Standard Header
Hover over the image to zoom in
Share this:

Flowtech Standard Header

Part No. 11100FLT Warranty Details  

See if this part fits a specific vehicle.

Check Vehicle Fit

Product Features:
  • Fuel Economy From The Engine
  • Leak Test For Max Performance
  • Mandrel-Formed Power Plenum
  • Leakproof O-Ringed Port Seals
  • Include All Mounting Hardware
Back To Top
Collector Port Diameter:3 in
Gasket Or Seal Included:Yes
Material:Steel
Mounting Hardware Included:Yes
Port Shape:Round
Tube Direction:Sideways
Tube Size:1.625 in

REVIEW SNAPSHOT®

by PowerReviews
FlowtechStandard Header
 
2.4

(based on 5 reviews)

Ratings Distribution

  • 5 Stars

     

    (0)

  • 4 Stars

     

    (1)

  • 3 Stars

     

    (2)

  • 2 Stars

     

    (0)

  • 1 Stars

     

    (2)

33%

of respondents would recommend this to a friend.

Reviewed by 5 customers

Displaying reviews 1-5

Back to top

 
4.0

flotech headers

By 

from Hawkins Wi

Verified Buyer

Pros

  • Fast Delivery
  • Good Price

Cons

  • Not Enough Info

Best Uses

    Comments about Flowtech Standard Header:

    Ordering parts online through advance is relatively easy although when I went to order the headers I wanted to know how big was the collector pipe that was coming off them and I couldn't find an answer. As a matter of fact I looked at their previous questions and someone asked the same question and got the wrong answer. I wanted to order glasspacks at the same time but didn't because I didn't have the info.

    • Was this a gift?:
    • Yes
     
    1.0

    1 fit well 1 didn't

    By 

    from Ohio

    Verified Buyer

    Comments about Flowtech Standard Header:

    it took 4 hours a a torch to bend the pass. side down so it wouldn't hit the floor.

     
    1.0

    Does not fit 1971 Camaro

    Comments about Flowtech Standard Header:

    The right header will not fit. The flange of the collector hits the floorpan preventing the rear two header flange bolts from threading into the head.

    I do not know if the left one fits.

     
    3.0

    Good for the price

    By 

    from Daytona Fl

    See all my reviews

    Verified Buyer
    Helpful Reviewer

    Pros

    • Increases Power
    • Lightweight

    Cons

    • Difficult To Install
    • Modification Needed

    Best Uses

      Comments about Flowtech Standard Header:

      Fast order. Got what I ordered.

      (3 of 5 customers found this review helpful)

       
      3.0

      Don't judge a book by its cover

      By 

      from southern Colorado

      See all my reviews

      Helpful Reviewer

      Pros

      • Adds Style

      Cons

        Best Uses

        • Replacement
        • Restoration

        Comments about Flowtech Standard Header:

        Image on web site shows chrome headers, the headers I recieved are painted. Product was mis- represented !! The old saying you get what you paid for stands true.

        • Car & Truck:
        • Mechanic

        Displaying reviews 1-5

        Back to top

        Do you have questions about this product?

         

        Ask a question, get answers from real customers and in-house experts. For further assistance, please review your support options on our Contact Us page.

        15 Questions | 17 Answers
        Displaying questions 1-10Previous | Next »
        • Q:

          What Ac bracket will I need to use for 1971 caprice sbc 400
          Asked on 11/20/2016 by Demac from St. Petersburg fl.

          1 answer

          • CUSTOMER CARE

            A:

            Happy to help, Demac! You'll need the Flowtech A/C Bracket - Part No. 10042FLT for this Flowtech Standard Header - Part No. 11100FLT, which is an exact fit for your 1971 Chevrolet Caprice.

            Answered on 11/22/2016 by Solomon from AAP
        • Q:

          Will this work for 1974 chevy caprice classic 400 small block with AC?
          Asked on 9/26/2015 by maurice from Cincinnati

          2 answers

          • CUSTOMER CARE

            A:

            Hi there Maurice! I will be happy to help with the question you had! We researched it and we where able to find that these headers are compatible with a 74 Caprice with the small black 400/6.6litre engine with AC. And that's a very nice old school car by the way.

            Answered on 9/28/2015 by Panda from AAP
          • CUSTOMER CARE

            A:

            Yes, Maurice, this Flowtech Standard Header (Part No. 11100FLT) is an exact fit for your 1974 Chevrolet Caprice Classic 400 small block with AC.

