Super 40 Muffler - 3.00 Center In / 3.00 Offset Out - Aggressive Sound
Hover over the image to zoom in
Share this:

Flowmaster Inc. Super 40 Muffler - 3.00 Center In / 3.00 Offset Out - Aggressive Sound

Part No. 953047 Warranty Details  

See if this part fits a specific vehicle.

Check Vehicle Fit

The Super 40 features Flowmaster's Delta Flow technology. It's larger case profile provides the best of both worlds of performance and sound. The Super 40 has that deep powerful sound of the Original 40 series but with all the benefits of performance and low interior resonance from the Delta Flow technology. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
Back To Top
Body Height:5 in
Body Material:Aluminized Steel
Body Width:10 in
Case Length:13.5 in
Case Shape:Flowmaster Case
Finish:Black
Inlet Diameter:3 in
Inlet Location:Center
Outlet Diameter:3 in
Outlet Location:Offset
Reversible:No
Shape:Flowmaster Case

REVIEW SNAPSHOT®

by PowerReviews
Flowmaster Inc.Super 40 Muffler - 3.00 Center In / 3.00 Offset Out - Aggressive Sound
 
4.5

(based on 4 reviews)

Ratings Distribution

  • 5 Stars

     

    (2)

  • 4 Stars

     

    (2)

  • 3 Stars

     

    (0)

  • 2 Stars

     

    (0)

  • 1 Stars

     

    (0)

100%

of respondents would recommend this to a friend.

Pros

  • Great sound (4)
  • Easy to install (3)
  • Increases power (3)

Cons

No Cons

Best Uses

  • Everyday driving (4)
  • Performance driving (3)
    • Reviewer Profile:
    • Casual driver (3)

Reviewed by 4 customers

Displaying reviews 1-4

Back to top

(5 of 11 customers found this review helpful)

 
5.0

Awesome sound

By 

from Harlingen, Tx

About Me Casual Driver

Verified Buyer
Helpful Reviewer

Pros

  • Easy To Install
  • Great Sound
  • Increases Power

Cons

    Best Uses

    • Everyday Driving

    Comments about Flowmaster Inc. Super 40 Muffler - 3.00 Center In / 3.00 Offset Out - Aggressive Sound:

    Install on a 2000 suburban with little modification. Thanks to others reviews I really enjoy the sound of my vehicle now.

    Comment on this reviewHelp Icon

    (9 of 18 customers found this review helpful)

     
    4.0

    Good sound

    By 

    from Lincoln, NE

    About Me Casual Driver

    Verified Buyer
    Helpful Reviewer

    Pros

    • Easy To Install
    • Great Sound

    Cons

    • Said It Was Direct Fit

    Best Uses

    • Everyday Driving
    • Performance Driving
    • Replacement

    Comments about Flowmaster Inc. Super 40 Muffler - 3.00 Center In / 3.00 Offset Out - Aggressive Sound:

    Great sound, deep powerful exhaust tone, however site said it was a direct fit but yet I needed adaptors for it to fit 99 silverado

    Comment on this reviewHelp Icon

    (12 of 22 customers found this review helpful)

     
    4.0

    Nice sound

    By 

    from Cottekill N.Y.

    About Me Mechanic

    Verified Buyer
    Helpful Reviewer

    Pros

    • Great Sound
    • Increases Power

    Cons

    • None

    Best Uses

    • Everyday Driving
    • Performance Driving
    • Racing
    • Replacement

    Comments about Flowmaster Inc. Super 40 Muffler - 3.00 Center In / 3.00 Offset Out - Aggressive Sound:

    good sound

    Comment on this reviewHelp Icon

    (13 of 23 customers found this review helpful)

     
    5.0

    Truck sounds like a Truck should!

    Profile Image

    By 

    from Wildwood, GA

    About Me Casual Driver

    See all my reviews

    Ask me a question

    Verified Buyer
    3 or more reviews submitted

    Pros

    • Easy To Install
    • Great Sound
    • Increases Power

    Cons

      Best Uses

      • Everyday Driving
      • Performance Driving

      Comments about Flowmaster Inc. Super 40 Muffler - 3.00 Center In / 3.00 Offset Out - Aggressive Sound:

      Love how it sounds.

      Comment on this reviewHelp Icon

      Displaying reviews 1-4

      Back to top

      Do you have questions about this product?

       

      Ask a question, get answers from real customers and in-house experts. For further assistance, please review your support options on our Contact Us page.

      7 Questions | 7 Answers
      Displaying questions 1-7
      • Q:

        Is it required to purchase this muffler with the complete cat-back system? What negative implications could occur with using the product with existing manufacturers pipe?
        Asked on 7/11/2015 by Charlie from Sewell,nj

        1 answer

        • CUSTOMER CARE

          A:

          Good question Charlie I will be more than happy to help! It is not required to purchase the complete cat-back system. This is a universal muffler with 3" inlet and 3" outlet so it's designed to fit those existing pipe sizes. I don't see any negative implications but you may run into some problems if your pipes are rusted out. If that is the case then I would recommend doing the complete cat-back system.

          Answered on 7/28/2015 by JJMO ASE Parts Pro from AAP
      • Q:

        I have a 2002 Chevy avalanche on road edition with the 5.3 vin T engine i am planning on buying the poem tail pipe and was wondering if this was an exact fit for my truck or do i need extensions and would clamps be ok to use with or without the stress relief cuts.
        Asked on 2/24/2015 by Troy from Pedricktown, NJ

        1 answer

        • CUSTOMER CARE

          A:

          Hi Troy, happy to help you with your question! This muffler does show to be an exact fit so you shouldn’t have an issue with it. An exact fit tail pope that would work for your application would be Part No 55114 http://shop.advanceautoparts.com/p/dynomax-tail-pipe-55114/20380215- I have provided a link to it. Because of the design of the inlet this tail pipe will not slide into or over the outlet of the muffler, so you would not be able to use exhaust clamps. It would need to be welded.

