Brake Caliper with Mounting Bracket
Hover over the image to zoom in
Share this:

Remanufactured Brake Caliper with Mounting Bracket

Part No. SLC631 Warranty  

See if this part fits a specific vehicle.

Check Vehicle Fit

Ready to Install Brake Caliper comes with pre installed mounting bracket along with new critical hardware to reduce installation time up to 40%. In addition limiting brake system noise and vibration issues that can be caused by reusing old components such as worn-out mounting brackets that no longer conforms to manufacture specifications due to wear and rust. All calipers are tested through a multi stage process to ensure leak-free operation and 100% compatibility between all components and the vehicle.

Product Features:
  • Pre Installed Mounting Bracket, reduces installation time by up to 40%
  • Hardware Included
  • 100% Pressure Tested
  • OE Grade Seals
  • Rust Inhibitor Coating
  • Pre-assembled, ready to install
Back To Top
Bracket included:Yes
Caliper Material:Cast Iron
Finish:Blasting + Anti-Rust
Hardware Included:Yes
Location:Rear Left, Rear Right
Mounting Hardware Included:No
OE Replacement:Yes
Pads Included:No
Performance:No
Piston Material:Steel
Piston Quantity:2

REVIEW SNAPSHOT®

by PowerReviews
RemanufacturedBrake Caliper with Mounting Bracket
 
3.6

(based on 9 reviews)

Ratings Distribution

  • 5 Stars

     

    (4)

  • 4 Stars

     

    (2)

  • 3 Stars

     

    (0)

  • 2 Stars

     

    (1)

  • 1 Stars

     

    (2)

67%

of respondents would recommend this to a friend.

Pros

  • Easy to install (5)

Cons

    Best Uses

    • Replacement (6)
    • Everyday driving (5)
      • Reviewer Profile:
      • Auto enthusiast (3)

    Reviewed by 9 customers

    Sort by

    Displaying reviews 1-9

    Back to top

     
    1.0

    Binding after 8 months and 4K miles

    By Ray2285

    from 8731

    About Me Shop owner

    Pros

      Cons

      • Failed Too Soon

      Best Uses

        Comments about Remanufactured Brake Caliper with Mounting Bracket:

        Caliper Pistons bind when caliper gets hot and drag pads.
        Had to replace it for free on a customers truck due to defect. Customer not Happy with Me I'm Not happy with the Part. Will use Manufacturer OEM from Now ON. Not worth doing it twice

        Comment on this review(earn points)

        (13 of 24 customers found this review helpful)

         
        5.0

        Ford Castings - Need I say more

        By Chuck

        from Washington DC

        About Me Auto Enthusiast

        Verified Buyer
        Level 3

        Pros

        • Decreased Stopping Distance
        • Easy To Install

        Cons

          Best Uses

          • Everyday Driving
          • Replacement

          Comments about Remanufactured Brake Caliper with Mounting Bracket:

          The replacement caliper dropped right in and includes new clips and brake line connection washers. Installed in minutes. The calipers were Ford casted and are performing excellent since replacement. They fit perfectly on my 2001 Ford Excursion V10 4x4.

          Comment on this review(earn points)

          (12 of 25 customers found this review helpful)

           
          4.0

          looks brand new to me

          By JonnyL

          from Michigan

          About Me Mechanic

          3 or more reviews submitted

          Pros

          • Easy To Install
          • Fits Great

          Cons

          • Had To Look Over

          Best Uses

          • Everyday Driving
          • Replacement

          Comments about Remanufactured Brake Caliper with Mounting Bracket:

          Fit great on my early 99 super duty which uses the same caliper on both sides. Came with everything but the caliper bracket mounting bolts, so be sure yours come out and are reusable. Only negative thing was caliper slide pins that come pre assembled hardly had any brake grease applied. So I just added some synthetic brake grease so they don't seize up later on.

          Comment on this review(earn points)

          (12 of 23 customers found this review helpful)

           
          4.0

          nice part

          By Scott

          from CT

          About Me Auto Enthusiast, Truck Enthusiast

          Verified Buyer
          Level 2

          Pros

            Cons

            • Already Rusting

            Best Uses

            • Everyday Driving

            Comments about Remanufactured Brake Caliper with Mounting Bracket:

            Rust Inhibitor Coating is a joke. If you want them to look good for a long time paint with caliper paint.

            Comment on this review(earn points)

            (14 of 23 customers found this review helpful)

             
            2.0

            not impressed low quality control

            By pfpsteve

            from michigan

            About Me Auto Enthusiast

            Verified Buyer
            Level 2

            Pros

              Cons

              • No Qc Control

              Best Uses

              • Replacement

              Comments about Remanufactured Brake Caliper with Mounting Bracket:

              Poor quality
              Brake line atachment ( threaded potrt) threads were dammaged NO it was not the bolt.
              Returned to store the same problem (s) had to select the least dammaged one
              Not the part to have to re tap thereds on.

