Best Uses

                            • Everyday Driving

                            Comments about Remanufactured Brake Caliper with Mounting Bracket:

                            great replacement option

                            Comment on this review(earn points)

                            Displaying reviews 1-10

                            Back to top

                            Previous | Next »

                            Do you have questions about this product?(earn points for answers!)

                             

                            Ask a question, get answers from real customers and in-house experts. Or contact Customer Care by email or call 1-877-238-2623.

                            5 Questions | 7 Answers
                            Displaying questions 1-5
                            • Q:

                              My truck is a 2006 Chevy Z71 4WD 4D w/ 5.3 Vin is 2GCEK13Z86131109. No option for Z71 in drop-down. I entered Z as engine code. Says this is compatible. Is that true?
                              Asked on 11/19/2014 by Jeff

                              2 answers

                            • Q:

                              WHEN YOU BUY THE BRAKE CALIPERS IS THE PRICE GIVEN FOR BOTH SIDES OR JUST ONE SIDE?
                              Asked on 4/3/2014 by T Z from RURALVALLEY,PA.

                              1 answer

                              • CUSTOMER CARE

                                A:

                                Hi T Z! I see that this Brake Caliper with Mounting Bracket is sold individually.

                                Answered on 4/5/2014 by Vincent from AAP
                            • Q:

                              does this caliper work on 4wd models
                              Asked on 11/11/2013 by dsf from traverse city mi

                              1 answer

                              • CUSTOMER CARE

                                A:

                                Hi DSF, this caliper would fit various makes and models. To check the exact fit application, please provide us the year, make, model and engine size of your vehicle.

                                Answered on 11/12/2013 by Steve from AAP
                            • Q:

                              Isn't the SLC632 the front left caliper?
                              Asked on 12/2/2011 by Buck from Brick, NJ

                              1 answer

                              • CUSTOMER CARE

                                A:

                                No, this Fenco Brake Caliper (Part No. SLC632) works for Front left or right in some vehicles and also for Rear left or right in some vehicles. If you could please include the year make and model of the vehicle and we would be better able to assist you.

                                Answered on 12/2/2011 by Dennis from AAP
                            • Q:

                              Is front right the passenger side of the vehicle?
                              Asked on 6/21/2011 by Barry from Centreville, VA

                              2 answers

                              • CUSTOMER CARE

                                A:

                                Yes, Right side is the passenger side.

                                Answered on 6/22/2011 by DIY Daniel from AAP
                              • A:

                                no, you want to use slc633 for the front passenger side

                                Answered on 10/8/2011 by MarkG from Holland, IA
                            Displaying questions 1-5

                            Do you have a question about this product? 

                            Create or view your online garage

                            Check out the specials in our monthly flyer

                             
                             
                            Disclaimer We strive to keep all information accurate and up-to-date; however, product availability, pricing, promotions and store hours are subject to change without notice. Please contact Customer Care if you have any questions or corrections.