Street/Strip Carburetor
Hover over the image to zoom in
Share this:

Holley Street/Strip Carburetor

Part No. 0-1850S Warranty Details  

Fit of this part varies by vehicle & equipment specs Type of Fit

The Street HP uses the best features from Holley's race Bred 4150 HP carbs, but tamed for street and light competition use. The contoured main body from the 4150 HP has a tumble polished shiny finish. The metering system includes a timed spark port for a vacuum advance distributor and is calibrated for a hot street and strip engine setup for outstanding throttle response and drivability. A street HP base plate is used so there are plenty of vacuum ports for power brakes, PCV, etc.

Product Features:
  • Shiny/Chromate Dip Finish
  • Dual Feed Fuel Inlets
  • Mechanical Secondary
  • Center-Hung Float Bowls
  • Manual Choke
  • Power Valve Blowout Protection
Back To Top

REVIEW SNAPSHOT®

by PowerReviews
HolleyStreet/Strip Carburetor
 
4.3

(based on 4 reviews)

Ratings Distribution

  • 5 Stars

     

    (1)

  • 4 Stars

     

    (3)

  • 3 Stars

     

    (0)

  • 2 Stars

     

    (0)

  • 1 Stars

     

    (0)

100%

of respondents would recommend this to a friend.

Pros

No Pros

Cons

No Cons

Best Uses

  • Everyday driving (3)
  • Replacement (3)

Reviewed by 4 customers

Displaying reviews 1-4

Back to top

 
5.0

Excellent Fit, Better than expected

By 

from Louiville Kentucky

About Me Mechanic

Verified Buyer

Pros

  • Improves Engine Efficiency
  • Increased fuel economy

Cons

  • none

Best Uses

  • Everyday Driving
  • Replacement
  • Restoration

Comments about Holley Street/Strip Carburetor:

Ready to Run

Comment on this reviewHelp Icon

(3 of 3 customers found this review helpful)

 
4.0

Good product

By 

from Texas

See all my reviews

Verified Buyer
3 or more reviews submitted

Pros

  • Durable
  • Easy To Install

Cons

    Best Uses

    • Everyday Driving
    • Performance Driving
    • Racing
    • Replacement

    Comments about Holley Street/Strip Carburetor:

    These are great carbs for small blocks. An Edelbrock will run better right out of the box, but with a little tuning the Holley is superior.

    • Car & Truck:
    • Auto Enthusiast, Casual Driver, Competitive Driver, Mechanic, Truck Enthusiast

    Comment on this reviewHelp Icon

    (3 of 3 customers found this review helpful)

     
    4.0

    runs great

    Comments about Holley Street/Strip Carburetor:

    put it on an old 1969 Chevy C-60 dump truck...had to modify a lot of throttle stuff, but it seems fine

    Comment on this reviewHelp Icon

    (3 of 5 customers found this review helpful)

     
    4.0

    good basic carb allways does the job

    By 

    from la vernia tx

    See all my reviews

    Verified Buyer
    Helpful Reviewer

    Pros

    • Durable
    • Easy To Install
    • Lightweight

    Cons

      Best Uses

      • Everyday Driving
      • Performance Driving
      • Replacement

      Comments about Holley Street/Strip Carburetor:

      easy to adj change jets etc.

      • Car & Truck:
      • Auto Enthusiast, Truck Enthusiast

      Comment on this reviewHelp Icon

      Displaying reviews 1-4

      Back to top

      Do you have questions about this product?

       

      Ask a question, get answers from real customers and in-house experts. For further assistance, please review your support options on our Contact Us page.

      36 Questions | 41 Answers
      Displaying questions 1-10Previous | Next »
      • Q:

        How many CFM is it
        Asked on 7/15/2016 by Dave

        1 answer

        • CUSTOMER CARE

          A:

          I'm happy to help, Dave! This Holley Street/Strip Carburetor - Part No. 0-1850S is rated 600 CFM.

          Answered on 7/17/2016 by Solomon from AAP
      • Q:

        Is this a 2 or 4 barrel carb?
        Asked on 2/12/2013 by RAUL from Puerto Rico

        2 answers

        • CUSTOMER CARE

          A:

          The Holley Street/Strip Carburetor - Part No. 0-1850S is a 4 barrel street carburetor. For any further assistance please feel free to call us at: 1-877-238-2623 or visit the nearest Advance Auto Parts store and one of our Parts Pros will gladly assist you with any questions or concerns you may have.

          Answered on 2/12/2013 by John the Car-Doc from AAP
        • A:

          4 bbl

          Answered on 11/17/2013 by Fread the Dread from Alabama
      • Q:

        The description says that this carb has a mechanical secondaries. Also, it indicates a dual fuel feed inlet. Can you confirm, since I do not see that this model was offered in this configuration (mechanical secondaries or dual fuel feed inlets) from Holley. Finally, can you confirm that they are polished / chrome like finish? I need a set of two for my tunnel ram. Thanks!
        Asked on 12/18/2012 by Schmag from Glendale, Arizona

        1 answer

        • CUSTOMER CARE

          A:

          Sorry for any confusion caused. The Holley Street/Strip Carburetor - Part No. 0-1850S features vacuum secondaries, manual choke and single feed fuel inlet. Also this part comes with polished/chrome like finish. For any further assistance please feel free to call us at: 1-877-238-2623 or visit the nearest Advance Auto store and one of our representatives will gladly assist you with any questions or concerns you may have.

