Flanged Vented CW/CCW Blower Motor w/o Wheel
Hover over the image to zoom in
Flanged Vented CW/CCW Blower Motor w/o Wheel Flanged Vented CW/CCW Blower Motor w/o Wheel Flanged Vented CW/CCW Blower Motor w/o Wheel
Share this:

ToughOne or Factory Flanged Vented CW/CCW Blower Motor w/o Wheel

Part No. 35016 Warranty  

See if this part fits a specific vehicle.

Check Vehicle Fit

Please note: Advance Auto Parts is proud to carry comparable exact-fit parts from multiple vendors, as such, the item you receive may be one of two quality brands. Both brands meet the same fitment requirements and are equal in their performance and specifications.

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Factory Air.

Product Features:
  • Meets or exceeds OE design and performance
  • Magnetic size and properties compare or exceed OEM
  • Windings meet or exceed OEM specifications
  • Motor RPM equivalent to or exceeds OEM motor
Back To Top
Dual Shaft:No
Flange:Yes
Motor Diameter:3.25 in
Motor Length:4.3125 in
OE Replacement:Yes
Rotation:REV
Shaft Diameter:.3125 in
Shaft Length:1.4375 in
Terminal Connection:No
Vented:Yes
Wheel(s) Included:No
Wire Or Terminal Connection Type:2 Lead Wires

REVIEW SNAPSHOT®

by PowerReviews
Factory AirBlower Motor
 
4.8

(based on 12 reviews)

Ratings Distribution

  • 5 Stars

     

    (10)

  • 4 Stars

     

    (2)

  • 3 Stars

     

    (0)

  • 2 Stars

     

    (0)

  • 1 Stars

     

    (0)

100%

of respondents would recommend this to a friend.

Pros

  • Easy to install (9)
  • Durable (6)

Cons

    Best Uses

    • Replacement (7)
    • Everyday driving (4)
      • Car & Truck:
      • Auto enthusiast (3)

    Reviewed by 12 customers

    Sort by

    Displaying reviews 1-10

    Back to top

    Previous | Next »

     
    4.0

    Direct replacement

    By phantomphixer

    from Yuma, AZ

    About Me Aircraft Mechanic, Truck Enthusiast

    Verified Buyer
    Level 1

    Pros

    • Easy To Install

    Cons

      Best Uses

      • Everyday Driving
      • Replacement

      Comments about Factory Air Blower Motor:

      Bolted right end. You have to fumble with the existing foam seal. I temporarily plugged in the connector wires to check for correct polarity. Then installed the mating connector and finished.
      Appx 20 mins start to finish.

      Comment on this review(earn points)

      (2 of 2 customers found this review helpful)

       
      5.0

      Fixed my problem

      By Eddie the welder

      from Waxhaw, NC

      Verified Buyer
      Level 1

      Pros

      • Easy To Install

      Cons

        Best Uses

        • Replacement

        Comments about Factory Air Blower Motor:

        Fan stopped working on my 99 f-450 7.3 diesel truck. After checking fuses to find all was well and relays, I decided to just go ahead and purchase this item. In stock at my local store. Ordered online and picked up at store.
        Easy install, works like a new one. Very pleased.

        Comment on this review(earn points)

         
        5.0

        Perfect Fit less than 30 mins to replace

        By Smitty

        from Greenwood SC

        About Me Auto Enthusiast

        Ask me a question

        Verified Buyer
        Level 1

        Pros

        • Easy To Install

        Cons

          Best Uses

            Comments about Factory Air Blower Motor:

            Perfect Fit less than 30 mins to replace

            Comment on this review(earn points)

             
            5.0

            Great replacement for OEM

            By Nicmike

            from Austin, TX

            About Me DIY, Truck Enthusiast

            Ask me a question

            Level 4

            Pros

            • Easy To Install
            • Increases Power
            • Lightweight

            Cons

              Best Uses

              • Everyday Driving

              Comments about Factory Air Blower Motor:

              Great replacement for OEM motor that wore out on my 2001 Excursion 7.3L You will need to wire up the plug, which is very easy to do. You will also need to move your old fan cage to the new motor. Again, easy enough to do.

              Comment on this review(earn points)

               
              4.0

              Easy to install

              By Bigplay_in_GA

              from Dallas, GA

              About Me Casual Driver

              Verified Buyer
              Level 3

              Pros

              • Easy To Install
              • Includes Instructions

              Cons

              • Should Include A Gasket

              Best Uses

              • Replacement

              Comments about Factory Air Blower Motor:

              Replaced the blower motor and blown front resistor when the I lost all but high blower speeds. The new motor was fairly easy to install. I wish it also included a replacement foam gasket.
              The old foam gasket was slightly stretched out of shape. I held it in place on the new motor housing by using a few drops of crazy glue at key points on the new motor. Otherwise, the gasket would have slipped out of place.
              Also, it does not include the fan blades. You must reuse the old blades. Try adding a couple of drops of WD-40 to the old fan blade spindle before trying to remove the blades. The job will go easier.

