Intake Manifold Gasket Set
Hover over the image to zoom in
Share this:

Felpro Intake Manifold Gasket Set

Part No. MS 98014 T Warranty  

See if this part fits a specific vehicle.

Check Vehicle Fit

From the leader in aftermarket engine sealing, FEL-PRO the gaskets professionals trust.

Product Features:
  • Each gasket, set, or seal is built to meet or exceed all original equipment specifications and is validated for fit, form, and function
  • Application specific design to ensure a perfect fit and correct operation for unsurpassed quality that you can trust
  • FEL-PRO gasket sets are engineered and manufactured specifically for the aftermarket repair environment
  • Every part for the repair procedure is included in the kit unless otherwise noted
Back To Top
Intake Gasket Material:Rubber / Steel
Quantity Of Pieces:20

REVIEW SNAPSHOT®

by PowerReviews
FelproIntake Manifold Gasket Set
 
4.4

(based on 17 reviews)

Ratings Distribution

  • 5 Stars

     

    (9)

  • 4 Stars

     

    (7)

  • 3 Stars

     

    (0)

  • 2 Stars

     

    (0)

  • 1 Stars

     

    (1)

94%

of respondents would recommend this to a friend.

Pros

  • Easy to install (12)
  • Durable (10)

Cons

    Best Uses

    • Everyday driving (12)
    • Replacement (11)
    • Performance driving (3)
      • Reviewer Profile:
      • Casual driver (10), Mechanic (10), Auto enthusiast (7)

    Most Liked Positive Review

     

    Nice set

    Installed this kit in a 2000 Pontiac Grand Prix GT, 3800. Install went just fine, but the only instruction included was a note on when and where and how much to apply, when...Read complete review

    Installed this kit in a 2000 Pontiac Grand Prix GT, 3800. Install went just fine, but the only instruction included was a note on when and where and how much to apply, when it came to the black RTV. OK. I knew where almost everything went in this kit. I had no idea what the small blue rubber socket went to and I had no use for the smaller end rubber gaskets (must be for another vehicle). I wish it came with the gasket for the machining end of the lower intake... I must have received a newer version of this kit. I read some reviews stating that it didn't come with lower injector O-rings. Mine did. Upper and lower. I didn't feel like taking the chance of breaking an injector, so I didn't replace the uppers. All in all, good kit. Good quality. I always go Fel-pro when it's an option. FYI: Make sure you get the replacement bypass tubes that go into the tensioner pulley bracket. Both of mine broke on teardown...

    VS

    Most Liked Negative Review

     

    Caution--- Quality issues

    The metal gasket that goes between the heads and the manifold had pieces of rubber hanging off of it. If these get into your engine, you can say goodbuy to your motor as the...Read complete review

    The metal gasket that goes between the heads and the manifold had pieces of rubber hanging off of it. If these get into your engine, you can say goodbuy to your motor as the oil system will clog up and fry your bearings. Fel Pro dropped the ball on this part and I also read where others have had this same issue. Open a carton up in the store and see for yourself. If I thought sooner, I would have taken a photo to post.

    Reviewed by 17 customers

    Sort by

    Displaying reviews 1-10

    Back to top

    Previous | Next »

     
    5.0

    A Good Upgrade

    By csu6473

    from Ohio

    About Me Auto Enthusiast, Casual Driver, Mechanic

    Ask me a question

    Level 4

    Pros

    • Durable
    • Easy To Install
    • Fixes Factory Issue

    Cons

      Best Uses

      • Everyday Driving
      • Replacement

      Comments about Felpro Intake Manifold Gasket Set:

      This is a great replacement to the flimsy plastic LIM gasket. I have had this in place for about 20k miles with no issues, it completely solved the problem.