          Answered on 2/24/2015 by Panda from AAP
      • Q:

        I have 05 silverado 4.8l and I think the pipes are 2-3/4", so how would I install it?
        Asked on 5/31/2014 by ahol17

        1 answer

        • CUSTOMER CARE

          A:

          I'm happy to help, Ahol17! Your 2005 Chevrolet Tahoe 4.8L has a stock 2 3/4" exhaust system. This will fit over the pipes. You may need a pipe reducer or there are some band clamps that will also provide pipe size reduction. If you are planning to attempt to expand any pipe, if you cut some stress reliefs into the pipe a pipe expander may allow a better fit of the pipe together and a standard clamp may work to hold the system together. Advance Auto Parts also carries catback exhaust systems for your truck. If you have difficulty with installing the system, I recommend utilizing our 'Need Repair Help?' link further down this page to get help from a certified mechanic that could assist with exhaust systems.

          Answered on 6/3/2014 by Heath, ASE Parts Specialist from AAP
      • Q:

        I have a 2001 Chevy Tahoe 5.3L and I was wondering if this part is really an exact fit meaning it while slide right in with no problems. I plan on cutting my exhaust pipe an inch from the in and three inches from the out side of the muffler then using an three inch exhaust pipe as an extension so that I would be able to connect my stock exhaust pipes, then clamp the in side of the muffler then clamp the extension to out side of the muffler and another clamp to clamp the extension to the stock pipe that connect to the exhaust tip. Do you think that will work or will I need hangers to hold the muffler or well it be fine with just the clamps. One more thing my exhaust is rusty and I plan on renting a exhaust pipe cutter and to use those things you have to apply force I'm afraid if I apply to much force the pipe will break do you have any recommendations of what I can do about that problem?
        Asked on 5/12/2014 by Steven (Nancy the Newbies Father) from Royal Oak,MI

        1 answer

        • CUSTOMER CARE

          A:

          I'm happy to help, Steven! Your 2001 Chevrolet Tahoe 5.3L has a stock 2 3/4" exhaust system. This will fit over the pipes. You may need a pipe reducer or there are some band clamps that will also provide pipe size reduction. If you are planning to attempt to expand any pipe, if you cut some stress reliefs into the pipe a pipe expander may allow a better fit of the pipe together and a standard clamp may work to hold the system together. Most exhaust is pretty rusty, but it can still be pretty tough. From what I see the system does not come with hangers near the muffler from Walker's diagram of the system. Here is a link to the diagram: http://mastercatalog.walkerexhaust.com/english/ExhaustCouponLargeScreen.asp?img=0827.

          Advance Auto Parts also carries catback exhaust systems for your Tahoe, such as Dynomax Part No. 19361 which also has an aggressive tone. Flowmaster has two, one mild under Part No. 17344 and moderate under Part No. 17368. Magnaflow's catback for your 2001 Tahoe is Part No. 15666. If you have difficulty with installing the system, I recommend utilizing our 'Need Repair Help?' link further down this page to get help from a certified mechanic that could assist with exhaust systems.

          Answered on 5/20/2014 by Heath, ASE Parts Specialist from AAP
      • Q:

        Hi I am mark dose this muffler for my 2006 Chevy 1500 crew cab
        Fit just right is it a do your self job & what dose come
        With this all the fixers or what do you need to buy more like clamps and hangers thanks for your. Help mark Vernon ct
        Asked on 2/21/2014 by Big mark from Vernon cy 06066Vernon ct 06066

        1 answer

        • CUSTOMER CARE

          A:

          Hi Mark, great question! This Super 40 muffler would be an exact fit for your 2006 Chevrolet Silverado 1500 LT. This does not include any installation hardware and you would need 3 inches clamps and 9.5 inches exhaust hangers for installing this muffler on your vehicle.

          Answered on 2/24/2014 by Vincent from AAP
      • Q:

        This muffler is an "exact fit" for my 1999 Chevy Silverado 5.3L will I need adapters or is the diameter of the inlet and outlet on this muffler large enough that is slides over the stock pipes? Thank you
        Asked on 2/17/2014 by Tyler from Lincoln, NE

        1 answer

        • CUSTOMER CARE

          A:

          Hi Tyler, glad to help you! This part is an exact fit for your 1999 Chevy Silverado 5.3L. The dimensions of this muffler should be large enough to slide over the stock pipes.

          Answered on 2/18/2014 by Steve from AAP
      • Q:

        It says it's an "exact fit" for my '06 Silverado. How true is that? Can I bolt it on and be done?
        Asked on 8/26/2012 by Big Guy from New Philadelphia, OH

        1 answer

        • CUSTOMER CARE

          A:

          Yes, this Flowmaster Inc. Mufflers - part# 953047 is an exact fit for your 2006 Chevrolet Silverado. For any further assistance, please visit your nearest Advance Auto store or call us directly at 1-877-ADVANCE (238-2623) and one of our representatives there would be more than happy to assist you.

          Answered on 8/26/2012 by Vincent from AAP
      Displaying questions 1-7

      Do you have a question about this product? 

      Check out the specials in our monthly flyer.
       
       
      Disclaimer We strive to keep all information accurate and up-to-date; however, product availability, pricing, promotions and store hours are subject to change without notice. Please contact Customer Care if you have any questions or corrections.