Ball Bearing
Hover over the image to zoom in
Share this:

National Ball Bearing

Part No. 206 Warranty  

See if this part fits a specific vehicle.

Check Vehicle Fit

Designed to provide enhanced endurance and maximum contamination exclusion while ensuring proper fit, form and function.
Back To Top
Bearing Type:Radial Ball Bearings
Inner Diameter:1.1811 in
Outer Diameter:2.4409 in
Width:0.6299 in

Do you have questions about this product?(earn points for answers!)

 

Ask a question, get answers from real customers and in-house experts. Or contact Customer Care by email or call 1-877-238-2623.

30 Questions | 33 Answers
Displaying questions 1-10Previous | Next »
  • Q:

    Is this the part I need to replace halfway down my drive shaft. the entire drive shaft wobbles around and is making some terrible noise and i cant drive my truck due to safety concerns.
    Asked on 3/14/2014 by Blake from Williamsburg, KY

    1 answer

    • CUSTOMER CARE

      A:

      Hi Blake, tricky question! Yes, replacing the bearing may solve the drive shaft wobble on your truck. However, the answer to this is perhaps more complicated than you think. This may need a mechanic's expertise to determine. I would suggest taking your vehicle to a certified mechanic for a proper diagnosis before buying and having parts installed that may not (solve/be) the problem.

      Answered on 3/16/2014 by Vincent from AAP
  • Q:

    My 2000 Chevy Blazer is making a sort of wobble noise but not vibration coming from the front end. Is this a bearing issue? I just put new tires and new shock absorbers and I want to be sure that I my vehicle is running in tip top shape.
    Asked on 8/22/2013 by Gumby

    1 answer

    • CUSTOMER CARE

      A:

      With reference to your inquiry on the National Ball Bearing -part# 206, the problem may be with the bearing on your Chevy Blazer. However, without the presence of the vehicle we could neither diagnose the problem nor provide you with a 100% answer. I would suggest you to get assistance from a certified mechanic for a proper diagnosis before buying and having parts installed that may not (solve/be) the problem. For any further assistance, you may also call us at: 1-877-238-2623 or visit the nearest Advance Auto Parts store and one of our Parts Pros will gladly assist you with any questions or concerns you may have.

      Answered on 8/23/2013 by Vincent from AAP
  • Q:

    How many bearings need to be replaced in a 2005 Chrysler crossfire srt6. This part is listed as an outer bearing. Thanks
    Asked on 1/8/2013 by TP'SFURY from denver, CO

    1 answer

    • CUSTOMER CARE

      A:

      Only one axle shaft bearing is required for one hub assembly on your 2005 Chrysler Crossfire SRT6 and this National Ball Bearing (Part No. 206) fits your 2005 Chrysler Crossfire SRT6. For further assistance, please feel free to call us at 1-877-238-2623 or visit your nearest Advance Auto Parts store and one of our representatives would be more than happy to assist you.

      Answered on 1/9/2013 by Steve from AAP
  • Q:

    I got new tires on My 2003 Mercury Mountineer, 8 cyl. I was told my front right wheel bearing is very bad. Is the the part I need to replace? and just one?
    Asked on 12/27/2012 by Need Answers from NH

    1 answer

    • CUSTOMER CARE

      A:

      Yes, you will need only one ball bearing for replacing the front right wheel bearing on your 2003 Mercury Mountaineer and this part is an exact fit for your vehicle. For any further assistance, please visit your nearest Advance Auto store or call us directly at 1-877-ADVANCE (238-2623) and one of our representatives there would be more than happy to assist you.

