Strut-Mate Strut Boot Kit
Hover over the image to zoom in
Share this:

Monroe Strut-Mate Strut Boot Kit

Part No. 63631 Warranty Details  

See if this part fits a specific vehicle.

Check Vehicle Fit

Heavy-duty construction and unique design features make the Monroe® Strut-Mate® boot kit the quality choice for maximum rod protection and improved strut life. Damaged boots may not protect the rod finish. A pitted piston rod can lead to premature strut failure. Deteriorated OE bumpers may not offer adequate protection from severe suspension movement, leading to premature strut failure.

Product Features:
  • Tie-Strap: Secures new boot to strut housing.
  • Self Draining Design: Eliminates retention of moisture and other unwanted contaminants.
  • Unique Boot Bumper Attachment Method: Simplifies installation.
  • Boot: Provides rod protection from rust and corrosion enhancing service life.
  • Soft Entry Jounce Bumper: Constructed of highest quality closed cell micro-cellular urethane for maximum durability, helps prevent severe impacts.
Back To Top
Body Length:6.460 in

REVIEW SNAPSHOT®

by PowerReviews
MonroeStrut-Mate Strut Boot Kit
 
1.7

(based on 3 reviews)

Ratings Distribution

  • 5 Stars

     

    (0)

  • 4 Stars

     

    (0)

  • 3 Stars

     

    (0)

  • 2 Stars

     

    (2)

  • 1 Stars

     

    (1)

Reviewed by 3 customers

Displaying reviews 1-3

Back to top

 
2.0

disapointed

By 

from Escondido, CA

About Me Mechanic

Pros

  • It will work

Cons

  • Cheaply Made
  • Does not fit coerrectly

Best Uses

    Comments about Monroe Strut-Mate Strut Boot Kit:

    i bought this boot and bump stop kit because i bought Monroe shocks. but i would not recommend this to anyone if you are looking at buying a kit find another. the price was about $10 less than the dealer price. this product just seemed pretty cheaply made and the end of the boot didn't even secure correctly to the shock end. it looked really bad. i would of definitely returned them, but i needed to get my shocks in. if i would have done it again i would have just bought from the dealer

    • Was this a gift?:
    • No

    Comment on this reviewHelp Icon

     
    1.0

    Useless

    By 

    from Alton IL

    See all my reviews

    3 or more reviews submitted

    Comments about Monroe Strut-Mate Strut Boot Kit:

    Doesn't fit on the Monroe strut it was sold with. Didn't include any retainers as the box and instructions called for and Monroe support is useless. 02 Nissan Sentra SE-R Spec V

    • Was this a gift?:
    • No

    Comment on this reviewHelp Icon

    (1 of 1 customers found this review helpful)

     
    2.0

    Very Disappointed

    By 

    from Indianapolis IN

    See all my reviews

    Verified Buyer
    3 or more reviews submitted

    Pros

    • Sort of work

    Cons

    • Bad Tech Support
    • Incorrect Directions
    • Plastic-like Bellows

    Best Uses

    • Store Shelf Dust Catcher

    Comments about Monroe Strut-Mate Strut Boot Kit:

    Very frustrating to have the Monroe struts and mounts install effortlessly, but lose all kinds of time with the Monroe Strutmate Boot/Bumper sets. The instructions on the box called for clips and straps that were missing. Re-order and return...same thing. Store manager called Monrie "Installation specialist"..."Re-use the existing ones". My old OEM Nissans had none. I think they just snap together but the bumpers snap upside-down and right-side up and deep and shallow. The picture on the instructions is totally different. I hope I ended up with them correct. Also, I was hoping for a softer siliconized rubber boot. These feel like they will get brittle with age and cold

    Comment on this reviewHelp Icon

    Displaying reviews 1-3

    Back to top

    Do you have questions about this product?

     

    Ask a question, get answers from real customers and in-house experts. For further assistance, please review your support options on our Contact Us page.

    2 Questions | 3 Answers
    Displaying questions 1-2
    • Q:

      Ok, I need this for a Jetta 2000 VR6 Gl MK4, for the rear shock.
      Asked on 9/20/2012 by A. Olivari from Caguas, P.R.

      2 answers

      • CUSTOMER CARE

        A:

        Please check with the Monroe Shock-Mate Shock Absorber Boot Kit - part# SA1997 which is for rear and is an exact fit for your 2000 Volkswagen Jetta GL. For any further assistance, please visit your nearest Advance Auto store or call us directly at 1-877-ADVANCE (238-2623) and one of our representatives there would be more than happy to assist you.

        Answered on 9/20/2012 by Vincent from AAP
      • CUSTOMER CARE

        A:

        Please check with the Monroe Shock-Mate Shock Absorber Boot Kit - part# SA1997 which is for rear and is an exact fit for your 2000 Volkswagen Jetta GL. For any further assistance, please visit your nearest Advance Auto store or call us directly at 1-877-ADVANCE (238-2623) and one of our representatives there would be more than happy to assist you.

        Answered on 9/20/2012 by Vincent from AAP
    • Q:

      Can I use the same one for the back shocks?
      Asked on 9/20/2012 by A. Olivari from Caguas, P.R.

      1 answer

      • CUSTOMER CARE

        A:

        Sorry, this Monroe Strut-Mate Strut Boot Kit - part# 63631 is for front. In order to locate the exact strut boot kit, please provide the year, make, model and engine size of the vehicle. For any further assistance, please visit your nearest Advance Auto store or call us directly at 1-877-ADVANCE (238-2623) and one of our representatives there would be more than happy to assist you.

        Answered on 9/20/2012 by Vincent from AAP
    Displaying questions 1-2

    Do you have a question about this product? 

    Check out the specials in our monthly flyer.
     
     
    Disclaimer We strive to keep all information accurate and up-to-date; however, product availability, pricing, promotions and store hours are subject to change without notice. Please contact Customer Care if you have any questions or corrections.