Kwik Cold Weld Epoxy (2 oz.)
Hover over the image to zoom in
Share this:

JB Weld Kwik Cold Weld Epoxy (2 oz.)

Part No. 8276 Warranty Details  
J-B Kwik is designed to be an alternative to welding, soldering and brazing. J-B Weld bonds to most clean surfaces. It sets in a little as 4 minutes and fully cures in 4 to 6 hours. J-B Kwik is waterproof and resistant to petroleum, chemicals and acid. It can be drilled, machined, painted, sanded and filed once it's cured. J-B Weld is superstrong, nontoxic and temperature resistant up to 300°F.
Back To Top
Application Method:TWO PART MIX
Can Be Applied To Wet Surfaces:No
Curing Time:6 hrs
Product Color After Drying:BLACK
Weather Proof:Yes

REVIEW SNAPSHOT®

by PowerReviews
JB WeldKwik Cold Weld Epoxy (2 oz.)
 
3.3

(based on 4 reviews)

Ratings Distribution

  • 5 Stars

     

    (1)

  • 4 Stars

     

    (1)

  • 3 Stars

     

    (1)

  • 2 Stars

     

    (0)

  • 1 Stars

     

    (1)

100%

of respondents would recommend this to a friend.

Pros

  • Easy to use (3)

Cons

No Cons

Best Uses

No Best Uses

Reviewed by 4 customers

Displaying reviews 1-4

Back to top

(2 of 5 customers found this review helpful)

 
3.0

JB weld works. But not this time.

By 

from Florida

About Me Auto Enthusiast

See all my reviews

Ask me a question

Verified Buyer
3 or more reviews submitted

Pros

  • Easy To Use

Cons

    Best Uses

    • Automotive Repair Shop
    • Home Garage

    Comments about JB Weld Kwik Cold Weld Epoxy (2 oz.):

    Tried to weld a piece of metal on a seatback and it did not hold. Sorry Jb.

    Comment on this reviewHelp Icon

    (3 of 5 customers found this review helpful)

     
    5.0

    Fast, easy, great

    By 

    from Charlotte, NC

    Pros

    • Compact Design
    • Easy To Use
    • Reliable
    • Worth The Money

    Cons

      Best Uses

        Comments about JB Weld Kwik Cold Weld Epoxy (2 oz.):

        Used for cast-iron, easy to work with, fast dry, just perfect for the job.

        Comment on this reviewHelp Icon

        (54 of 100 customers found this review helpful)

         
        4.0

        JB weld

        By 

        from Yuma, AZ

        About Me Auto Enthusiast, Mechanic

        Pros

        • Can Withstand Use
        • Compact Design
        • Easy To Use
        • Reliable

        Cons

          Best Uses

          • Automotive Repair Shop
          • Home Garage

          Comments about JB Weld Kwik Cold Weld Epoxy (2 oz.):

          I have been a mechanic for years now and worked with GM, Ford, and Chrysler and for temporary repairs to get you by until you have the money for some repairs, I recommend JB weld to anybody. Its easy to use and works well. For the cost and performance of JB weld, there's nothing better.

          Comment on this reviewHelp Icon

          (74 of 130 customers found this review helpful)

           
          1.0

          [...]

          By 

          from Kenosha, WI

          See all my reviews

          Verified Buyer
          3 or more reviews submitted

          Pros

            Cons

            • Difficult To Use

            Best Uses

              Comments about JB Weld Kwik Cold Weld Epoxy (2 oz.):

              I have used JB weld for years & years and this time the hardener was WAY to thick and I believe it was dried out. I feel that there should be a expriation date on the package [...]

              Comment on this reviewHelp Icon

              Displaying reviews 1-4

              Back to top

              Do you have questions about this product?

               

              Ask a question, get answers from real customers and in-house experts. For further assistance, please review your support options on our Contact Us page.

              9 Questions | 10 Answers
              Displaying questions 1-9
              • Q:

                will this work to adhere a defroster tab to a rear window defroster and still conduct the power it needs?
                Asked on 2/25/2015 by justin from shawnee, ks

                2 answers

                • CUSTOMER CARE

                  A:

                  Happy to answer your question Justin! JB Weld will not work for your application; it is used for bonding and sealing various types of materials. For defroster repair I suggest the use of Part No 09117. Copy and Past this link to your URL address bar http://shop.advanceautoparts.com/p/permatex-complete-rear-window-defogger-repair-kit-09117/7160063- . Permatex has a YouTube video for this repair to walk you through. Copy and Past this link to your URL address bar https://www.youtube.com/watch?v=u_v942ySQHA

                  Answered on 2/25/2015 by Panda from AAP
                • CUSTOMER CARE

                  A:

                  I'm happy to help, Justin! JB Weld Kwik Cold Weld Epoxy (Part No. 8276) is considered an insulator and would not work well to adhere the defroster tab to your rear window defroster. Permatex Complete Rear Window Defogger Repair Kit (Part No. 09117) includes an electrically conductive adhesive to attach the defroster tab to your rear window defroster.

