Brake Caliper with Mounting Bracket
Hover over the image to zoom in
Share this:

Wearever Brake Caliper Brake Caliper with Mounting Bracket

Part No. 18-B4646 Warranty Details  

See if this part fits a specific vehicle.

Check Vehicle Fit

Ready to Install Brake Caliper comes with pre installed mounting bracket along with new critical hardware to reduce installation time up to 40%. In addition limiting brake system noise and vibration issues that can be caused by reusing old components such as worn-out mounting brackets that no longer conforms to manufacture specifications due to wear and rust. All calipers are tested through a multi stage process to ensure leak-free operation and 100% compatibility between all components and the vehicle.

Product Features:
  • Pre Installed Mounting Bracket, reduces installation time by up to 40%
  • Hardware Included
  • 100% Pressure Tested
  • OE Grade Seals
  • Rust Inhibitor Coating
  • Pre-assembled, ready to install
Back To Top
Bracket included:Yes
Caliper Material:Aluminum
Finish:Blasting + Anti-Rust
Hardware Included:Yes
Location:Front Left
Mounting Hardware Included:No
OE Replacement:Yes
Pads Included:No
Performance:No
Piston Material:Steel
Piston Quantity:1

REVIEW SNAPSHOT®

by PowerReviews
RemanufacturedBrake Caliper with Mounting Bracket
 
4.3

(based on 14 reviews)

Ratings Distribution

  • 5 Stars

     

    (6)

  • 4 Stars

     

    (6)

  • 3 Stars

     

    (2)

  • 2 Stars

     

    (0)

  • 1 Stars

     

    (0)

100%

of respondents would recommend this to a friend.

Pros

  • Easy to install (11)
  • Decreased stopping distance (4)

Cons

No Cons

Best Uses

  • Everyday driving (12)
  • Replacement (9)
    • Reviewer Profile:
    • Casual driver (6)

Most Liked Positive Review

 

Works great

The GM recommended torque on the banjo bolts is 37 ft lbs. It is too high for this caliper, I recommend no more than 20 or you will strip out the hose fitting. ...Read complete review

The GM recommended torque on the banjo bolts is 37 ft lbs. It is too high for this caliper, I recommend no more than 20 or you will strip out the hose fitting. Google it

VS

Most Liked Negative Review

 

great, but need hose

Not EXACT as states. It replaces the original part, but hydraulic hose connector on original does not match to new connection. Had to purchase additional hose and grease for repair.
Remember to...Read complete review

Not EXACT as states. It replaces the original part, but hydraulic hose connector on original does not match to new connection. Had to purchase additional hose and grease for repair.
Remember to bleed the lines, not your fingers.

Reviewed by 14 customers

Sort by

Displaying reviews 1-10

Back to top

Previous | Next »

(2 of 5 customers found this review helpful)

 
4.0

Easy inatall.I would recommend this to a

By 

from Stanwood Mi

About Me Casual Driver

Verified Buyer
Level 1

Pros

  • Decreased Stopping Distance
  • Easy To Install

Cons

    Best Uses

    • Everyday Driving
    • Replacement

    Comments about Remanufactured Brake Caliper with Mounting Bracket:

    Great price Easy install.

    Comment on this review(earn points)

    (0 of 3 customers found this review helpful)

     
    3.0

    good

    By 

    from sunman in

    About Me Mechanic

    Verified Buyer
    Level 2

    Pros

    • Decreased Stopping Distance
    • Easy To Install

    Cons

    • Nono

    Best Uses

    • Everyday Driving

    Comments about Remanufactured Brake Caliper with Mounting Bracket:

    worked fine fixed prob

    Comment on this review(earn points)

    (2 of 5 customers found this review helpful)

     
    5.0

    Great Product

    By 

    from North Ridgeville Oh

    Verified Buyer
    3 or more reviews submitted

    Pros

    • Easy To Install

    Cons

      Best Uses

      • Everyday Driving

      Comments about Remanufactured Brake Caliper with Mounting Bracket:

      Great product and easy to install.....

      Comment on this review(earn points)

      (0 of 3 customers found this review helpful)

       
      4.0

      good

      By 

      from shelbyville, IN

      About Me Casual Driver

      Verified Buyer
      Level 2

      Pros

        Cons

          Best Uses

          • Everyday Driving

          Comments about Remanufactured Brake Caliper with Mounting Bracket:

          fast order pick up time

          Comment on this review(earn points)

          (2 of 5 customers found this review helpful)

           
          5.0

          great replacement great service frank!

          By 

          from michigan

          About Me Casual Driver

          Verified Buyer
          Level 1

          Pros

          • Decreased Stopping Distance
          • Easy To Install
          • Lightweight
          • No Fade

          Cons

            Best Uses

            • Everyday Driving
            • Replacement

            Comments about Remanufactured Brake Caliper with Mounting Bracket:

            Thank You Frank!

            Comment on this review(earn points)

            (14 of 25 customers found this review helpful)

             
            5.0

            Brake parts!

            By 

            from East Hampton,Ct

            About Me Casual Driver

            Ask me a question

            Verified Buyer
            Level 3

            Pros

            • Decreased Stopping Distance
            • Easy To Install

            Cons

              Best Uses

              • Everyday Driving
              • Replacement

              Comments about Remanufactured Brake Caliper with Mounting Bracket:

              Easy online purchase, and easy to install!

