-
Your Store:
-
CARQUEST is now part of the Advance Auto Parts family
CARQUEST and Advance Auto Parts have joined forces to bring you an even better shopping experience. CARQUEST customers can now take advantage of all Advance online promotions, plus enjoy the convenience of ordering online and picking up at their nearest CARQUEST store, or shipping to home.
Permatex PermaPoxy 5 Minute Plastic Weld (.84 oz)
A structural adhesive designed for general purpose bonding of a wide variety of materials. Forms a tough, durable bond to most plastics, composites, ceramics and wood in any combination. Fast-curing product with gelling of mixed adhesive in 5 - 6 minutes and fixturing in 9 - 10 minutes. Will not bond most polyethylene or polypropylene plastics. Bonds hard and soft plastics to specified surfaces. Requires no primers and sets in 5 minutes at room temperature. Cream appearance. Gap filling to 0.125". Water resistant and good chemical resistance. Permanent strength up to 3500 PSI.
Back To Top
| Size (oz.): | 0.84 |
| Container Type: | Dual Syringe |
REVIEW SNAPSHOT®
by PowerReviewsPermatexPermaPoxy 5 Minute Plastic Weld (.84 oz)
(based on 1 review)
Ratings Distribution
REVIEWS
Reviewed by 1 customer
Displaying review 1
Pros
- Great Bonding Of Abs Pc
- Great Bonds-abs Pc
- Great Bonds To Abs Pc
- Great With Ppepa66
- Reliable
Cons
- Difficult To Use
- Flawed Syringe Delivery
- No Bond To Polyethylene
- Only 3 Min Work Time
Best Uses
- Automotive Repair Shop
- Plastic Body Panel Cracks
- Small Size Plastic Repair
Comments about Permatex PermaPoxy 5 Minute Plastic Weld (.84 oz):
This product is a great resource for the bonding of many types of plastic, but not PE, Teflon and some "oily" nylons. The bond that it produces is superior to epoxy/plastic bonds. This is a Methacrylate bonding system. It's formulated for 5 minute working time, but doesn't last 5 mins, only 3 minutes. Also, the applicator's sliding resistance is such that it makes it nearly impossible to regulate precise amounts to dispense, so waste happens (out of only 0.85 oz available). Tips - roughen both surfaces with 180 grit, clean/wipe thourghly with soap and water and rinse and dry well. Apply sparingly to BOTH surfaces and join. Utilize painters tape to clamp together. Warm or hot areas (140F ovens) will accelerate cure time.
Displaying review 1
Do you have questions about this product?(earn points for answers!)
Ask a question, get answers from real customers and in-house experts. Or contact Customer Care by email or call 1-877-238-2623.
6 Questions | 6 Answers
Displaying questions 1-6
Q:
Can this be used to attach the sache clips to glass for car windows?Asked on 8/29/2015 by Chris from Chesapeake VA1 answer
CUSTOMER CARE
A:
Hi Chris, happy to help you! The Permatex PermaPoxy 5 Minute Plastic Weld (.84 oz) (Part No. 84115) forms a tough, durable bond to most plastics, composites, ceramics and wood in any combination. Suggested Applications: Bonds rigid materials including ABS, acrylic, fiberglass, FRP, glass, PVC, SMC, steel, styrene, vinyl, and wood. Use for interior trim, fills cracks, bonds most plastic, bonds plastic to vinyl.Answered on 8/31/2015 by Steve from AAP
Q:
Can I stop leaking on my recovery tank for radiator?Asked on 7/17/2013 by Dick1 answer
CUSTOMER CARE
A:
This Permatex PermaPoxy 5 Minute Plastic Weld (.84 oz) - part# 84115 may help. However, I would always recommend fixing the problem by finding out exactly the cause of leak and then replacing the necessary parts in order to avoid intermittence. For any further assistance, please feel free to call us at: 1-877-238-2623 or visit the nearest Advance Auto Parts store and one of our Parts Pros will gladly assist you with any questions or concerns you may have.Answered on 7/17/2013 by Vincent from AAP
