Brake Caliper with Mounting Bracket
Hover over the image to zoom in
Share this:

Remanufactured Brake Caliper with Mounting Bracket

Part No. SLC632 Warranty  

See if this part fits a specific vehicle.

Check Vehicle Fit

Ready to Install Brake Caliper comes with pre installed mounting bracket along with new critical hardware to reduce installation time up to 40%. In addition limiting brake system noise and vibration issues that can be caused by reusing old components such as worn-out mounting brackets that no longer conforms to manufacture specifications due to wear and rust. All calipers are tested through a multi stage process to ensure leak-free operation and 100% compatibility between all components and the vehicle.

Product Features:
  • Pre Installed Mounting Bracket, reduces installation time by up to 40%
  • Hardware Included
  • 100% Pressure Tested
  • OE Grade Seals
  • Rust Inhibitor Coating
  • Pre-assembled, ready to install
Back To Top
Bracket included:Yes
Caliper Material:Cast Iron
Finish:Blasting + Anti-Rust
Hardware Included:Yes
Location:Front Left, Rear Left, Rear Right
Mounting Hardware Included:No
OE Replacement:Yes
Pads Included:No
Performance:No
Piston Material:Phenolic
Piston Quantity:2

REVIEW SNAPSHOT®

by PowerReviews
RemanufacturedBrake Caliper with Mounting Bracket
 
4.3

(based on 19 reviews)

Ratings Distribution

  • 5 Stars

     

    (12)

  • 4 Stars

     

    (3)

  • 3 Stars

     

    (2)

  • 2 Stars

     

    (2)

  • 1 Stars

     

    (0)

89%

of respondents would recommend this to a friend.

Pros

  • Easy to install (16)
  • Decreased stopping distance (5)
  • No fade (4)

Cons

    Best Uses

    • Everyday driving (13)
    • Replacement (11)
      • Reviewer Profile:
      • Mechanic (8), Casual driver (7), Truck enthusiast (7), Auto enthusiast (5)

    Most Liked Positive Review

     

    does what it was intended to do

    replaced oem caliper with this one,will be replacing the rest in the future,installation was simple and quick,will be useing these when I replace the rest.So far this has been a quality product...Read complete review

    replaced oem caliper with this one,will be replacing the rest in the future,installation was simple and quick,will be useing these when I replace the rest.So far this has been a quality product for the price.

    VS

    Most Liked Negative Review

     

    Poor quality control

    Couldn't get bracket bolts loose for pad replacement. Store rep also tried without any luck. Slid bracket off of pins and you could see that they were never removed, just shot blasted and...Read complete review

    Couldn't get bracket bolts loose for pad replacement. Store rep also tried without any luck. Slid bracket off of pins and you could see that they were never removed, just shot blasted and coated while still on caliper. Caliper didn't even slide well on them. Advance ordered replacement. Also instructions stated to torque fasteners to factory specifications. Inlet hose bolt provided stretched and nearly broke well before reaching torque setting. Replaced with Dorman bolts without any issues.

    Reviewed by 19 customers

    Sort by

    Displaying reviews 1-10

    Back to top

    Previous | Next »

     
    4.0

    Stopping is easy

    By Goof

    from Endicott, NY

    About Me Advanced Dyi, Casual Driver, Truck Enthusiast

    Verified Buyer
    Level 3

    Pros

    • Decreased Stopping Distance
    • Easy To Install
    • No Fade

    Cons

      Best Uses

      • Everyday Driving
      • Replacement

      Comments about Remanufactured Brake Caliper with Mounting Bracket:

      I will never buy a lone naked caliper again. These assemblies come ready to toss in pads and install, no fuss no muss. Just a touch of lube and you're good to go. These include new pins and spacers already lubed and installed making the job easier than ever.

      Comment on this review(earn points)

       
      5.0

      This is a breeze with the bracket!

