Engine Brite Engine Cleaner Foamy
Hover over the image to zoom in
Share this:

Gunk Engine Brite Engine Cleaner Foamy

Part No. FEB1 Warranty Details  

Disclaimer: This product is not authorized to be shipped/picked-up CA.

Clean Engines run cooler, look better & last longer! Gunk Foamy formula quickly removes dirt, dust and road grime from Cars, Trucks, Power Mowers, Marine, RV’s, ATV’s, Bikes, Farm Equipment and Tractors. Clean your engine with Gunk Foamy and then protect it with Gunk Shine. Safe on most underhood rubber, plastic and paint when used as directed.

Product Features:
  • Safely removes dirt, dust and road grime and can be used on all vehicles
  • Foam clings to vertical surfaces and picks up dirt
  • Quick, effective foaming action
  • Rinses easily with water
Back To Top
Aerosol:Yes
Container Material:Metal
Flammable:Yes
Foaming Action:Yes
Water Soluble:Yes

REVIEW SNAPSHOT®

by PowerReviews
GunkEngine Brite Engine Cleaner Foamy
 
4.3

(based on 8 reviews)

Ratings Distribution

  • 5 Stars

     

    (6)

  • 4 Stars

     

    (0)

  • 3 Stars

     

    (1)

  • 2 Stars

     

    (0)

  • 1 Stars

     

    (1)

88%

of respondents would recommend this to a friend.

Pros

  • Easy to use (7)
  • Effectively removes dirt & grime (6)
  • Safe to use (5)
  • Protects finish (3)

Cons

No Cons

Best Uses

  • Anywhere-anytime (3)
    • Reviewer Profile:
    • Auto enthusiast (4)

Reviewed by 8 customers

Displaying reviews 1-8

Back to top

 
5.0

sparkling engine

By 

from St. Charles, MO

Verified Buyer

Pros

  • Easy To Use

Cons

  • Messy

Best Uses

  • Remove Dirt And Grime

Comments about Gunk Engine Brite Engine Cleaner Foamy:

Does work as it should. Seems to foam for a few seconds and then starts to work. Was the first time I used this in a long time and the product did what it was supposed to do. Now when I work on the vehicle next time, I should not get so dirty.

  • Was this a gift?:
  • No
 
5.0

BRIGHT ENGINE !!!

By 

from Chesapeake, VA

About Me Casual Driver

Verified Buyer

Pros

  • Easy To Use
  • Effectively Removes Dirt & Grime
  • Looks Good
  • Reached Areas With Ease
  • Safe To Use

Cons

    Best Uses

    • Anywhere-Anytime

    Comments about Gunk Engine Brite Engine Cleaner Foamy:

    Cleaned grime underneath engine with ease.

    (1 of 1 customers found this review helpful)

     
    5.0

    Would definitely buy and use this again

    By 

    from Pittsburgh, PA

    About Me Auto Enthusiast

    Pros

    • Easy To Use
    • Effectively Removes Dirt & Grime
    • Long Reaching Spray
    • Protects Finish
    • Safe To Use

    Cons

      Best Uses

        Comments about Gunk Engine Brite Engine Cleaner Foamy:

        This product worked great. It is for lightly soiled/dirty engine compartments with light grease/oil. My engine was dirty but not very oily/greasy. I sprayed this all over (being careful around electronics/coils/alternator). I followed up with a brush/sponge to loosen up dirt and grime and let it sit 10-15 minutes. After a light water spray/heavier deep in the engine compartment - and everything came out very clean. I cleaned up major water pools and let it drip dry for 15 minutes and then I started the engine and went for a long drive to dry everything out. Great product, heck of a great price, will use again.

        (5 of 12 customers found this review helpful)

         
        5.0

        Good degreaser

        By 

        from Slidell, La.

        About Me Auto Enthusiast, Truck Enthusiast

        See all my reviews

        Verified Buyer
        3 or more reviews submitted

        Pros

        • Easy To Use
        • Effectively Removes Dirt & Grime
        • Safe To Use

        Cons

          Best Uses

            Comments about Gunk Engine Brite Engine Cleaner Foamy:

            The foamy cleaner doesn't run off as fast as the regular. It does have an odor but what engine degreaser doesn't? Follow the directions and it works well.

            (21 of 42 customers found this review helpful)

             
            5.0

            Completely cleans engine

            By 

            from Florida

            About Me Auto Enthusiast, Casual Driver, Competitive Driver, Truck Enthusiast

            Pros

            • Deep Cleans
            • Easy To Use
            • Effectively Removes Dirt & Grime
            • Protects Finish
            • Safe To Use

            Cons

              Best Uses

              • Anywhere-Anytime
              • Coastal Elements
              • Extreme Weather
              • Intensive Detailing

              Comments about Gunk Engine Brite Engine Cleaner Foamy:

              Cleans off everything and anything on your engine deeply penetrates dirt and roadgrime and sludge.

