-
Your Store:
-
CARQUEST is now part of the Advance Auto Parts family
CARQUEST and Advance Auto Parts have joined forces to bring you an even better shopping experience. CARQUEST customers can now take advantage of all Advance online promotions, plus enjoy the convenience of ordering online and picking up at their nearest CARQUEST store, or shipping to home.
Please Note: This item is not eligible for further promotional discounts, coupons or special offers.
Otto Zimmermann Brake Disc
See if this part fits a specific vehicle.
The Zimmermann Coat-Z brake disc provides a protective coating that prevents rust and corrosion, extended rotor life and improved visual appearance.
To improve the rust protection during storage and usage, Otto Zimmermann GmbH implements this new Coat-Z technology step by step in its production range. Beside the still optimum function of the brake disc, this coating ensures a consistent attractive appearance.
Zimmermann brake discs are usually made of cast iron (with flake graphite) of different qualities; they correspond to the material used for the original spare parts. Therefore, the utilization of such materials (referred to as "High Carbon by the competition) has always been a matter of course for Otto Zimmermann.
Based on the latest developments in the casting technology, the cooling process after moulding is controlled in such a way that the tension relief is already guaranteed from the foundry on. The cost-intensive glowing of the raw or semi-finished parts (slow heating to the annealing temperature, maintaining this temperature for several hours and then slowly re-cooling) can therefore be omitted nowadays.
The following run-in notices are recommended to ensure a safe and proper operation of the brake disc / brake pad system: Violent or shock-braking should be avoided during the first 300 km of travel after the change of the brake discs.
Through a moderate run-in, a gradual warming of the brake disc is performed without creating a heat shock and the friction surfaces of brake disc and brake pad are aligned to each other.
Perform at least 30 brake applications from a medium velocity (approx. 100 km/h) with a moderate deceleration (maximum braking time 3 seconds) down to a velocity of initially 50 km/h, and after about half of the braking cycles were performed down to 25 km/h. Hereby letting the brake disc cool down for approx. 3 min. between the brake cycles through the motion airflow.
Zimmermann GmbH is a global leader in vehicle brake technologies and is an original equipment manufacturer of high quality brake discs and components. Zimmermann products are engineered to OE specifications and are inertia-dynamometer tested to guarantee superior quality.
320x30mm Vented
Product Features:
Back To Top
To improve the rust protection during storage and usage, Otto Zimmermann GmbH implements this new Coat-Z technology step by step in its production range. Beside the still optimum function of the brake disc, this coating ensures a consistent attractive appearance.
Zimmermann brake discs are usually made of cast iron (with flake graphite) of different qualities; they correspond to the material used for the original spare parts. Therefore, the utilization of such materials (referred to as "High Carbon by the competition) has always been a matter of course for Otto Zimmermann.
Based on the latest developments in the casting technology, the cooling process after moulding is controlled in such a way that the tension relief is already guaranteed from the foundry on. The cost-intensive glowing of the raw or semi-finished parts (slow heating to the annealing temperature, maintaining this temperature for several hours and then slowly re-cooling) can therefore be omitted nowadays.
The following run-in notices are recommended to ensure a safe and proper operation of the brake disc / brake pad system: Violent or shock-braking should be avoided during the first 300 km of travel after the change of the brake discs.
Through a moderate run-in, a gradual warming of the brake disc is performed without creating a heat shock and the friction surfaces of brake disc and brake pad are aligned to each other.
Perform at least 30 brake applications from a medium velocity (approx. 100 km/h) with a moderate deceleration (maximum braking time 3 seconds) down to a velocity of initially 50 km/h, and after about half of the braking cycles were performed down to 25 km/h. Hereby letting the brake disc cool down for approx. 3 min. between the brake cycles through the motion airflow.
Zimmermann GmbH is a global leader in vehicle brake technologies and is an original equipment manufacturer of high quality brake discs and components. Zimmermann products are engineered to OE specifications and are inertia-dynamometer tested to guarantee superior quality.
320x30mm Vented
Product Features:
- OE-Equivalent and Direct fit Application.
- High carbon content disc.
- Coat-Z protective anti-corrosion coating
- No formation of rust at the hub and herewith improved visual appearance
- Immediate functional capability without removal of the coating before mounting
- German production meeting the requirements of actual Quality Management Systems
- Well known, highest Otto-Zimmermann-Product-Quality
Disclaimer
We strive to keep all information accurate and up-to-date; however, product availability, pricing, promotions and store hours are subject to change without notice. Please contact
Customer Care
if you have any questions or corrections.