      By Mark

      from Massachusetts

      About Me Mechanic

      Verified Buyer

      Pros

      • Easy To Install

      Cons

        Best Uses

        • Everyday Driving
        • Replacement

        Comments about Remanufactured Brake Caliper with Mounting Bracket:

        This caliper assembly was very easy to install. Thank goodness this came with the "hex head" caliper pins instead of the T-55 Torx pins. I twisted up 3 high quality Torx bits to complete the job on both the left and right sides. I was very happy to be able to loosen and remove the fourth and last one. Do yourself a favor: Buy the caliper with the bracket and pin assembly just like this one. New slide pin seals, new pins, new bleeder, and even a new banjo bolt w/copper crush washers. Bleed off a little bit of air and you are done!

        Comment on this review(earn points)

        (0 of 3 customers found this review helpful)

         
        5.0

        Works Great, Fit's Like a Glove

        By Julio

        from Skaneateles NY

        About Me Casual Driver, Mechanic, Truck Enthusiast

        Verified Buyer
        Level 1

        Pros

        • Decreased Stopping Distance
        • Easy To Install
        • Lightweight
        • No Fade

        Cons

          Best Uses

          • Everyday Driving
          • Replacement

          Comments about Remanufactured Brake Caliper with Mounting Bracket:

          The best thing about this caliper is it came with replacement bolts with a hex head instead of the original Torx head bolts, the torx bit always breaks off when trying to remove the bolt. The hex head saved me a lot of money because when I last changed the pads I broke 3 $12.00 torx bits before I got it off.

          Comment on this review(earn points)

           
          5.0

          time saver

          By JD cars

          from Jackson Michigan

          3 or more reviews submitted

          Pros

          • Easy To Install

          Cons

            Best Uses

              Comments about Remanufactured Brake Caliper with Mounting Bracket:

              made for ez fast install all new parts new slide bolts

              Comment on this review(earn points)

               
              3.0

              Hardware not new

              By Kurtgun11

              from Olive Branch, MS

              Level 1

              Pros

                Cons

                • Difficult To Install

                Best Uses

                  Comments about Remanufactured Brake Caliper with Mounting Bracket:

                  I was changing pads out on my 2003 Tahoe and found one of the old front calipers TORX bolts were stuck tight. I had to use a 6 foot breaker bar and a C-Clamp to keep socket on, and still no luck. Took off caliper and noted the pins and slides were worn and so I ordered a new pair of remanufactured units. So when I get them, I find one caliper with brand new slider pins with hex heads (Yeah!!!), and the other caliper has someone else's frozen TORX bolts. So I installed that caliper to try to remove them and found I could not, as those TORX bolt heads were wallered out!! What a disappointment...

                  Comment on this review(earn points)

                   
                  3.0

                  Worked as expected

                  By squeezledeeznutz

                  from Minnesota

                  About Me Casual Driver

                  Ask me a question

                  Verified Buyer
                  Level 3

                  Pros

                  • Easy To Install

                  Cons

                    Best Uses

                    • Everyday Driving

                    Comments about Remanufactured Brake Caliper with Mounting Bracket:

                    great replacement option

                    Comment on this review(earn points)

                     
                    5.0

                    Great value

                    By JK

                    from Greene,RI

                    About Me Mechanic

                    Ask me a question

                    Verified Buyer
                    3 or more reviews submitted

                    Pros

                    • Easy To Install

                    Cons

                      Best Uses

                      • Everyday Driving
                      • Replacement

                      Comments about Remanufactured Brake Caliper with Mounting Bracket:

                      Repalcing the caliper with the bracket makes the job a lot easier.On these trucks it is common for the pads to freeze up in the caliper bracket due to rust build up.Installing a new caliper and bracket saves the hassle of removing the rust from the old bracket and having it possibly freeze up again.

                      Comment on this review(earn points)

                       
                      5.0

                      Just as needed.