              (34 of 58 customers found this review helpful)

               
              5.0

              Great for Small ENgines

              By 

              from Newton, MA

              About Me Auto Enthusiast, Tractor Hobbyist

              See all my reviews

              Verified Buyer
              3 or more reviews submitted

              Pros

              • Easy To Use
              • Effectively Removes Dirt & Grime
              • Protects Finish
              • Safe To Use

              Cons

              • Strong Odor

              Best Uses

              • Small engine detailing

              Comments about Gunk Engine Brite Engine Cleaner Foamy:

              This foaming cleaner is the only one that seems to work on small engines, specifically in riding mowers. It clings to the surface and removes thick grime from the engine, chassis, and even the fuel tank and oil cap on the riding mowers I detail thoroughly. It's very easy to use. You just spray it on the surfaces, let it sit for a few minutes (not more than about 5) and spray off with a jet spray.

              (92 of 172 customers found this review helpful)

               
              1.0

              This product did not worked well.

              By 

              from Greenbelt,MD

              About Me Car Owner

              Pros

                Cons

                • Ineffective

                Best Uses

                  Comments about Gunk Engine Brite Engine Cleaner Foamy:

                  I used this product on my avalon ,waited for 15 minutes and all of the grease was still on the engine.Very depressing .

                  (99 of 180 customers found this review helpful)

                   
                  3.0

                  Foamy Engine Brite Engine Degreaser

                  By 

                  from Miami, Florida

                  About Me Car Owner

                  Verified Buyer
                  Helpful Reviewer

                  Pros

                  • Easy To Use
                  • Effectively Removes Dirt & Grime

                  Cons

                  • Messy

                  Best Uses

                  • Anywhere-Anytime

                  Comments about Gunk Engine Brite Engine Cleaner Foamy:

                  Foamy Engine Brite Engine Degreaser (17 oz.) by Gunk

                  Displaying reviews 1-8

                  Back to top

                  Do you have questions about this product?

                   

                  Ask a question, get answers from real customers and in-house experts. For further assistance, please review your support options on our Contact Us page.

                  5 Questions | 5 Answers
                  Displaying questions 1-5
                  • Q:

                    Do you have to protect any thing under the hood before treating with this product?
                    Asked on 1/18/2014 by todd

                    1 answer

                    • CUSTOMER CARE

                      A:

                      Hi Todd, good question! Gunk Foamy Engine Brite Engine Degreaser is a low-odor aerosol spray engine cleaner specially designed for lightly soiled engines that safely removes grease, dirt and grime. It does not require any protection under the hood before treating with this product.

                      Answered on 1/20/2014 by Steve from AAP
                  • Q:

                    Can you use it on chrome or powder coated surface ?
                    Can you use it on a motorcycle ?
                    Asked on 11/1/2013 by HD from charlotte

                    1 answer

                    • CUSTOMER CARE

                      A:

                      Hi HD, the Gunk Engine Brite Engine Cleaner Foamy (Part No. FEB1) quickly removes dirt, dust and road grime from Cars, Trucks, Power Mowers, Marine, RV’s, ATV’s, Bikes, Farm Equipment and Tractors. Clean your engine with Gunk Foamy and then protect it with Gunk Shine. Safe on most underhood rubber, plastic and paint when used as directed.

                      Answered on 11/1/2013 by Steve from AAP
                  • Q:

                    will this work with jb weld
                    Asked on 4/8/2013 by paul from vinton,va.

                    1 answer

                    • CUSTOMER CARE

                      A:

                      This Solder Seal/Gunk Foamy Engine Brite Engine Degreaser (17 oz.) (Part no: FEB1) works with the JB weld. For any further assistance please feel free to call us at: 1-877-238-2623 or visit the nearest Advance Auto Parts store and one of our Parts Pros will gladly assist you with any questions or concerns you may have.

                      Answered on 4/9/2013 by Max from AAP
                  • Q:

                    after i put it on, do i need to scrub or can i let it sit then rinse it away with water
                    Asked on 5/27/2010 by Anonymous

                    1 answer

                    • CUSTOMER CARE

                      A:

                      I have personally used this product both ways. I have used it to where I have just sprayed it on, let it sit and then spray it off and spray it on, let it sit and then spray it off. Both uses work. However, I have found that if you spray it on, let it sit and scrub it, it does work alot better.

                      Answered on 5/27/2010 by Mike from AAP
                  • Q:

                    will this clean up power steering fluid that has sprung a leak
                    Asked on 4/10/2010 by Donnie from Harrisburg, pa

                    1 answer

                    • CUSTOMER CARE

                      A:

                      If you spray this onto the surface with the fluid, let it sit for a little while and then spray it off with a hose or pressure washer, it does a pretty good job of cleaning it up. For the really tough spots, some scrubbing will help.

                      Answered on 4/12/2010 by Mike from AAP
                  Displaying questions 1-5

                  Do you have a question about this product? 

                  Check out the specials in our monthly flyer.
                   
                   
                  Disclaimer We strive to keep all information accurate and up-to-date; however, product availability, pricing, promotions and store hours are subject to change without notice. Please contact Customer Care if you have any questions or corrections.