      Comment on this review(earn points)

       
      5.0

      Better than OEM

      By Brad

      from Venetia, PA

      About Me Auto Enthusiast, Casual Driver

      Verified Buyer
      3 or more reviews submitted

      Pros

      • Durable
      • Easy To Install
      • Improves Engine Efficiency

      Cons

        Best Uses

          Comments about Felpro Intake Manifold Gasket Set:

          Aluminium gaskets. Much better quality than OEM

          Comment on this review(earn points)

           
          5.0

          better than the original

          By hawk

          from minnesota

          About Me Mechanic

          Verified Buyer
          Level 2

          Pros

          • Easy To Install
          • Metal Carrier
          • Not At Risk From Dexcool

          Cons

            Best Uses

              Comments about Felpro Intake Manifold Gasket Set:

              ten times better than the GM plastic originals. though GM now has aluminum carrier upgraded gaskets, i've trusted fel-pro for years and they were a better price than going to the dealership. next step was to flush out the corrosive dexcool, replace the defective/cracked coolant by-pass elbows and install the updated upper intake plenum and then enjoy years of trouble free driving.

              Comment on this review(earn points)

               
              4.0

              good stuff

              By harvey

              from Topeka, Ks

              About Me Auto Enthusiast, Casual Driver, Mechanic, Truck Enthusiast

              Verified Buyer
              3 or more reviews submitted

              Pros

              • Easy To Install

              Cons

                Best Uses

                • Everyday Driving
                • Replacement

                Comments about Felpro Intake Manifold Gasket Set:

                I like the improvement to this product. Its necessary to make last the design flaw GM made to this gasket and the coolant reaction over time.

                Comment on this review(earn points)

                 
                5.0

                Massive upgrade

                By 3058

                from Columbia, SC

                About Me Mechanic

                Ask me a question

                Level 5

                Pros

                • Durable
                • Easy To Install
                • Improves Engine Efficiency

                Cons

                  Best Uses

                  • Everyday Driving
                  • Performance Driving
                  • Replacement

                  Comments about Felpro Intake Manifold Gasket Set:

                  Forget about the OE-style, if you're replacing intake gaskets use these. Far superior to the original "printed cardboard" type gaskets; these are aluminum with ribbed rubber, specifically designed to thwart the common intake leak on 3800 engines.

                  Comment on this review(earn points)

                  (0 of 1 customers found this review helpful)

                   
                  1.0

                  Caution--- Quality issues

                  By none

                  from Indiana

                  Verified Buyer
                  Level 1

                  Comments about Felpro Intake Manifold Gasket Set:

                  The metal gasket that goes between the heads and the manifold had pieces of rubber hanging off of it. If these get into your engine, you can say goodbuy to your motor as the oil system will clog up and fry your bearings. Fel Pro dropped the ball on this part and I also read where others have had this same issue. Open a carton up in the store and see for yourself. If I thought sooner, I would have taken a photo to post.

                  Comment on this review(earn points)

                   
                  5.0

                  Way better than original

                  By canairb

                  from Virginia Beach, VA

                  About Me Casual Driver

                  Verified Buyer
                  Level 2

                  Pros

                  • Better quality
                  • Durable
                  • Easy To Install

                  Cons

                  • none

                  Best Uses

                  • Replacement

                  Comments about Felpro Intake Manifold Gasket Set:

                  Better then original plastic gasket. This is aluminum with better sealing. Highly recommend.

                  Comment on this review(earn points)

                  (0 of 2 customers found this review helpful)

                   
                  5.0

                  I recomend this gasket set

                  By Mick

                  from Hornell NY

                  About Me Casual Driver

                  Verified Buyer
                  Level 3

                  Pros

                  • Durable
                  • Easy To Install
                  • Much better than OEM

                  Cons

                  • No cons here

                  Best Uses

                  • Everyday Driving

                  Comments about Felpro Intake Manifold Gasket Set:

                  I orered the parts required to replace the intake manifold and valve covers to do a complet job online. It saves time to make your list and get everthing all at once. No mistaks with the order!

