• Home
  •  
  •  
  • Needa Parts Door Hinge Pin and Bushing Kit - 1 Pin, 2 Bushings and 1 Clip
 

Door Hinge Pin and Bushing Kit - 1 Pin, 2 Bushings and 1 Clip
Hover over the image to zoom in
Share this:

Needa Parts Door Hinge Pin and Bushing Kit - 1 Pin, 2 Bushings and 1 Clip

Part No. 38410 Warranty Details  

See if this part fits a specific vehicle.

Check Vehicle Fit

Needa Parts, a division of the Hillman Group, offers a full line of door hinge pins, bushings, and complete kits to restore your vehicle's door to working order. Replacing worn out hinge pins can return a car's door to proper alignment and help save time and money.

Product Features:
  • Kits include all necessary hardware for a complete repair. Pins and bushings are also sold separately.
  • Meets or exceeds OEM standards
Back To Top

Do you have questions about this product?(earn points for answers!)

 

Ask a question, get answers from real customers and in-house experts. Or contact Customer Care by email or call 1-877-238-2623.

9 Questions | 12 Answers
Displaying questions 1-9

  • Q:

    will this kit fit top and botton hinge on 1992 fordf150
    Asked on 1/9/2014 by Raymond from Rocky Point nc

    1 answer

    • CUSTOMER CARE

      A:

      Hi Raymond! Good question. This will fit on upper and lower door hinges for both front and rear doors.

      Answered on 1/12/2014 by Morgan from AAP

  • Q:

    It's this kit compatible with 1997 Executive Lincoln Town Car?
    Asked on 12/13/2012 by Skip

    1 answer

    • CUSTOMER CARE

      A:

      This Dorman - Help Door Hinge Pin and Bushing Kit - 1 Pin, 2 Bushings and 1 Clip (Part No. 38410) does not fit 1997 Lincoln Town Car Executive. For further assistance, please feel free to call us at 1-877-238-2623 or visit your nearest Advance Auto Parts store and one of our representatives would be more than happy to assist you.

      Answered on 12/14/2012 by Steve from AAP

  • Q:

    Does this kit fit upper and lower hinges
    Asked on 8/23/2012 by Charlie from Roanoke, VA

    1 answer

    • CUSTOMER CARE

      A:

      To help you in a better manner, if you could please include the year, make, model and engine specification of the vehicle and we would be better able to assist you.

      Answered on 8/24/2012 by Aaron from AAP

  • Q:

    i got the new pin in but the bushings dont fit in the hole what do i do
    Asked on 11/20/2011 by Anonymous

    2 answers

    • CUSTOMER CARE

      A:

      I would suggest taking your vehicle to a certified mechanic for a proper diagnosis before buying and having parts installed that may not (solve/be) the problem.

      Answered on 11/22/2011 by Steve from AAP

    • A:

      Use a bolt that will fit thru the bushing, a nut, and two washers. Press the bushing into the hole as far as possible, put one washer on each side of the bushing and then screw the nut onto the bolt. Tighten the bolt and nut with two wrenches to press the bushing into the hole. Remove the bolt, nut and washers. Some final taps with a hammer may be needed to fully seat the bushing into the hole. Install the bushings oriented in the same direction (top down or bottom up) as the originals.

      Answered on 8/13/2014 by Dan from Northern, Wisconsin, USA

  • Q:

    do these pins work for a 97 F-350 crew cab? My pins are flared and would have to be cut out. Is this what I need to do?
    Asked on 10/18/2011 by Thomas from Dauglasville, Ga.

    2 answers

    • CUSTOMER CARE

      A:

      Yes, this part fits your 1997 Ford F-350 crew cab.

      Answered on 10/19/2011 by Aaron from AAP

    • A:

      These will work for the front doors, but not the back.The stock hinge pins will have to be drilled for removal.

      Answered on 5/20/2015 by Mike from Abingdon, Va

  • Q:

    Does the hinge need to be drilled for installation of this pin &
    bushing kit?
    Asked on 5/10/2011 by Johnny from Pensacola, FL

    2 answers

    • CUSTOMER CARE

      A:

      Drilling is not required to install. Sharp Hammer taps would do. Heavy blow could bend the hinge legs.

      Answered on 7/8/2011 by DIY Daniel from AAP

    • CUSTOMER CARE

      A:

      Since the Door Hinge Pin and Bushing Kit is Stock replcement part for your vehilce there will be not drilling requried.

      Answered on 7/11/2011 by Anonymous

  • Q:

    where can i get installation instructions for the kit? Does the hinge have to be drilled to accect the bushing?
    Asked on 7/14/2010 by Anonymous

    1 answer

    • CUSTOMER CARE

      A:

      For step by step instructions i recommend that you go to your nearest Advance Auto Parts store and purchase a repair manual.

      Answered on 7/14/2010 by Kevin from AAP

  • Q:

    Hi I wanted to know if this Hinge Pin is compatible with 2002 Ford Explorer Sport ?

    Thanks
    Asked on 3/21/2010 by TAZ from Lutz, FL

    1 answer

    • CUSTOMER CARE

      A:

      Our website states that it is not compatible with your 2002 Ford Explorer Sport.

      Answered on 3/23/2010 by kevin from AAP

  • Q:

    does this item come with only one or ther two required for each door?
    Asked on 3/15/2010 by ben from wolcott ct

    1 answer

    • CUSTOMER CARE

      A:

      This item comes with only one pin.

      Answered on 3/17/2010 by kevin from AAP
Displaying questions 1-9

Do you have a question about this product? 

Create or view your online garage

Check out the specials in our monthly flyer

 
 
Disclaimer We strive to keep all information accurate and up-to-date; however, product availability, pricing, promotions and store hours are subject to change without notice. Please contact Customer Care if you have any questions or corrections.