Wheel Bearing Kit, 1"
Hover over the image to zoom in
Share this:

Reese Wheel Bearing Kit, 1"

Part No. 72791 Warranty  
REESE Towpower wheel bearing kit consists of two bearing protectors and two covers. It is designed to provide resistance against water and dirt, and permit easy lubrication for longer life.
Back To Top
ABS Brakes:No
Bearing Type:Tapered Roller
Cone Inside Diameter:1 in
Cone Outside Diameter:1.35 in
Inside Diameter:1 in
Material:Steel
OE Number(s):L44643/L44610
Outside Diameter:1.98 in
Race Included:Yes
Race Inside Diameter:1.64 in
Race Outside Diameter:1.98 in
Race Width:0.42 in
Races Included:Yes
Sealed:No
Spline:No
Teeth Tone:No
Type:Wheel Bearing
Width:0.579 in

REVIEW SNAPSHOT®

by PowerReviews
ReeseWheel Bearing Kit, 1 In.
 
4.0

(based on 1 review)

Ratings Distribution

  • 5 Stars

     

    (0)

  • 4 Stars

     

    (1)

  • 3 Stars

     

    (0)

  • 2 Stars

     

    (0)

  • 1 Stars

     

    (0)

Reviewed by 1 customer

Displaying review 1

Back to top

(22 of 44 customers found this review helpful)

 
4.0

Keep on rolling....

By The Librarian

from McAllen, TX

About Me Casual Driver

Verified Buyer
Level 2

Pros

  • Improves Performance

Cons

    Best Uses

    • Car

    Comments about Reese Wheel Bearing Kit, 1 In.:

    Product was easy to install and fixed my bearing problem.

    Comment on this review(earn points)

    Do you have questions about this product?(earn points for answers!)

     

    Ask a question, get answers from real customers and in-house experts. Or contact Customer Care by email or call 1-877-238-2623.

    16 Questions | 19 Answers
    Displaying questions 1-10Previous | Next »
    • Q:

      Does this kit include: 2 bearings (L44643); 2 bearing races (L44610), and one seal?
      Asked on 9/26/2013 by Frank

      1 answer

      • CUSTOMER CARE

        A:

        Hi Frank, this Reese Wheel Bearing Kit, 1 In. - Part No. 72791 contains two bearings, two races, one seal and one cotter pin. For any further assistance please feel free to call us at: 1-877-238-2623 or visit the nearest Advance Auto Parts store and one of our Parts Pros will gladly assist you with any questions or concerns you may have.

        Answered on 9/26/2013 by Morgan from AAP
    • Q:

      Who is the manufacturer of this bearing?
      Asked on 7/16/2013 by Paul from Michigan

      1 answer

      • CUSTOMER CARE

        A:

        For any further assistance regarding the Reese Wheel Bearing Kit, 1 In. (Part No. 72791), please feel free to call us at: 1-877-238-2623 or visit the nearest Advance Auto Parts store and one of our Parts Pros will gladly assist you with any questions or concerns you may have.

        Answered on 7/16/2013 by Steve from AAP
    • Q:

      WHAT IS THE SEAL O.D. AND I.D.
      Asked on 7/3/2013 by flat top from altoona,ia

      2 answers

      • A:

        seal ID is usable for 1.220" to 1.249" (1-1/4" nominal) shaft (measures around 1.20 on the seal) and OD is 1.983" for 1.979" bore
        seal # would be Dichtomatik/TCM # 12192TB. or you could use a 12165 CR# seal (which is somewhat wider, at .475")

        Answered on 7/9/2013 by angleturner from central MD
      • CUSTOMER CARE

        A:

        For any further assistance regarding the Reese Wheel Bearing Kit, 1 In. (Part No. 72791), please feel free to call us at: 1-877-238-2623 or visit the nearest Advance Auto Parts store and one of our Parts Pros will gladly assist you with any questions or concerns you may have.

        Answered on 7/3/2013 by Steve from AAP
    • Q:

      will this work for a 91 toyota tercel
      Asked on 12/8/2012 by johnsoncl24 from maple valley wa

      1 answer

      • CUSTOMER CARE

        A:

        Sorry, this Reese Wheel Bearing Kit 1" -(Part No. 72791) is only for trailers. For further assistance, please feel free to call us at 1-877-238-2623 or visit your nearest Advance Auto Parts store and one of our representatives would be more than happy to assist you.

        Answered on 12/9/2012 by Aaron from AAP
    • Q:

      will this kit fit a 2003 Mazda protege (Rear, Drum Brakes)?
      Asked on 2/17/2011 by lilduce41 from St. Joe, IL.

      1 answer

      • CUSTOMER CARE

        A:

        No. These are wheel bearings for trailers.

        Answered on 2/18/2011 by David the Dynamite Parts Guy from AAP
    • Q:

      Will this fit a 1997 Ford Taurus GL? I need to replace my drivers side front bearings, as it wobbles side to side a little bit if I exert pressure on it while I have it on a jack.
      Asked on 1/2/2011 by Val from Moncks Corner, SC

      3 answers

      • CUSTOMER CARE

        A:

        No. These are wheel bearings for trailers. You need either part number #513100 or #NT513100

        Answered on 1/3/2011 by Mike the Auto Parts Master from AAP
      • A:

        if it has "play" side to side, the inner/outter tie rod is faulty. An up/down "play" would be the wheel bearing. Hope you didn't replace something you did not need....

        Answered on 2/23/2011 by Witty the mech. from Granville,NY
      • A:

        if the "play" is side to side,the tie rods are at fault. Up & down play/wobble is the wheel bearing. Hope you didn't waste time & $ on a part you did not need...

        Answered on 2/23/2011 by Witty the mech-tech from Granville,NY
    • Q:

      I need to get bearings for my 2006 Chevy Cobalt LS and these are the ones that came up. I need to know what bearings I am going to need to replace. Its an automatic and I dont know which ones Im going to need
      Asked on 12/15/2010 by Stewie from Fort Campbell, KY

      1 answer

      • CUSTOMER CARE

        A:

        These are wheel bearings for trailers. Are you needing a wheel bearing for the front or rear? Does your vehicle have ABS?

        Answered on 12/16/2010 by Mike the Auto Parts Master from AAP
    • Q:

      will these bearings fit a 2006 lexus gs 600 awd
      Asked on 11/17/2010 by liz from alex., va

      1 answer

      • CUSTOMER CARE

        A:

        No. These are wheel bearings for trailers.

        Answered on 11/18/2010 by Mike the Auto Parts Master from AAP
    • Q:

      do these wheel bearings for a 2007 chevy hhr have to be pressed in or are they easy to install?
      Asked on 11/8/2010 by ant dog from Omaha ne

      1 answer

      • CUSTOMER CARE

        A:

        For help with your project, I recommend getting a repair manual specifically for your vehicle. It should be able to help you with detailed instructions on how to do many things.

        Answered on 11/9/2010 by Mike the Auto Parts Master from AAP
    • Q:

      which rear bearing kit do i need for a 79 cj5 jeep?
      Asked on 11/2/2010 by just me from wellington,ky

      1 answer

      • CUSTOMER CARE

        A:

        Im showing part #A-5 or SA-5

        Answered on 11/3/2010 by Mike the Auto Parts Master from AAP
    Displaying questions 1-10Previous | Next »

    Do you have a question about this product? 

    Create or view your online garage

    Check out the specials in our monthly flyer

     
     
    Disclaimer We strive to keep all information accurate and up-to-date; however, product availability, pricing, promotions and store hours are subject to change without notice. Please contact Customer Care if you have any questions or corrections.