                  Comment on this review(earn points)

                  (1 of 2 customers found this review helpful)

                   
                  4.0

                  Nice set

                  By ChanDMan

                  from Columbus, IN

                  About Me All Around Cool Cat, Auto Enthusiast, Mechanic

                  Level 2

                  Pros

                  • Exact fit

                  Cons

                  • Poor Instructions

                  Best Uses

                  • Replacement
                  • Restoration

                  Comments about Felpro Intake Manifold Gasket Set:

                  Installed this kit in a 2000 Pontiac Grand Prix GT, 3800. Install went just fine, but the only instruction included was a note on when and where and how much to apply, when it came to the black RTV. OK. I knew where almost everything went in this kit. I had no idea what the small blue rubber socket went to and I had no use for the smaller end rubber gaskets (must be for another vehicle). I wish it came with the gasket for the machining end of the lower intake... I must have received a newer version of this kit. I read some reviews stating that it didn't come with lower injector O-rings. Mine did. Upper and lower. I didn't feel like taking the chance of breaking an injector, so I didn't replace the uppers. All in all, good kit. Good quality. I always go Fel-pro when it's an option. FYI: Make sure you get the replacement bypass tubes that go into the tensioner pulley bracket. Both of mine broke on teardown...

                  Comment on this review(earn points)

                  (4 of 6 customers found this review helpful)

                   
                  5.0

                  another easy install

                  By JB

                  from Lakelnd Fl

                  About Me Casual Driver

                  Ask me a question

                  Verified Buyer
                  Level 4

                  Pros

                  • Easy To Install

                  Cons

                    Best Uses

                    • Everyday Driving

                    Comments about Felpro Intake Manifold Gasket Set:

                    was consuming antifreeze from factory gaskets ate up from Dexacool car only has 51k miles

                    Comment on this review(earn points)

                    Displaying reviews 1-10

                    Back to top

                    Previous | Next »

                    Do you have questions about this product?(earn points for answers!)

                     

                    Ask a question, get answers from real customers and in-house experts. Or contact Customer Care by email or call 1-877-238-2623.

                    16 Questions | 18 Answers
                    Displaying questions 1-10Previous | Next »
                    • Q:

                      Is this first or second design with or without locator pins this is the lower intake gasket set correct does it come with both lower and upper injector seals
                      Asked on 9/14/2013 by -_-_

                      1 answer

                      • CUSTOMER CARE

                        A:

                        This Felpro Intake Manifold Gasket Set - part# MS 98014 T is a lower intake manifold gasket set which includes rubber-plastic end seals, locating pins and intake manifold gaskets. Unfortunately, it does not include lower and upper injector seals. For any further assistance, please feel free to call us at: 1-877-238-2623 or visit the nearest Advance Auto Parts store and one of our Parts Pros will gladly assist you with any questions or concerns you may have.

                        Answered on 9/16/2013 by Vincent from AAP
                    • Q:

                      1999 grand prix gt what are the torque settings for lower intake
                      Asked on 7/31/2013 by ernie from cleveland,oh

                      1 answer

                      • CUSTOMER CARE

                        A:

                        The torque setting for lower intake manifold bolt is 15 Nm (11 ft. lbs.) For any further assistance, please feel free to call us at: 1-877-238-2623 or visit the nearest Advance Auto Parts store and one of our Parts Pros will gladly assist you with any questions or concerns you may have.

                        Answered on 8/1/2013 by Steve from AAP
                    • Q:

                      Does this kit come with the supercharger gasket needed since you must remove the s/c to get the intake off? Also, does Advance sell the lower fuel injector o-rings and if so, what is the part number? Almost forgot but does it come with a throttle body gasket?