                  Answered on 2/25/2015 by Heath, ASE Parts Specialist from AAP
              • Q:

                Can this product be used to seal a crack in an aluminum oil pan ?
                Asked on 8/8/2014 by Joe

                1 answer

                • CUSTOMER CARE

                  A:

                  I'm happy to help, Joe! JB Weld Kwik Cold Weld Epoxy may allow you to patch the aluminum oil pan. This will take some preparation to ensure that the pan does not continue to leak after using the JB Weld. The area that the crack has occurred will need to be sanded so there is a rough surface to adhere to, the pan will need to be free of oil and contaminants and you may need some additional metal to provide a better seal.

                  This will most likely only yield a temporary fix. For a more permanent solution I recommend replacing the oil pan. If you remove your oil pan, don't forget to get a new gasket.

                  Answered on 8/15/2014 by Heath, ASE Parts Specialist from AAP
              • Q:

                Will this product set up when there is moisture present? such as repairing a drained radiator that has some residual fluid in the oooling fins?
                Asked on 7/16/2014 by TOO GREASEY from Hephzibah, GA

                1 answer

                • CUSTOMER CARE

                  A:

                  I'm happy to help! You would need to get the area completely dry for it to set up and cure. For applications where moisture is present, use SteelStik (#8267-S) or WaterWeld (#8277).

                  Answered on 7/18/2014 by Vincent from AAP
              • Q:

                Does it conduct electricity? Thanks.
                Asked on 2/17/2014 by m

                1 answer

                • CUSTOMER CARE

                  A:

                  Hi M, good question! I have searched and found that this product does not conduct electricity. J-B Kwik is waterproof and resistant to petroleum, chemicals and acid. It can be drilled, machined, painted, sanded and filed once it's cured. J-B Weld is superstrong, nontoxic and temperature resistant up to 300°F.

                  Answered on 2/18/2014 by Steve from AAP
              • Q:

                I have a return pipe that goes into a tank. The tank is made of high density polyethylene and the pipe is galvanize steel. The pressure in the tank is 80 psi. Will the adhesive be able to seal leak under pressure?
                Asked on 11/12/2013 by Ron from Honolulu, HI

                1 answer

                • CUSTOMER CARE

                  A:

                  That's a great question, Ron. Your application will cures to a dark grey color J-B Kwik Weld, is rated at a tensile strength of 2424 PSI and will withstand temperatures up to 300ºF.

                  Answered on 11/13/2013 by Max from AAP
              • Q:

                What is the COLDEST OPERATING TEMPERATURE for this product?
                Asked on 1/28/2013 by Lawrence from United States

                1 answer

                • CUSTOMER CARE

                  A:

                  This JB Weld Kwik Cold Weld Epoxy (2 oz.) - part# 8276 is a fast setting version of The Original J-B Weld two-part epoxy cold weld system that provides strong, lasting repairs to metal and multiple other surface types. After mixing, it forms a permanent bond and can be shaped, tapped, filed, sanded and drilled after curing. J-B KwikWeld has a 1:1 mixing ratio, sets in 6 minutes and is fully cured in 4-6 hours. It is rated at a tensile strength of 2424 PSI and will withstand temperatures up to 300ºF. If temperature is below 40ºF, then set time is longer. For any further assistance, please visit your nearest Advance Auto store or call us directly at 1-877-ADVANCE (238-2623) and one of our representatives there would be more than happy to assist you.

                  Answered on 1/28/2013 by Vincent from AAP
              • Q:

                I make jewelry and was needing something for soldering jump rings. Will this be suitable??
                Asked on 9/17/2012 by Sb

                1 answer

                • CUSTOMER CARE

                  A:

                  This JB Weld Kwik Cold Weld Epoxy (2 oz.) (Part No. 8276) is designed to be an alternative to welding, soldering and brazing. J-B Weld bonds to most clean surfaces. It sets in a little as 4 minutes and fully cures in 4 to 6 hours. J-B Kwik is waterproof and resistant to petroleum, chemicals and acid. It can be drilled, machined, painted, sanded and filed once it's cured. J-B Weld is superstrong, nontoxic and temperature resistant up to 300°F. For further assistance, please feel free to call us at 1-877-238-2623 or visit your nearest Advance Auto Parts store and one of our representatives would be more than happy to assist you.

                  Answered on 9/18/2012 by Steve from AAP
              • Q:

                WHAT IS THE EXPIRATION DATE ON JB KWIK AND JB WELD?
                Asked on 1/6/2012 by aeromach from Wichita Ks

                1 answer

                • CUSTOMER CARE

                  A:

                  Yes, the "Best Before" time on the JB Weld Kwik Cold Weld Epoxy (2 oz.) is One year from the date of manufacture.

                  Answered on 1/10/2012 by John the Car-Doc from AAP
              • Q:

                Can this product be applied in the cold weather
                Asked on 12/14/2010 by BBB600 from Wisconsin

                1 answer

                • CUSTOMER CARE

                  A:

                  Yes.

                  Answered on 12/14/2010 by Mike the Auto Parts Master from AAP
              Displaying questions 1-9

              Do you have a question about this product? 

              Check out the specials in our monthly flyer.
               
               
              Disclaimer We strive to keep all information accurate and up-to-date; however, product availability, pricing, promotions and store hours are subject to change without notice. Please contact Customer Care if you have any questions or corrections.