            Answered on 9/28/2015 by Steve from AAP
        • Q:

          Will these headers fit 1969 camero with air conditioning
          Asked on 5/4/2015 by Purps from Eastlake ohio

          2 answers

          • CUSTOMER CARE

            A:

            Hi Purps, I'm glad to assist you! This Flowtech Standard Header - Part No. 11100FLT will not fit 1969 Camaro air conditioning. You'll need the Hooker Headers Competition Header - Part No. 2451HKR which would work with air conditioning.

            Answered on 5/4/2015 by Solomon
          • CUSTOMER CARE

            A:

            Hi Purps, I'm glad to assist you! This Flowtech Standard Header (Part No. 11100FLT) fit few models in 1969 Chevrolet Camero with out Air Conditioning. Please provide the engine size so I can we can provide the accurate information for you.

            Answered on 5/4/2015 by Steve from AAP
        • Q:

          It is a 69camero with air conditioning and a350 4 barrel
          Asked on 5/4/2015 by Purps from Eastlake ohio

          1 answer

          • CUSTOMER CARE

            A:

            Hi Purps! This Flowtech Standard Header - Part No. 11100FLT will not fit 1969 Camaro air conditioning. You'll need the Hooker Headers Competition Header - Part No. 2451HKR which would work with air conditioning.

            Answered on 5/4/2015 by Solomon
        • Q:

          what size reducers does it come with?
          Asked on 6/23/2014 by rawrrr

          1 answer

          • CUSTOMER CARE

            A:

            I'm happy to help! These Flowtech standard headers do not include any reducers. The header has a 1-5/8” primary tube diameter and 3” collector diameter. It is designed for stock heads with factory straight plugs (4-1/2" plug spacing).

            For more details about this product, please visit: http://www.holley.com/11100FLT.asp

            Answered on 6/25/2014 by Heath, ASE Parts Specialist from AAP
        • Q:

          will they work with muncie 4 speed ?
          Asked on 10/26/2013 by Mr. B from Tazewell,TN

          1 answer

          • CUSTOMER CARE

            A:

            Hi Mr. B, in order to assist you with this Flowtech Standard Header - Part No. 11100FLT, please provide the year, make, model and engine size of your vehicle.

            Answered on 10/28/2013 by Max from AAP
        • Q:

          will this header work with angle plug dart heads
          Asked on 1/22/2013 by mitchell from waynesboro, ga

          1 answer

          • CUSTOMER CARE

            A:

            This Flowtech Standard Header - part# 11100FLT is vehicle specific. In order to check the exact fit, please provide the year, make, model and engine size of the vehicle. For any further assistance, you may also visit your nearest Advance Auto store or call us directly at 1-877-ADVANCE (238-2623) and one of our representatives there would be more than happy to assist you.

            Answered on 1/22/2013 by Vincent from AAP
        • Q:

          MY 72 NOVA WAS A 3 SPEED IN THE FLOOR BUT I CHANGE IT TO A AUTOMATIC INN THE FLOOR.WILL I HAVE PROBLEMS WITH HEADERS INTERFERRING WITH STERRING LINKAGE OR STARTER?
          Asked on 7/6/2012 by POOCHIE from WAGRAM N.C

          1 answer

          • CUSTOMER CARE

            A:

            This Flowtech Manifold/Header (Part No. 11100FLT) is a correct fit for your 72 Chevrolet Nova. Changing the transmission should not be a problem with this header. For any further assistance please feel free to call us at: 1-877-238-2623 or visit the nearest Advance Auto store and one of our representatives will gladly assist you with any questions or concerns you may have.

            Answered on 7/9/2012 by John the Car-Doc from AAP
        • Q:

          do these fit the monza without much modifacation
          Asked on 3/30/2012 by Anonymous

          1 answer

          • CUSTOMER CARE

            A:

            In order to check the exact fit application, please provide the year, make, model and engine size of the vehicle and we would be better able to assist you.

            Answered on 3/31/2012 by Steve from AAP
        • Q:

          the "black paint" is it hight temp. paint or just paint for shipping and no rust. Also are collecters included?
          Asked on 3/23/2012 by Dan from apple valley,ca

          1 answer

          • CUSTOMER CARE

            A:

            Yes, this part Flowtech Manifold/Header, Part No. 11100FLT manufactured by Flowtech comes with all mounting hardware, including bolts, nuts, and premium gaskets. Yes, it includes Reducers and are satin black hi-temperature painted.
            For compatibility of this part with your vehicle, please provide your vehicle make, model and engine specification.

            Answered on 3/26/2012 by Aaron from AAP
        Displaying questions 1-10Previous | Next »

        Do you have a question about this product? 

        Check out the specials in our monthly flyer.
         
         
        Disclaimer We strive to keep all information accurate and up-to-date; however, product availability, pricing, promotions and store hours are subject to change without notice. Please contact Customer Care if you have any questions or corrections.