              Comment on this review(earn points)

              (14 of 27 customers found this review helpful)

               
              5.0

              exact fit with all accessories

              By Barrell

              from Pittsfield, MASS

              About Me Mechanic

              Verified Buyer
              Helpful Reviewer

              Pros

              • Easy bolt on
              • Easy To Install

              Cons

                Best Uses

                • Everyday Driving
                • Replacement

                Comments about Remanufactured Brake Caliper with Mounting Bracket:

                these part came with everything you need to replace the caliper and install the new brakes

                Comment on this review(earn points)

                (13 of 30 customers found this review helpful)

                 
                1.0

                go away

                By adam park

                from lima ohio

                Verified Buyer
                Helpful Reviewer

                Comments about Remanufactured Brake Caliper with Mounting Bracket:

                just sell product

                Comment on this review(earn points)

                (17 of 30 customers found this review helpful)

                 
                5.0

                Rebuilt caliper just like new

                By sidevinder

                from Gonic, NH

                Verified Buyer
                Level 3

                Pros

                • Easy To Install

                Cons

                  Best Uses

                  • Everyday Driving
                  • Replacement

                  Comments about Remanufactured Brake Caliper with Mounting Bracket:

                  Includes new caliper anti-rattle/pad guide clips, brake hose washers (does not include banjo bolt - resuse existing banjo bolt). Also includes new greased caliper slide bolts & boots (installed) and rebuilt mounting bracket. Does not include bolts to mount mounting bracket to vehicle (reuse existing bolts). Fits well, looks like new and works like new. Brake pads were a little tight on one caliper (with new anti-rattle clips installed). Easiest way to install is to LIGHTLY pinch rubber flexible brake line near caliper with vice grips to keep fluid from coming out when disconnecting brake hose from the old caliper and then bolt the brake line to the new caliper with new copper crush washers. Do not forget to install new anti-rattle clips. It is easier to install the anti-rattle clips then the brake pads into the caliper mounting bracket with the caliper removed from the caliper mounting bracket. Remember to put some anti-squeal on the back of the brake pads before installing into the caliper mounting bracket.

                  • Car & Truck:
                  • Mechanic, Truck Enthusiast

                  Comment on this review(earn points)

                  (15 of 29 customers found this review helpful)

                   
                  5.0

                  I Would buy this product again and again

                  Pros

                  • Easy To Install

                  Cons

                    Best Uses

                    • Replacement

                    Comments about Remanufactured Brake Caliper with Mounting Bracket:

                    Easy to install and works great.

                    • Car & Truck:
                    • Truck Enthusiast

                    Comment on this review(earn points)

                    Displaying reviews 1-9

                    Back to top

                    Do you have questions about this product?(earn points for answers!)

                     

                    Ask a question, get answers from real customers and in-house experts. Or contact Customer Care by email or call 1-877-238-2623.

                    2 Questions | 2 Answers
                    Displaying questions 1-2
                    • Q:

                      I need both rear calipers for 1999 F250 Ford Super Duty,Ext.Cab, 4x4,7.3 Diesel, Manufacture date of 2/99. are the calipers side specific? Could you give me the part numbers for both calipers?
                      Asked on 1/16/2012 by Anonymous

                      1 answer

                      • CUSTOMER CARE

                        A:

                        The Re-manufactured Rear Brake Caliper (Part Number : SLC631) will work for both the rear driver side and rear passenger side of your 1999 Ford F250 Super Duty.

                        Answered on 1/17/2012 by DIY Daniel from AAP
                    • Q:

                      I need to replace the rear break calipers on a 2001 ford F-250pickup,5.4 liter v8.

                      For the fenco break calipers; are there a right and left side rear calipers, if so what are the part numbers for these?
                      Asked on 8/30/2011 by scott from wakeman ohio

                      1 answer

                      • CUSTOMER CARE

                        A:

                        Fenco Brake Caliper with Part No. C630 is for rear left and Fenco Brake Caliper with part No. SLC631 is for rear right.

                        Answered on 8/31/2011 by Vincent from AAP
                    Displaying questions 1-2

                    Do you have a question about this product? 

                    Create or view your online garage

                    Check out the specials in our monthly flyer

                     
                     
                    Disclaimer We strive to keep all information accurate and up-to-date; however, product availability, pricing, promotions and store hours are subject to change without notice. Please contact Customer Care if you have any questions or corrections.