X-Stream Top Stainless Steel Assembly
Hover over the image to zoom in
Share this:

K&N X-Stream Top Stainless Steel Assembly

Part No. 66-3000 Warranty Details  
$159.99
Quantity  Add to Cart

Fit of this part varies by vehicle & equipment specs Type of Fit

Not only does the K&N XStream® add filter area, it actually redirects airflow inside the filter to pull in more air through the side pleats for even greater performance efficiency. Cleanable and reusable, the XStream® Air Flow Top filter delivers the best protection available for your engine.

Product Features:
  • Replacement Filter: E-3740
  • Washable and reusable air filter
  • Air filter top adds filter area
  • Improves air flow
  • Washable and reusable
Back To Top
Carburetor Neck/Air Horn Diameter:5.125 in
Color:Red
Finish:X-Stream
Height:3.875 in
Housing Material:Steel
Material:Cotton Gauze
Mounting Hardware Included:Yes
Outside Diameter:14 in
Shape:Round in

Do you have questions about this product?

 

Ask a question, get answers from real customers and in-house experts. For further assistance, please review your support options on our Contact Us page.

2 Questions | 2 Answers
Displaying questions 1-2
  • Q:

    will this fit a 1992 chevy c1500 pickup with a cowl induction hood?if not what do i need to make it fit. what is a recommendation for this truck?
    Asked on 5/25/2013 by sands from arkansas

    1 answer

    • CUSTOMER CARE

      A:

      This K&N X-Stream® Top Assembly - Part No. 66-3000 should fit your 1992 Chevrolet C1500 Pickup. However, this product is universal and not a direct fit. Some modifications may be required for proper installation. Installation steps are as follows : Thread the all-thread stud into the carburetor until it bottoms out. Secure with jam nut. If your carburetor has a 5/16 inches x 18 inches stud boss, use the provided 5/16 inches to 1/4 inches adapter. Install the neoprene gasket and the base plate on carburetor. Install the K&N air filter making sure it is fully seated in base. Thread one of the nylock nuts onto stud. Place a straight edge across the top of the air filter element. Adjust the nylock until the top of it is 3 turns below the bottom of the straight edge. Remove the stud and cut it 1-1/4 inches above the nylock. De-burr the end of the stud and make sure the nut threads on smoothly. Re-install the stud making sure the nylock is still 3 turns below the straight edge. Place one of the steel washers on the stud. Install the X-Stream Air Flow Top making sure it is fully seated on the air filter all the way around. Install rubber washer. Install steel washer. Install nylock nut - It should become tight 1-1/2 to 2 turns after contacting the flat washer. For any further assistance please feel free to call us at: 1-877-238-2623 or visit the nearest Advance Auto Parts store and one of our Parts Pros will gladly assist you with any questions or concerns you may have.

      Answered on 5/26/2013 by Morgan from AAP
  • Q:

    will this fit a 1992 chevy c1500 pickup with a cowl induction hood?if not what do i need to make it fit. thanks
    Asked on 5/25/2013 by sands from arkansas

    1 answer

    • CUSTOMER CARE

      A:

      This K&N X-Stream® Top Assembly - Part No. 66-3000 should fit your 1992 Chevrolet C1500 Pickup. However, this product is universal and not a direct fit. Some modifications may be required for proper installation. Installation steps are as follows : Thread the all-thread stud into the carburetor until it bottoms out. Secure with jam nut. If your carburetor has a 5/16 inches x 18 inches stud boss, use the provided 5/16 inches to 1/4 inches adapter. Install the neoprene gasket and the base plate on carburetor. Install the K&N air filter making sure it is fully seated in base. Thread one of the nylock nuts onto stud. Place a straight edge across the top of the air filter element. Adjust the nylock until the top of it is 3 turns below the bottom of the straight edge. Remove the stud and cut it 1-1/4 inches above the nylock. De-burr the end of the stud and make sure the nut threads on smoothly. Re-install the stud making sure the nylock is still 3 turns below the straight edge. Place one of the steel washers on the stud. Install the X-Stream Air Flow Top making sure it is fully seated on the air filter all the way around. Install rubber washer. Install steel washer. Install nylock nut - It should become tight 1-1/2 to 2 turns after contacting the flat washer. For any further assistance please feel free to call us at: 1-877-238-2623 or visit the nearest Advance Auto Parts store and one of our Parts Pros will gladly assist you with any questions or concerns you may have.

      Answered on 5/26/2013 by Morgan from AAP
Displaying questions 1-2

Do you have a question about this product? 

Check out the specials in our monthly flyer.
 
 
Disclaimer We strive to keep all information accurate and up-to-date; however, product availability, pricing, promotions and store hours are subject to change without notice. Please contact Customer Care if you have any questions or corrections.