Carburetor Adapter Kit
Hover over the image to zoom in
Share this:

Mr. Gasket Carburetor Adapter Kit

Part No. 1932 Warranty Details  

Fit of this part varies by vehicle & equipment specs Type of Fit

This carburetor adapter kit installs quickly and easily when used with the included gaskets, studs, nuts and washers. Adapters are made of die cast aluminum and has a nominal height of 1/2 inch. Various sizes available.

Product Features:
  • Quick and Easy Installation
  • Diecast Aluminum Adapters
  • Includes Gaskets and Studs
  • Including Nuts and Washers
Back To Top

REVIEW SNAPSHOT®

by PowerReviews
Mr. GasketCarburetor Adapter Kit
 
3.5

(based on 4 reviews)

Ratings Distribution

  • 5 Stars

     

    (1)

  • 4 Stars

     

    (1)

  • 3 Stars

     

    (1)

  • 2 Stars

     

    (1)

  • 1 Stars

     

    (0)

75%

of respondents would recommend this to a friend.

Pros

  • Lightweight (3)

Cons

No Cons

Best Uses

  • Everyday driving (3)
  • Performance driving (3)

Reviewed by 4 customers

Displaying reviews 1-4

Back to top

 
4.0

Works very good! But had to buy stud kit

By 

from Sarasota,fl

About Me Casual Driver, Truck Enthusiast

Pros

  • Durable
  • Easy To Install
  • Improves Engine Efficiency
  • Increases Power
  • Lightweight

Cons

    Best Uses

    • Everyday Driving
    • Performance Driving
    • Replacement

    Comments about Mr. Gasket Carburetor Adapter Kit:

    Had to buy their stud kit when I saw on the review that the included hardware wasn't long enough and when I opened the included hardware it wasn't good for my edelbrock other then that it is a nice product includes gaskets

    Comment on this reviewHelp Icon

    (2 of 2 customers found this review helpful)

     
    5.0

    Great product

    Profile Image

    By 

    from Tennessee

    About Me Truck Enthusiast

    See all my reviews

    Ask me a question

    3 or more reviews submitted

    Pros

    • Durable
    • Easy To Install

    Cons

      Best Uses

      • Everyday Driving
      • Performance Driving

      Comments about Mr. Gasket Carburetor Adapter Kit:

      Had square bore intake and wanted to install a Q-Jet on my Ford truck. Just flipped this upside down and viola! No leaks and easy to do.

      Comment on this reviewHelp Icon

      (6 of 10 customers found this review helpful)

       
      2.0

      Difficult to install!

      By 

      from Williamsburg, Ohio

      About Me Auto Enthusiast

      Verified Buyer
      Helpful Reviewer

      Pros

      • Lightweight

      Cons

      • Difficult To Install

      Best Uses

      • Performance Driving
      • Replacement
      • Restoration

      Comments about Mr. Gasket Carburetor Adapter Kit:

      Bolts to hold the Edlerbrock carb on were too short!

      Comment on this reviewHelp Icon

      (3 of 9 customers found this review helpful)

       
      3.0

      ccc

      By 

      from erie pa

      Verified Buyer
      Helpful Reviewer

      Pros

      • Lightweight

      Cons

      • No instructions
      • Threads in nuts different

      Best Uses

      • Everyday Driving

      Comments about Mr. Gasket Carburetor Adapter Kit:

      no instructions, muts can be mixed and ruin threads on studs

      • Car & Truck:
      • Mechanic

      Comment on this reviewHelp Icon

      Displaying reviews 1-4

      Back to top

      Do you have questions about this product?

       

      Ask a question, get answers from real customers and in-house experts. For further assistance, please review your support options on our Contact Us page.

      12 Questions | 13 Answers
      Displaying questions 1-10Previous | Next »
      • Q:

        I have a stock 57 Chevy w a 283 Rochester 4 barrel. Will this adapter work, if not do you recommend one that will work?
        Thanks,
        Mike
        Asked on 3/19/2016 by Mike

        1 answer

        • CUSTOMER CARE

          A:

          Hi Mike, I'm glad to assist you! This Mr. Gasket Carburetor Adapter Kit - Part No. 1932 is not specifically made for your vehicle. This kit fits square flange carburetors to quadra-jet 4-barrel intake manifolds and is 3/4 inch thick with an open center, square bore to spread bore. You will need to see what type you have and match it accordingly to what we offer.

