item(s) totaling $
See if this part fits a specific vehicle.
|This product doesnt fit any of your saved vehicles||Check Fit for another vehicle|
REVIEW SNAPSHOT®by PowerReviews
Reviewed by 2 customers
Displaying reviews 1-2
Comments about Felpro Oil Pan Gasket Set:
Have always used felpro gasket and always have out preformed any other brand. They are better designed to outlast any of your needs! If your gonna do the job right use Felpro gaskets.
Comments about Felpro Oil Pan Gasket Set:
superior sealing no sealer needed
Do you have questions about this product?
Ask a question, get answers from real customers and in-house experts. For further assistance, please review your support options on our Contact Us page.
Q:Is there any way to change oil pan on 1993 chevey s10 with out pulling the motor 2.8 5 speed
A:Instructions to change the oil pan: 1. Drain the oil from the pan. The drain bolt is located at the bottom corner of the pan. You can remove this plug with a crescent wrench. 2. Remove the bolts that attach the oil pan to the engine with a ratchet wrench and socket. The size of the socket may vary depending on the make of the vehicle, and may use either standard or metric bolt sizes. 3. Lower the pan to the ground. The old gasket will tear as you detach the pan from the engine. 4. Inspect the oil pan for dents, cracks, or chips that may cause leaks. If the pan is undamaged, it can be re-installed with a new gasket. 5. Scrape the top of the pan clean. You can use a puddy knife to remove the old gasket material. Scrape the bottom portion of the engine as well. Use a solvent to clean the top of the oil pan and the bottom of the engine. You will need a smooth, clean surface to reattach the new gasket and oil pan. 6. Carefully place the new gasket on the oil pan to be installed. You can use a liquid gasket material to ensure the gasket sticks to the pan. Make sure the gasket is placed properly so you do not cover any of the bolt holes. 7. Place the new oil pan in position. The new pan should line up the same as the old one. 8. Tighten all the bolts from the oil pan to the motor. The bolts should be snug in position. Some car manufacturers recommend using a thread sealing compound on oil-pan bolts. 9. Pour the required amount of oil back into the system. Usually this will require four to five quarts. The owner's manual for your car will tell you how much oil, and what type, to put in the engine. 10. Place a piece of cardboard under the oil pan of the car. Start the engine and wait a few minutes to ensure there are no leaks. For further assistance, please feel free to call us at 1-877-238-2623 or visit your nearest Advance Auto Parts store and one of our representatives would be more than happy to assist you.
Q:Is there anyway to change the oil pan gasket without removing the engine? I have a 1993 chevy S10 with a 2.8l engine and 5 speed manual trans. Body is a reg cab. I have been told that it is possible to jack up the engine after taking out the motor mounts to provide enough clearance to slide the gasket out and slde the new one in. Is this correct?
A:You should be able to do that. I have seen it before.
A:I depends on the make and model of your car. Most newer front wheel drive cars do have room to remove the oil pan and change out the gasket.
A:I am the person who asked this question. I was able to change the oil pan gasket but there are many things you have to do. First remove the cab bolts and raise the cab. I put pieces of 2x4 between the cab and frame. Second pull out the trans. Next I raised the engine after removing the motor mount bolts. Using different sizes of wood I was able to raise the engine up almost a foot. You will have to remove the oil pan gasket with the pan still up but I had a broken gasket so it came right out. Slide the new one in I came in from the rear and put my arm in through the front and was able to get it around the oil pump. Took a little while but it went in with ease. Just make sure to wipe it off with a little break cleaner.
Q:Is there amyway to change the oil pan gasket without removing the engine?
A:For further assistance, please provide the year, make, model and engine size of your vehicle