Q:
will this product fix a hairline crack in a plastic radiator.Asked on 5/7/2013 by tom from sc1 answer
CUSTOMER CARE
A:
This Permatex PermaPoxy 5 Minute Plastic Weld (.84 oz) - Part No. 84115 is fix the gap filling upto 0.125 inches on plastics. For any further assistance please feel free to call us at: 1-877-238-2623 or visit the nearest Advance Auto Parts store and one of our Parts Pros will gladly assist you with any questions or concerns you may have.Answered on 5/7/2013 by Morgan from AAP
Q:
Hi! I have a small maybe 1-2 cm long crack and the coolant is leaking like a tear (very small tiny drops) on top of a plastic 1999 Corolla radiator. I would like to use this product. Will this do the job?Asked on 2/6/2013 by Rhony from Arcadia, CA1 answer
CUSTOMER CARE
A:
This part Permatex PermaPoxy™ 5 Minute Plastic Weld, Part No. 84115 is a structural adhesive designed for general purpose bonding of a wide variety of materials. PermaPoxy Plastic Weld form a tough, durable bond to most plastics, composites, ceramics, wood in any combination. PermaPoxy Plastic Weld is a fast curing product with gelling of mixed adhesive in 5 – 6 minutes and fixturing in 9 – 10 minutes. NOTE: PermaPoxy Plastic Weld will not bond most polyethylene or polypropylene plastics. PRODUCT BENEFITS: • Sets in 5 minutes, • Requires no primers, • Room temperature cure, • Gap filling to 0.125 inch, • Bonds diverse substrates, • Water resistant, • Good chemical resistance., TYPICAL APPLICATIONS: To bond rigid materials including: • ABS, • Acrylic, • Fiberglass, • Glass, • PVC, • Styrene, • Vinyl, • Wood, • FRP, • SMC., DIRECTIONS FOR USE: 1. Protect work area from accidental spills., 2. Surface must be clean, dry and free of grease & oil., 3. Roughen surfaces with sandpaper or other abrasives., 4. Use a sharp blade to cut off the tips of both nozzles., 5. Depress plunger on syringe to dispense Part A and Part B. Thoroughly mix on a clean discardable surface for at least one (1) minute or until uniform in color., 6. Apply to surfaces being repaired. Assemble parts immediately. Remove excess epoxy immediately., 7. Allow bond to set for 9 – 10 minutes before moving., FOR CLEAN-UP: 1. For any clean-up, use isopropyl alcohol before the material is allowed to dry., 2. Clean hands with Permatex Fast Orange hand cleaner or soap and water.
For any further assistance please feel free to call us at: 1-877-238-2623 or visit the nearest Advance Auto Parts store and one of our Parts Pros will gladly assist you with any questions or concerns you may have.Answered on 2/7/2013 by Aaron from AAP
Q:
I have a piece of a fender extension on my 89 mustang that had a bolt pull through it basically. Its made of fiberglass. My question is can I use this to basically close up the hole (about the size of a quarter) and around the area cause the fiberglass has a few cracks,then sand it smooth on both sides to the surface and drill a new hole for the bolt to go through? Will it be strong enough to hold to something being bolted to it?Asked on 12/12/2010 by mustangman from florida1 answer
CUSTOMER CARE
A:
This may work for you but there is no guarantee.Answered on 12/13/2010 by Mike the Auto Parts Master from AAP
Q:
if using to fill a small hole in a tail light...what type of tape to use to help support itAsked on 11/10/2010 by nemo from virginia beach, va1 answer
CUSTOMER CARE
A:
I would just a light weight tape that won't stick too much.Answered on 11/10/2010 by Mike the Auto Parts Master from AAP
Displaying questions 1-6
Disclaimer
We strive to keep all information accurate and up-to-date; however, product availability, pricing, promotions and store hours are subject to change without notice. Please contact
Customer Care
if you have any questions or corrections.