          Answered on 3/25/2016 by Solomon from AAP
      • Q:

        I have a stock 350 intake 4 barrel I got a holley 600cmf carb will this plate bolt this carb up to the stock intake?
        Asked on 2/18/2016 by Big B from paducah ky

        1 answer

        • CUSTOMER CARE

          A:

          Hi Big B, glad to help you! This Mr. Gasket Carburetor Adapter Kit (Part No. 1932) fits square flange carburetors to quadra-jet 4-barrel intake manifolds and is 3/4" thick with an open center, square bore to spread bore.

          Answered on 2/19/2016 by Steve from AAP
      • Q:

        Will the carb adapter kit by Mr. Gasket work with a Quadrajet Carb
        #7029241 on my 1971 Buick GS 455. If not, can you advise as to what adapter kit will fit this configuration.
        Asked on 9/2/2015 by Reggiewat from Havana, Florida

        1 answer

        • CUSTOMER CARE

          A:

          Happy to answer your question Reggiewat! Looking at some specs for this kit the mounting flange shows to fit a spread bore Quadrajet. The Carburetor bolt pattern will be 4-bolt (5 5/8 in X 5 1/8in) and the manifold bolt pattern will be 4-bolt (5 5/8in x 4 1/4in). The flange thickness will be .750 inches.

          Answered on 9/2/2015 by Panda from AAP
      • Q:

        Is Mr Gasket part no. 56A the correct gasket for the base of this?
        Asked on 6/17/2015 by Herb

        1 answer

        • CUSTOMER CARE

          A:

          Hi Herb! Yes, the Mr. Gasket Carburetor Base Gaskets 56A would be the one for this Mr. Gasket Carburetor Adapter Kit - Part No. 1932.

          Answered on 6/17/2015 by Solomon
      • Q:

        i have a square bore intake manifold and a spread bore rochester quadrojet e4me ...will this work?
        Asked on 1/3/2013 by pete

        1 answer

        • CUSTOMER CARE

          A:

          No, I am sorry. The Mr. Gasket Carburetor Adapter Kit - Part No. 1932t is not compatible with square bore intake manifold and a spread bore Rochester quadrajet e4me. Unfortunately I do not see a compatible gasket kit for your application available online. However I would recommend that you check with the nearest Advance Auto store or call us toll free at: 1-877-238-2623 and one of our representatives will gladly assist you with any questions or concerns you may have.

          Answered on 1/4/2013 by John the Car-Doc from AAP
      • Q:

        WHAT IS THE PART NUMBER FOR THE GASKET THAT FITS THIS ADAPTER PLATE?
        Asked on 12/13/2012 by CALEB

        1 answer

        • CUSTOMER CARE

          A:

          This Mr. Gasket Carburetor Adapter Kit - part# 1932 includes gaskets, studs, nuts and washers with it. For any further assistance, please visit your nearest Advance Auto store or call us directly at 1-877-ADVANCE (238-2623) and one of our representatives there would be more than happy to assist you.

          Answered on 12/13/2012 by Vincent from AAP
      • Q:

        I have a 1964 olds 98 it have a 6.7 liter engine in it will this conversion kit fit the intake.
        Asked on 10/7/2011 by Skip from Augusta, GA

        1 answer

        • CUSTOMER CARE

          A:

          If your vehicle has 4 barrel carburetor intake, then this part will fit.

          Answered on 10/7/2011 by Dennis from AAP
      • Q:

        I want to replace my stock quadrajet to an edelbrock 600 on my 350, will this work
        Asked on 6/28/2011 by Anonymous

        1 answer

        • CUSTOMER CARE

          A:

          This adaptor should fit any 4 barrel carburetor intake.

          Answered on 6/30/2011 by Vincent from AAP
      • Q:

        i have a edelbrock square bore with a spread bore intake.will this work??
        Asked on 2/15/2011 by Anonymous

        1 answer

        • CUSTOMER CARE

          A:

          For further assistance, please provide the exact model and engine size of the vehicle in question.

          Answered on 5/4/2011 by David the Dynamite Parts Guy from AAP
      • Q:

        I want to take off my 4bbl Edelbrock carb and put on a 2bbl motorcraft carb on my same intake manafold. Will this adaptor work for me like this?
        Asked on 12/10/2010 by cron from Muskegon MI

        1 answer

        • CUSTOMER CARE

          A:

          This one will not work for you. I do not see one on our site for the application you need it for.

          Answered on 12/10/2010 by Mike the Auto Parts Master from AAP
      Displaying questions 1-10Previous | Next »

      Do you have a question about this product? 

      Check out the specials in our monthly flyer.
       
       
      Disclaimer We strive to keep all information accurate and up-to-date; however, product availability, pricing, promotions and store hours are subject to change without notice. Please contact Customer Care if you have any questions or corrections.