Seat Belt 74-90"
Hover over the image to zoom in
Seat Belt 74-90 Seat Belt 74-90
Share this:

Superior Seat Belt 74-90"

Part No. 46-3250B Warranty Details  

Do you have questions about this product?

 

Ask a question, get answers from real customers and in-house experts. For further assistance, please review your support options on our Contact Us page.

14 Questions | 15 Answers
Displaying questions 1-10Previous | Next »
  • Q:

    HOW TO INSTALL BELT, NEED INSTRUCTIONS.
    Asked on 8/25/2016 by bob from lenoir city, tn

    1 answer

    • CUSTOMER CARE

      A:

      Hi Bob, glad to assist you! Instructions to replace the seat belt. Trace the straps from the original seat belt back to the anchors that attach the belt to the frame of the car. If you are installing seat belts that have a shoulder harness, the shoulder strap from the original belt will terminate in an anchor on the side of the car frame. Lap belts will have an anchor in the bottom of the frame. Lock the crescent wrench on the side of the anchor bolt that is in the car. Either have a helper hold the wrench stationary, or make sure that if the wrench turns, the handle will become blocked against the actual car seat and not be able to continue turning as you work the other end of the bolt free. Locate the bottom of the anchor bolt. For lap belts, you will find it protruding through the bottom of the car. For shoulder belts, you will not be able to access the end of the bolt but can immediately begin to turn the crescent wrench in a counterclockwise direction to unscrew the bolt from the side frame. For lap belts, attach a socket wrench to the nut on the bolt under the car and turn the socket counterclockwise until it is completely off the anchor bolt. Withdraw the bolts from the bolt holes. Remove the old seat belts and anchoring hardware. If you have a retractable seat belt, remove the entire case that contains the spool that held the old belt. Install the new belt by bolting the new spool case in the same position as the old one or, if it is a "straight belt" that does not retract, bolt the anchor plate down. The anchor plate will be one of the two plates included with your replacement belt but the only one with a 45-degree angle to it. Your retractable belt is completely installed at this point. To finish installing a straight belt, there's one more step. Thread the belt through the anchor plate and around the locking plate. The locking plate is the plate that looks similar to a large, flat washer. Pass the belt through the hole in the center once and then loop it over the top of the locking plate and back through the center once more so both plates lock together and the belt does not move when you pull on the belt. Repeat steps four and five to install the other side of the seat belt.

      Answered on 8/26/2016 by Steve from AAP
  • Q:

    will this work for a ford focus 2000 model, the latch doesnt work any longer
    Asked on 4/4/2016 by dawn from United States

    1 answer

    • CUSTOMER CARE

      A:

      I'm happy to help, Dawn! This Superior Seat Belt (Part No. 46-3250B) is universal not vehicle specific. This belt is adjustable from 74 to 90 inch and it is a non-retractable replacement lap seat belt. You would have to match one by size to what is on the vehicle that can be fabricated into its place.

      Answered on 4/5/2016 by Steve from AAP
  • Q:

    Will this work in a 2002 chevrolet tahoe?
    Asked on 3/7/2016 by Shinton37 from Birmingham,AL

    1 answer

    • CUSTOMER CARE

      A:

      I'm happy to help, Shinton37! This Superior Seat Belt - Part No. 46-3250B is not specifically made for a 2002 Chevrolet Tahoe. Slight modifications may be needed to use this product. This is adjustable up to 90 inch and is a non-retractable replacement lap seat belt. You would have to match one by size to what is on the vehicle that can be fabricated into its place.

      Answered on 3/9/2016 by Solomon from AAP
  • Q:

    Do these seat belts come on (RED color)?
    Asked on 3/4/2016 by TC from Easley SC.

    1 answer

    • CUSTOMER CARE

      A:

      I'm glad to assist you, TC! This Superior Seat Belt 74-90" - Part No. 46-3250B is not available in red color online. However, I recommend checking with your local store for availability.

      Answered on 3/6/2016 by Solomon from AAP
  • Q:

    Will the buckle in this belt work with my 2009 Honda Civic LX rear safety belts? I only need the buckles of the three safety belts. The belts are ok but the buckles don´t work. If it doesn´t work, do you sell another buckle that will do for my car?
    Asked on 12/9/2015 by Teresa

    1 answer

    • CUSTOMER CARE

      A:

      Hi Teresa, I'm glad to assist you. This Superior Seat Belt 74-90" (Part No. 46-3250B) is not specifically made for your vehicle. Slight modifications may be needed to use this product. You would have to match one by size to what is on the vehicle that can be fabricated into its place. This is adjustable up to 90 inch and is a non-retractable replacement lap seat belt. The exact rear seat belt buckle for your vehicle is currently unavailable online.

      Answered on 12/10/2015 by Steve from AAP
  • Q:

    will this belt work "as is" to replace the rear center lapbelt in a 2003 Honda Odyssey?
    Asked on 11/26/2014 by jason b. from radford, va

    1 answer

    • CUSTOMER CARE

      A:

      Hi Jason, glad to assist you! This seaat belt is not specifically made for your vehicle. Slight modifications may be needed to use this product. You would have to match one by size to what is on the vehicle that can be fabricated into its place. This is adjustable up to 90 inch and is a non-retractable replacement lap seat belt.

      Answered on 11/26/2014 by Solomon
  • Q:

    will this work with my scion xb 2004?
    Asked on 11/14/2014 by KARIM from United States

    1 answer

    • CUSTOMER CARE

      A:

      Hi Karim, glad to assist you! This product is not specifically made for your vehicle. Modifications may or may not be needed to use this product. This is adjustable up to 90 inch and is a non-retractable replacement lap seat belt. You would have to match one by size to what is on the vehicle that can be fabricated into its place.

      Answered on 11/16/2014 by Solomon
  • Q:

    Does this come as a pair? How many in a pack?
    Asked on 9/28/2014 by Rennie from Lynchburg, Va.

    1 answer

    • CUSTOMER CARE

      A:

      Hi Rennie, I'm glad to assist you! This seat belt is sold individually.

      Answered on 9/28/2014 by Solomon
  • Q:

    Does this belt fit into the seat belt retractor of a 1997 Ford ranger? How does it attatch to the exhisting system?
    Asked on 9/12/2014 by Mike from Disney

    1 answer

    • CUSTOMER CARE

      A:

      Hi Mike, this is a non-retractable 3 point (shoulder & lap) seatbelt and it does not fit your 1997 Ford ranger. The exact seat belt for your vehicle is currently unavailable online.

      Answered on 9/15/2014 by Steve from AAP
  • Q:

    Is this a shoulder/lap belt combination seat belt? Also is it hard to install?
    Asked on 8/18/2014 by Kathy

    1 answer

    • CUSTOMER CARE

      A:

      Hi Kathy, glad to assist you! The part number 46-3250B is a lap belt only. The part number 46-2100B is a non-retractable 3 point (shoulder & lap) seatbelt. I have forwarded the installation instructions to your email address. Currently, this is unavailable online. I would recommend that you check with the nearest Advance store and one of our parts pros will be glad to assist you with an alternate availability.

      Answered on 8/20/2014 by Vincent from AAP
Displaying questions 1-10Previous | Next »

Do you have a question about this product? 

Check out the specials in our monthly flyer.
 
 
Disclaimer We strive to keep all information accurate and up-to-date; however, product availability, pricing, promotions and store hours are subject to change without notice. Please contact Customer Care if you have any questions or corrections.