                      By Chevroletfanforlife

                      from Wausau, WI

                      About Me Auto Enthusiast, Truck Enthusiast

                      Verified Buyer
                      3 or more reviews submitted

                      Pros

                      • Easy To Install

                      Cons

                      • Heavy

                      Best Uses

                      • Everyday Driving

                      Comments about Remanufactured Brake Caliper with Mounting Bracket:

                      The other side of my order for 2 front calipers for my 2004 silverado had no slide pin issues as the other side. This installed easy and works great!

                      I did paint them both black as they were a grey metallic finish.

                      Comment on this review(earn points)

                       
                      5.0

                      Fit great work Great !!!!

                      By Paul

                      from Victor , NY

                      About Me Casual Driver, Mechanic, Truck Enthusiast

                      Verified Buyer
                      Level 2

                      Pros

                      • Decreased Stopping Distance

                      Cons

                        Best Uses

                        • Everyday Driving

                        Comments about Remanufactured Brake Caliper with Mounting Bracket:

                        the parts came COMPLETE easy to install work great

                        Comment on this review(earn points)

                         
                        4.0

                        Exact fit for my Chevy

                        By Silverado with 200k + miles

                        from Central NY

                        About Me Auto Enthusiast, Truck Enthusiast

                        Verified Buyer
                        3 or more reviews submitted

                        Pros

                        • Easy To Install

                        Cons

                          Best Uses

                          • Everyday Driving
                          • Replacement

                          Comments about Remanufactured Brake Caliper with Mounting Bracket:

                          Caliper was an exact fit. But I had to put it in a vice use a breaker bar and heat to get slide pins to back out. I added anti-seize to threads when I reinstalled them.

                          Comment on this review(earn points)

                          Displaying reviews 1-10

                          Back to top

                          Previous | Next »

                          Do you have questions about this product?(earn points for answers!)

                           

                          Ask a question, get answers from real customers and in-house experts. Or contact Customer Care by email or call 1-877-238-2623.

                          4 Questions | 5 Answers
                          Displaying questions 1-4
                          • Q:

                            WHEN YOU BUY THE BRAKE CALIPERS IS THE PRICE GIVEN FOR BOTH SIDES OR JUST ONE SIDE?
                            Asked on 4/3/2014 by T Z from RURALVALLEY,PA.

                            1 answer

                            • CUSTOMER CARE

                              A:

                              Hi T Z! I see that this Brake Caliper with Mounting Bracket is sold individually.

                              Answered on 4/5/2014 by Vincent from AAP
                          • Q:

                            does this caliper work on 4wd models
                            Asked on 11/11/2013 by dsf from traverse city mi

                            1 answer

                            • CUSTOMER CARE

                              A:

                              Hi DSF, this caliper would fit various makes and models. To check the exact fit application, please provide us the year, make, model and engine size of your vehicle.

                              Answered on 11/12/2013 by Steve from AAP
                          • Q:

                            Isn't the SLC632 the front left caliper?
                            Asked on 12/2/2011 by Buck from Brick, NJ

                            1 answer

                            • CUSTOMER CARE

                              A:

                              No, this Fenco Brake Caliper (Part No. SLC632) works for Front left or right in some vehicles and also for Rear left or right in some vehicles. If you could please include the year make and model of the vehicle and we would be better able to assist you.

                              Answered on 12/2/2011 by Dennis from AAP
                          • Q:

                            Is front right the passenger side of the vehicle?
                            Asked on 6/21/2011 by Barry from Centreville, VA

                            2 answers

                            • CUSTOMER CARE

                              A:

                              Yes, Right side is the passenger side.

                              Answered on 6/22/2011 by DIY Daniel from AAP
                            • A:

                              no, you want to use slc633 for the front passenger side

                              Answered on 10/8/2011 by MarkG from Holland, IA
                          Displaying questions 1-4

                          Do you have a question about this product? 

                          Create or view your online garage

                          Check out the specials in our monthly flyer

                           
                           
                          Disclaimer We strive to keep all information accurate and up-to-date; however, product availability, pricing, promotions and store hours are subject to change without notice. Please contact Customer Care if you have any questions or corrections.