              Comment on this review(earn points)

              (2 of 2 customers found this review helpful)

               
              5.0

              Perfect fit for my 2001 Villager

              By Michael1003

              from Orlando, Fl

              About Me Casual Driver

              Verified Buyer
              Level 1

              Pros

              • Durable
              • Easy To Install

              Cons

                Best Uses

                • Replacement

                Comments about Factory Air Blower Motor:

                This product was an exact replacement for my 2001 Mercury Villager. It was easy to install. It even came with the replacement clip that hold the blower wheel in place. The plug was also easy to assemble.

                Comment on this review(earn points)

                (0 of 2 customers found this review helpful)

                 
                5.0

                works good

                By cashman

                from lebanon ,tn

                Comments about Factory Air Blower Motor:

                It's a universal blower, had to bend two tabs out of the way with pliers, cut off the factory alignment pegs on blower housing with my pocket knife,simple, and then it blew backwards, so I reversed the wires, and then it was great, for the price, you can't beat it, the motorcraft one is a hundred bucks, sooo, it's your choice, if your handy, no problem if not, better get the motorcraft one

                Comment on this review(earn points)

                (1 of 1 customers found this review helpful)

                 
                5.0

                Perfect replacement

                By boggsy

                from Ravenna, OH

                About Me Auto Enthusiast

                Verified Buyer
                Level 1

                Pros

                • Durable
                • Easy To Install

                Cons

                  Best Uses

                    Comments about Factory Air Blower Motor:

                    This blower was an exact fit. Please note that this blower is bidirectional: you should therefore make sure to plug it in and test it before you install it in the firewall!

                    Comment on this review(earn points)

                    (1 of 1 customers found this review helpful)

                     
                    5.0

                    This Motor Really Blows...;-)

                    By Scott

                    from Salt Rock, WV

                    3 or more reviews submitted

                    Pros

                    • Durable
                    • Easy To Install
                    • Metal not plastic
                    • Perfect Fit

                    Cons

                    • Reversed Polarity

                    Best Uses

                    • Everyday Driving
                    • Heating and AC
                    • Replacement

                    Comments about Factory Air Blower Motor:

                    I purchased this motor to replace one that was failing on my 1999 Mercury Villager. The original motor mounting plate is plastic, where this replacement is all steel. Upon installing the blower, I was informed to check the direction of the motor's rotation before I bolted it in. Sure enough, it was running backwards. I simply reversed the connectors in the plug and it now turns in the right direction. The installation was as easy as the removal, and the new motor is nice and quiet.

                    • Car & Truck:
                    • Auto Enthusiast, Casual Driver

                    Comment on this review(earn points)

                    (0 of 1 customers found this review helpful)

                     
                    5.0

                    Perfect fit

                    By Rick S

                    from Ft Myers,FL

                    Verified Buyer

                    Pros

                    • Durable
                    • Easy To Install

                    Cons

                    • No Improvement In Performance

                    Best Uses

                    • Replacement

                    Comments about Factory Air Blower Motor:

                    Easy Replacement

                    • Car & Truck:
                    • Truck Enthusiast

                    Comment on this review(earn points)

                    Displaying reviews 1-10

                    Back to top

                    Previous | Next »

                    Do you have questions about this product?(earn points for answers!)

                     

                    Ask a question, get answers from real customers and in-house experts. Or contact Customer Care by email or call 1-877-238-2623.

                    1 Question | 1 Answer
                    Displaying question 1
                    • Q:

                      HOW DO I CHANGE A BLOWER MOTOR ON A 2004 FORD F350 KING RANCH 6.0 DIESEL?
                      Asked on 2/13/2011 by Anonymous

                      1 answer

                      • CUSTOMER CARE

                        A:

                        For step by step instructions I recommend that you go to your nearest Advance Auto Parts store and purchase a repair manual.

                        Answered on 2/15/2011 by David the Dynamite Parts Guy from AAP
                    Displaying question 1

                    Do you have a question about this product? 

                    Create or view your online garage

                    Check out the specials in our monthly flyer

                     
                     
                    Disclaimer We strive to keep all information accurate and up-to-date; however, product availability, pricing, promotions and store hours are subject to change without notice. Please contact Customer Care if you have any questions or corrections.