          Answered on 12/19/2012 by John the Car-Doc from AAP
      • Q:

        will it bolt up to a 1985 s10 blazer with a 2.8 came stock with carb and what cfm is it and price out the door
        Asked on 11/3/2012 by crazy lay

        1 answer

        • CUSTOMER CARE

          A:

          This Holley Street/Strip Carburetor (Part No. 0-1850S) is designed to fit most vehicles, but is not an exact fit for your 1985 Chevrolet S10 Blazer 2.8L. This is a universal, one size fits most part. This is a 600cfm carburetor. For any further assistance please feel free to call us at: 1-877-238-2623 or visit the nearest Advance Auto store and one of our representatives will gladly assist you with any questions or concerns you may have.

          Answered on 11/4/2012 by Rick from AAP
      • Q:

        1991 dodge ramcharger 318 V8 wil it replace throttle body and what modifications besic=des the fuel pressure
        Asked on 10/24/2012 by smurf

        1 answer

        • CUSTOMER CARE

          A:

          This Holley Street/Strip Carburetor (Part No. 0-1850S) is universal and not a direct fit for your 1991 Dodge Ramcharger. This is a universal, one size fits most part. For any further assistance, please feel free to call us at 1-877-238-2623 or visit your nearest Advance Auto Parts store and our representatives would be more than happy to assist you.

          Answered on 10/24/2012 by Rick from AAP
      • Q:

        Will this work/fit on 1968 Mustang with 428 motor
        Asked on 10/8/2012 by kennnnny from Soo/MI

        1 answer

        • CUSTOMER CARE

          A:

          This part Holley Street/Strip Carburetor, Part No. 0-1850S is universal and not a direct fit for your vehicle 1968 Mustang with 428 motor. This is a one size fits most, slight modification may be required.
          For any further assistance, please feel free to call us at 1-877-238-2623 or visit your nearest Advance Auto Parts store and our representatives would be more than happy to assist you.

          Answered on 10/9/2012 by Aaron from AAP
      • Q:

        is this the same as an 1850-2? if not then what will replace the 1850-2?
        Asked on 5/31/2012 by Anonymous

        1 answer

        • CUSTOMER CARE

          A:

          we would need more information like year, make, model and engine specification of your vehicle before we can make a suggestion.

          Answered on 6/3/2012 by Dennis from AAP
      • Q:

        will this carb fit on a contender in take
        Asked on 5/6/2012 by Anonymous

        1 answer

        • CUSTOMER CARE

          A:

          This part Holley Carburetor, Part No. 0-1850S manufactured by Holley is universal and not a direct fit for your vehicle. This is a one size fits most, slight modification may be required. Specification are: Number of Barrels: 4, Carburetor Flange: Square bore, CFM: 600, Choke: Manual, Fuel: Gasoline, Secondary Type: Vacuum, New or Remanufactured: New, Fuel Inlet: Single, Carburetor Finish: Silver, Ford Kickdown: Yes, Throttle Linkage Type: Universal.
          WARNING: This carburetor is not designed for use with any Chrysler automatic overdrive transmission. SEVERE transmission damage may result from improper application use.
          Also, Please check the Installation Instruction for this part Part No. 0-1850S that has been sent to your mail address.

          Answered on 5/9/2012 by Aaron from AAP
      • Q:

        Is this carb a double pumper?
        Asked on 4/9/2012 by Anonymous from South Dakota

        1 answer

        • CUSTOMER CARE

          A:

          The specification of this part Holley Carburetor, Part No. 0-1850S manufactured by Holley: Number of Barrels: 4, Carburetor Flange: Square bore, CFM: 600, Choke: Manual, Fuel: Gasoline, Secondary Type: Vacuum, New or Remanufactured: New, Fuel Inlet: Single, Carburetor Finish: Silver, Ford Kick down: Yes, Throttle Linkage Type: Universal. NOTE: New non-adjustable needle and seat float.

          Answered on 4/10/2012 by Aaron from AAP
      • Q:

        will this fit into a 2010 Ford Mustang V6
        Asked on 4/4/2012 by Anonymous

        1 answer

        • CUSTOMER CARE

          A:

          Yes, this Holley Carburetor Part number 0-1850S fit your 2010 Ford Mustang V6. However, this product is universal and not a direct fit some modifications may be required for proper installation.

          Answered on 4/5/2012 by Steve from AAP
      Displaying questions 1-10Previous | Next »

      Do you have a question about this product? 

      Check out the specials in our monthly flyer.
       
       
      Disclaimer We strive to keep all information accurate and up-to-date; however, product availability, pricing, promotions and store hours are subject to change without notice. Please contact Customer Care if you have any questions or corrections.