              Comment on this review(earn points)

              (14 of 24 customers found this review helpful)

               
              4.0

              Works great

              By 

              from MD

              About Me Fixxer Dude

              Verified Buyer
              Level 2

              Pros

              • Easy To Install

              Cons

              • Gm Torque For Banjo Bolt

              Best Uses

              • Replacement

              Comments about Remanufactured Brake Caliper with Mounting Bracket:

              The GM recommended torque on the banjo bolts is 37 ft lbs. It is too high for this caliper, I recommend no more than 20 or you will strip out the hose fitting. Google it

              Comment on this review(earn points)

              (15 of 27 customers found this review helpful)

               
              4.0

              best bang for your buck

              By 

              from whitmore lake michigan

              About Me Casual Driver

              Verified Buyer
              Level 2

              Pros

              • Easy To Install

              Cons

                Best Uses

                • Everyday Driving
                • Replacement

                Comments about Remanufactured Brake Caliper with Mounting Bracket:

                did have to return one caliper next day before installation no banjo bolt and the banjo bolt hole improperly threaded

                Comment on this review(earn points)

                (12 of 24 customers found this review helpful)

                 
                5.0

                Good quality part.

                By 

                from Midlothian,Va.

                About Me Auto Enthusiast, Truck Enthusiast

                Ask me a question

                Level 4

                Pros

                • Easy To Install
                • Exact fit

                Cons

                • None

                Best Uses

                • Everyday Driving
                • Replacement
                • Restoration

                Comments about Remanufactured Brake Caliper with Mounting Bracket:

                Easy to install. Don't forget to grease the slider pins.

                Comment on this review(earn points)

                (11 of 25 customers found this review helpful)

                 
                3.0

                great, but need hose

                By 

                from Columbus, OH

                About Me Casual Driver

                Level 2

                Pros

                • Easy To Install

                Cons

                  Best Uses

                  • Everyday Driving

                  Comments about Remanufactured Brake Caliper with Mounting Bracket:

                  Not EXACT as states. It replaces the original part, but hydraulic hose connector on original does not match to new connection. Had to purchase additional hose and grease for repair.
                  Remember to bleed the lines, not your fingers.

                  Comment on this review(earn points)

                  Displaying reviews 1-10

                  Back to top

                  Previous | Next »

                  Do you have questions about this product?(earn points for answers!)

                   

                  Ask a question, get answers from real customers and in-house experts. Or contact Customer Care by email or call 1-877-238-2623.

                  7 Questions | 7 Answers
                  Displaying questions 1-7
                  • Q:

                    I recently bought replacement brake calipers, Part No. 18-B4646 What are the torque specs for this product? The only ones included in the internal packaging are for the bleeder screw. I'm installing these new calipers on an 03 Chevy Malibu 3.1L. Specifically, torque specs for caliper mounting bracket bolt and banjo bolt connecting the brake line to the caliper?
                    Asked on 7/27/2015 by ESANDY

                    1 answer

                    • CUSTOMER CARE

                      A:

                      Hi Esandy, I'm glad to assist you! The torque specification for front brake caliper mounting bracket bolts is 85 ft.lbs and the brake hose to brake caliper bolt is 37 ft.lbs for your 2003 Chevrolet Malibu 3.1L.

                      Answered on 7/28/2015 by Steve from AAP
                  • Q:

                    What are the torque specs for this product? The only ones included in the internal packaging are for the bleeder screw.
                    Asked on 7/26/2015 by ESANDY

                    1 answer

                    • CUSTOMER CARE

                      A:

                      Hi ESANDY, to further assist with the part number 18-B4646, please provide us the year, make, model and engine size of your vehicle.

                      Answered on 7/26/2015 by Steve from AAP
                  • Q:

                    Is this caliper compatable with an oem break hose?
                    Asked on 10/19/2014 by Takkun from Muskegon, MI

                    1 answer

                    • CUSTOMER CARE

                      A:

                      Hi Takkun, good question! Yes, this is an OE replacement brake caliper. However, this is vehicle specific. To check compatibility, please provide us with the details of your application (including the year, make and model).

                      Answered on 10/20/2014 by Solomon
                  • Q:

                    Do the pins come already greased?
                    Asked on 3/24/2014 by Jo from Dayton, OH

                    1 answer

                    • CUSTOMER CARE

                      A:

                      Hi Jo, glad to assist you! Yes, the caliper guide pin should be pre-greased.

                      Answered on 3/25/2014 by Steve from AAP
                  • Q:

                    Does this product come with the rubber line that runs off of the caliper?
                    Asked on 10/14/2013 by Cody

                    1 answer

                    • CUSTOMER CARE

                      A:

                      Hi Cody, this Remanufactured Brake Caliper with Mounting Bracket -part# SLC450 includes only the mounting bracket.

                      Answered on 10/14/2013 by Vincent from AAP
                  • Q:

                    how do i get the old one off?
                    Asked on 10/1/2010 by Terry from Omaha, Ne

                    1 answer

                    • CUSTOMER CARE

                      A:

                      For help with your project, I recommend getting a repair manual specifically for your vehicle. It should be able to help you with detailed instructions on how to do many things.

                      Answered on 10/1/2010 by Mike from AAP
                  • Q:

                    how do you determine left from the right side of a car
                    Asked on 8/20/2010 by Phylando from New York

                    1 answer

                    • CUSTOMER CARE

                      A:

                      The driver side is the left and the passenger side is the right. It is as if you were sitting in the car.

                      Answered on 8/24/2010 by Kevin from AAP
                  Displaying questions 1-7

                  Do you have a question about this product? 

                  Create or view your online garage

                  Check out the specials in our monthly flyer

                   
                   
                  Disclaimer We strive to keep all information accurate and up-to-date; however, product availability, pricing, promotions and store hours are subject to change without notice. Please contact Customer Care if you have any questions or corrections.