Max-Air Air Shock Absorber
Hover over the image to zoom in
Max-Air Air Shock Absorber
Share this:

Monroe Max-Air Air Shock Absorber

Part No. MA700 Warranty Details  

See if this part fits a specific vehicle.

Check Vehicle Fit

The Max-AirĀ® shock absorber is ideal for vehicles that haul heavy loads or tow trailers. Designed to maintain level vehicle height, they can be inflated or deflated as needed...from 20 psi to 150 psi with the vehicle loaded. Capacity is limited by vehicle suspension, tires and transmission. See vehicle owner's manual for details.

Product Features:
  • 1/2 inch Piston Rod: Hardened and precision ground rod for consistent performance and long service life.
  • All Weather Fluid: Contains special modifiers to reduce friction and ensure smooth rod reaction.
  • Full Displaced Valving: Better valving range on both the compression and extension cycles of the unit for a smooth comfortable ride.
  • Large Volume Air Chamber: Inflates up to 150 psi with vehicle loaded. Deflates for normal driving.
  • Lubricated Air Sleeve: Reduces friction for longer service life. Provides smoother operation during suspension movement.
  • Sintered Iron Piston: Stronger than traditional metals, enhances durability for longer service life.
  • Special Air Fitting: Resists air leakage.
Back To Top
Compressed Length:12.52 in
Dust Shield Included:Yes
Extended Length:18.95 in
Parts Pack(s):No
Rod Diameter:1/2
Travel Length:6.43 in


by PowerReviews
MonroeMax-Air Air Shock Absorber

(based on 1 review)

Ratings Distribution

  • 5 Stars



  • 4 Stars



  • 3 Stars



  • 2 Stars



  • 1 Stars



Reviewed by 1 customer

Displaying review 1

Back to top


air shocks


from Urbana ohio

About Me Casual Driver

Verified Buyer


  • Easy Install
  • Easy To Use


  • Cheap Fill Valve

Best Uses

  • Large Cars
  • Small Cars
  • Trucks

Comments about Monroe Max-Air Air Shock Absorber:

Needed some lift for rear of 1968 Ford Galaxies air shocks seemed to be best answer. Also made a nice difference in the ride , made it just a little stiffer which was nice . Only complaint is fill valve is plastic should be steel like they used to be.

  • Was this a gift?:
  • No

Comment on this reviewHelp Icon

Do you have questions about this product?


Ask a question, get answers from real customers and in-house experts. For further assistance, please review your support options on our Contact Us page.

6 Questions | 6 Answers
Displaying questions 1-6
  • Q:

    Does it fit 1975 lincoln continental 4 door? Is the price for 1 shock absorber? Does it have a coil spring over it?
    Asked on 6/23/2016 by helen from United States

    1 answer



      Hi Helen, happy to assist you! This Monroe Max-Air Air Shock Absorber (Part No. MA700) is an exact fit for your 1975 Lincoln Continental 4 door model and it is sold as a pair. This kit includes the air line, air fittings and an air fill kit.

      Answered on 6/24/2016 by Steve from AAP
  • Q:

    do these shocks come with the valve to put air in the shock? can I adjust the shock to make the car ride more comfortable as in a softer ride. on the rear for my 1955 Chevrolet car 150 will it fit my 55 Chevrolet belair also if I choose to use it on it instead? what is the total cost with the dicounts you are offering?
    Asked on 6/14/2014 by ivey from kissimmee , fl

    1 answer



      I'm glad to assist, Ivey! This Monroe Max-Air Shock Absorber kit includes the air line, air fittings and an air fill kit. The shocks can be inflated or deflated from 20-150psi. Reducing pressure and can reduce ride harshness. These do fit your 1955 Chevrolet One-Fifty Series. These are also listed as an Exact Fit for your 1955 Chevrolet Bel Air as well. The price you receive will vary depending upon your local taxes and pricing as well as what promotional codes you have.

      Answered on 6/17/2014 by Heath, ASE Parts Specialist from AAP
  • Q:

    Will these rear air shocks fit my 1965 Rambler Ambassador 4dr sdn with the 287v8 motor?
    Asked on 11/28/2012 by daydreamer from East Northport NY

    1 answer



      Yes, this Monroe Max-Air Air Shock Absorber -part# MA700 is an exact fit for your 1965 AMC Rambler Ambassador. For any further assistance, please visit your nearest Advance Auto store or call us directly at 1-877-ADVANCE (238-2623) and one of our representatives there would be more than happy to assist you.

      Answered on 11/28/2012 by Vincent from AAP
  • Q:

    does the top of the shock have a threaded stud or a pair of ears for a top mount?
    Asked on 11/15/2012 by motor mike from lakewood colo.

    1 answer



      The Monroe Max-Air Air Shock Absorber - Part No. MA700 comes with the following mount: Stem Mount - 2.3/8" Stem Length X 3/8"-16 Thread Pitch. For any further assistance please feel free to call us at: 1-877-238-2623 or visit the nearest Advance Auto store and one of our representatives will gladly assist you with any questions or concerns you may have.

      Answered on 11/20/2012 by John the Car-Doc from AAP
  • Q:

    wil it fit a 1954chevy bel air
    Asked on 5/8/2012 by Anonymous

    1 answer



      Yes, this part Monroe Max-Air Air Shock Absorber, Part No. MA700 manufactured by Monroe fits your 1954 Chevrolet Bel Air. This part is for the Rear side of the vehicle.

      Answered on 5/10/2012 by Aaron from AAP
  • Q:

    Will these shocks fit a 1997 Cadillac Deville
    Asked on 9/13/2011 by Anonymous

    1 answer



      No, this part does not fit your 1997 Cadillac Deville.

      Answered on 9/13/2011 by Aaron from AAP
Displaying questions 1-6

Do you have a question about this product? 

Check out the specials in our monthly flyer.
Disclaimer We strive to keep all information accurate and up-to-date; however, product availability, pricing, promotions and store hours are subject to change without notice. Please contact Customer Care if you have any questions or corrections.