Max-Air Air Shock Absorber
Hover over the image to zoom in
Max-Air Air Shock Absorber
Share this:

Monroe Max-Air Air Shock Absorber

Part No. MA762 Warranty Details  

See if this part fits a specific vehicle.

Check Vehicle Fit

The Max-AirĀ® shock absorber is ideal for vehicles that haul heavy loads or tow trailers. Designed to maintain level vehicle height, they can be inflated or deflated as needed...from 20 psi to 150 psi with the vehicle loaded. Capacity is limited by vehicle suspension, tires and transmission. See vehicle owner's manual for details.

Product Features:
  • 1/2 inch Piston Rod: Hardened and precision ground rod for consistent performance and long service life.
  • All Weather Fluid: Contains special modifiers to reduce friction and ensure smooth rod reaction.
  • Full Displaced Valving: Better valving range on both the compression and extension cycles of the unit for a smooth comfortable ride.
  • Large Volume Air Chamber: Inflates up to 150 psi with vehicle loaded. Deflates for normal driving.
  • Lubricated Air Sleeve: Reduces friction for longer service life. Provides smoother operation during suspension movement.
  • Sintered Iron Piston: Stronger than traditional metals, enhances durability for longer service life.
  • Special Air Fitting: Resists air leakage.
Back To Top
Compressed Length:12.625 in
Dust Shield:Yes
Extended Length:20.625 in
Parts Pack(s):(2) P72
Rod Diameter:1/2
Travel Length:8.000 in

REVIEW SNAPSHOT®

by PowerReviews
MonroeMax-Air Air Shock Absorber
 
5.0

(based on 2 reviews)

Ratings Distribution

  • 5 Stars

     

    (2)

  • 4 Stars

     

    (0)

  • 3 Stars

     

    (0)

  • 2 Stars

     

    (0)

  • 1 Stars

     

    (0)

Reviewed by 2 customers

Displaying reviews 1-2

Back to top

 
5.0

great product....easy to install

By 

from ira,mi

Verified Buyer

Comments about Monroe Max-Air Air Shock Absorber:

easy to install...great product ..fast delivery

  • Was this a gift?:
  • No

Comment on this reviewHelp Icon

(2 of 2 customers found this review helpful)

 
5.0

Great Air Shocks

By 

from Apex, NC

Verified Buyer

Pros

  • Adjustable
  • Comfortable Ride
  • Easy To Install
  • Improves Launching
  • Privided Tire Clearance

Cons

    Best Uses

    • Everyday Driving
    • Performance Driving

    Comments about Monroe Max-Air Air Shock Absorber:

    Just what I needed to clear those 275-60 tires

    • Car & Truck:
    • Auto Enthusiast

    Comment on this reviewHelp Icon

    Displaying reviews 1-2

    Back to top

    Do you have questions about this product?

     

    Ask a question, get answers from real customers and in-house experts. For further assistance, please review your support options on our Contact Us page.

    7 Questions | 7 Answers
    Displaying questions 1-7
    • Q:

      i spoke with kyle last night and ordered a set of MA762 air shocks for my 72 nova , after looking at pics of the shocks i see that the are different than mine , mine have two mount holes for the top of the shock this part number has a threaded rod for the top mount . now looking at the MA706 shocks picture i see that they have the top mount that i need . my question is are these pictures accurate of what i will be getting or not ? if so why did kyle tell me to order this part number for my car ? please advise on what to do as the shocks i ordered are suppose to be in tomorrow and i don't want to pay for them and go through the hassle of returning them just to re order the correct ones .
      Asked on 11/9/2015 by jason from yarmouth MA. 02664

      1 answer

      • CUSTOMER CARE

        A:

        Hi Jason, I'm glad to assist you. The image of the product shown on our website may differ from actual product appearance. This Monroe Max-Air Air Shock Absorber (Part No. MA762) is an exact fit for your 1972 Chevrolet Nova.

        Answered on 11/11/2015 by Solomon
    • Q:

      Sir I have a 69 chevy chevelle, I was looking for Monroe max air shock absorber, MA 762, I like to know the travel extended, also I like to replaced my rear coil springs with moog with rear coil spring variable rate #cc501 with two rubber top and bottom rubber seals I need the spec and will it fit my 69 chevelle. thank you. Conrad...
      Asked on 4/15/2014 by zenon from naples, fla.

      1 answer

      • CUSTOMER CARE

        A:

        Hi Zenon, glad to assist you! The specifications of this shock absorber are compressed length: 14.625 inches, extended length: 24 inches, travel length: 9.375 inches and rod diameter: 1/2 inch. The Moog Coil Springs: Variable Rate (Part No. CC501) is an exact fit for your 1969 Chevrolet Chevelle. The specifications are spring size: Inside Diameter: 5.53 inches, Bar Diameter: .61 inch, Installed Height: 8 inches, Load rating: 810 lbs.

        Answered on 4/16/2014 by Steve from AAP
    • Q:

      will they fit on mono springs
      Asked on 3/30/2014 by Jeff from United States

      1 answer

      • CUSTOMER CARE

        A:

        Hi Jeff! This Monroe Max-Air Air Shock Absorber is vehicle specific. In order to check the exact fit, please provide the year, make, model and engine size of the vehicle.

        Answered on 3/31/2014 by Vincent from AAP
    • Q:

      will the air shocks work on a 1968 skylark convertible
      Asked on 7/30/2013 by butch from nj

      1 answer

      • CUSTOMER CARE

        A:

        The Monroe Max-Air Air Shock Absorber (Part No. MA762) is an exact fit for your 1968 Buick Skylark convertible. For any further assistance, please feel free to call us at: 1-877-238-2623 or visit the nearest Advance Auto Parts store and one of our Parts Pros will gladly assist you with any questions or concerns you may have.

        Answered on 7/30/2013 by Steve from AAP
    • Q:

      Is the price listed 74.99 for the set?
      Asked on 10/13/2011 by Anonymous

      1 answer

      • CUSTOMER CARE

        A:

        This part is sold as a pair.

        Answered on 10/13/2011 by Aaron from AAP
    • Q:

      How can I get a new fill valve?
      Asked on 7/19/2011 by Ray from Apex, NC

      1 answer

      • CUSTOMER CARE

        A:

        We will need more information including the year, make, model, and engine size of your application before we can make a suggestion. Please call us at 1-877-ADVANCE (238-2623) and we would be more than happy to further assist you.

        Answered on 7/20/2011 by Start with Shane! from AAP
    • Q:

      Can they go on the front of the car?
      Asked on 4/19/2011 by vmason from savannah, ga

      1 answer

      • CUSTOMER CARE

        A:

        No, it will fit only for the rear suspension.

        Answered on 4/19/2011 by Parts Guru Geo from AAP
    Displaying questions 1-7

    Do you have a question about this product? 

    Check out the specials in our monthly flyer.
     
     
    Disclaimer We strive to keep all information accurate and up-to-date; however, product availability, pricing, promotions and store hours are subject to change without notice. Please contact Customer Care if you have any questions or corrections.