      Answered on 12/27/2012 by Vincent from AAP
  • Q:

    How do you install wheel hub bearings for Dodge Charger Daytona R/T?
    Asked on 11/11/2012 by Elz

    1 answer

    • CUSTOMER CARE

      A:

      With reference to this National Ball Bearing (Part No. 206) install the slide hammer onto the lug studs and secure with tightened lug nuts. This may take several attempts and a couple of breaks in between to remove the hub bearing from the knuckle. Pay close attention to your progress and try to determine when the bearing will separate. Take note of how the backing plate is installed between the knuckle and the bearing so you can replace it in the same manner. Place the backing plate in its original position and place the new bearing onto the knuckle. Manipulate the drive-shaft spindle splines into the center of the hub bearing. Push the bearing on as far as you can, making sure to line it up correctly if ABS lines or plugs are present. Replace the wheel-bearing assembly bolts. They're pretty long, so as soon as you can thread them into the new bearing, start to tighten them. Pull the bearing in by tightening the bolts a little bit at a time and then switching to the next bolt to make sure the bearing assembly does not shift in the knuckle and cause damage. Once the bearing is drawn in flush, use the breaking bar to get the bolts as tight as you can get them. For further assistance, please feel free to call us at 1-877-238-2623 or visit your nearest Advance Auto Parts store and one of our representatives would be more than happy to assist you.

      Answered on 11/11/2012 by Steve from AAP
  • Q:

    How many of these are used in one hub assembly on a 98 blazer?
    Asked on 4/12/2012 by Anonymous

    1 answer

    • CUSTOMER CARE

      A:

      Only one axle shaft bearing is used for one hub assembly on your Blazer and this National Ball Bearing with part# 206 fits your 1998 Chevrolet Blazer.

      Answered on 4/13/2012 by Vincent from AAP
  • Q:

    I have a 2000 Ford Ranger 4x4 4.0 liter. I need front wheel bearings for both inner and outer. What is the part numbers I will need?
    Asked on 3/27/2012 by APKS from Hickory, NC

    2 answers

    • A:

      You have to replace the whole hub assy. on the 4X4's.

      Answered on 3/14/2014 by lluckie01 from Show Low, AZ
    • CUSTOMER CARE

      A:

      Unfortunately we are unable to locate the exact part for the Front wheel bearings for a 2000 Ford Ranger 4x4 4.0L. I would recommend that you check with a nearest Advance Auto store and our representative would be glad to assist you further.

      Answered on 3/29/2012 by John the Car-Doc from AAP
  • Q:

    would this fit a 98 ford ranger 4x4
    Asked on 3/12/2012 by roadster from Lafayete In

    1 answer

    • CUSTOMER CARE

      A:

      Yes, this National Ball Bearing (Part No. 206) fits your 1998 Ford Ranger .

      Answered on 3/12/2012 by Dennis from AAP
  • Q:

    I have a 2002 Dodge Durango 4wd 5.9L V8...need front wheel bearing replaced, gonna do both, dont really have the money to replace the entire hub assembly, but still want quality bearings, I have been told that I can just replace the bearings but am not sure which ones to get, or if I need an inner and outer for each side.
    Asked on 3/7/2012 by Anonymous from Dothan, AL

    1 answer

    • CUSTOMER CARE

      A:

      No, this National Ball Bearing with part# 206 does not fit your 2002 Dodge Durango. National Ball Bearing with part# 207 should be an exact fit for your your 2002 Dodge Durango.

      Answered on 3/10/2012 by Vincent from AAP
  • Q:

    i have 1999 dodge durango and iv notice a humming sound coming from one of my front wheels,gets louder as speed lncreases and im driving strait,but when i turn the steering wheel slightly to the left the huming stops can the bearings cause this problem?
    Asked on 11/15/2011 by Anonymous

    2 answers

    • A:

      YES THIS IS A BAD BEARING

      Answered on 12/1/2011 by JC from DALLAS GA
    • CUSTOMER CARE

      A:

      Yes, the bearing fits your 1999 dodge durango. The most common symptom of bad wheel bearings is noise coming from the wheel or tire area of a moving vehicle. This is often a grinding, grating noise that gets progressively louder as the vehicle is driven faster. Bad wheel bearings are easily heard, but often not easily diagnosed, at least initially, because they are not a common vehicle part that needs to be regularly serviced or replaced.

      Answered on 11/15/2011 by John the Car-Doc from AAP
Displaying questions 1-10Previous | Next »

Do you have a question about this product? 

Create or view your online garage

Check out the specials in our monthly flyer

 
 
Disclaimer We strive to keep all information accurate and up-to-date; however, product availability, pricing, promotions and store hours are subject to change without notice. Please contact Customer Care if you have any questions or corrections.