                      Asking these questions for a 98 Pontiac GTP Grandprix
                      Asked on 3/26/2013 by dP

                      1 answer

                      • CUSTOMER CARE

                        A:

                        This Felpro Intake Manifold Gasket Set - part# MS 98014 T is an exact fit for your 1998 Pontiac Grand Prix GTP which includes lower set only with rubber-plastic end seals, locating pins and intake manifold gaskets. Please check the Felpro Fuel Injector O-Ring Set - part# ES 70599 which is an exact fit for your vehicle. For any further assistance, please feel free to call us at: 1-877-238-2623 or visit the nearest Advance Auto Parts store and one of our Parts Pros will gladly assist you with any questions or concerns you may have.

                        Answered on 3/27/2013 by Vincent from AAP
                    • Q:

                      where do the blue side pieces go?
                      also what is the intake torques spec? for a 2005 grand prix gtp
                      superchanged 3800
                      Asked on 1/18/2013 by mason from indiana

                      1 answer

                      • CUSTOMER CARE

                        A:

                        WIth reference to your inquiry on the Felpro Intake Manifold Gasket Set - part# MS 98014 T, the blue piece is a supplemental gasket if needed to fill in any spaces on the front or rear of the intake gasket. For your Grand Prix GTP, the torque specifications are: lower intake manifold bolt - 15 Nm (11 ft. lbs.) and upper intake manifold bolt (VIN K) - 10 Nm (89 inch lbs.). For any further assistance, you may also visit your nearest Advance Auto store or call us directly at 1-877-ADVANCE (238-2623) and one of our representatives there would be more than happy to assist you.

                        Answered on 1/18/2013 by Vincent from AAP
                    • Q:

                      does this gasket set use stock torque spec or is there a new torque spec? The upgraded gasket set for the 3.1 had a new torque spec.
                      Asked on 5/7/2012 by Anonymous

                      1 answer

                      • CUSTOMER CARE

                        A:

                        We will need more information including the year, make, model, and engine size of your application before we can make a suggestion.
                        For any further assistance please feel free to call 1-877-238-2623 and one of our representatives will gladly assist you with any questions or concerns you may have.

                        Answered on 5/10/2012 by Aaron from AAP
                    • Q:

                      Hi. I purchased this gasket set from Advanced Auto Parts for my 1999 Pontiac Firebird, Engine Code K. There are several pieces in the kit that I do not know what to do with. There are 5 O-Rings in varying sizes (the top row in the picture of the product), none of which do I know where they go... along with a small blue circular piece of plastic and a gasket for what looks like a thermostat housing. I also received a set of light blue lower intake manifold gasket seals (front and back) that I do not believe go to my car. Are these just extra pieces that are included, because this manifold set can be used for a variety of makes and models or do I just not know where they go? There was no instruction manual included with the product. Thank You.
                      Asked on 12/26/2011 by Doug from St. Augustine, Florida

                      1 answer

                      • CUSTOMER CARE

                        A:

                        This Felpro Intake Manifold Gasket Set(Part No. MS 98014 T) is applicable on selective Buick, Chevrolet, Oldsmobile and Pontiac vehicles. So the O-rings are offered in surplus depending on different types of vehicles. You can ignore the O-rings if its really not needed in your vehicle.

                        Answered on 12/30/2011 by John the Car-Doc from AAP
                    • Q:

                      Are the light blue side peices needed...2003 pontiac grand prix?
                      Asked on 12/20/2011 by Anonymous

                      1 answer

                      • CUSTOMER CARE

                        A:

                        Yes, it is the complete set of two Lower Intake Manifold Gaskets.These are High quality OE replacement intake manifold gaskets.

                        Answered on 12/21/2011 by DIY Daniel from AAP
                    • Q:

                      Is the smaller of the two black o-rings for the heater hose bypass fitting?
                      Are the two sets of end gaskets for two different models?
                      Asked on 11/14/2011 by Anonymous

                      1 answer

                      • CUSTOMER CARE

                        A:

                        This gasket set is engineered and manufactured specifically for the repair. Every part for the repair is included and indicated on the package label. In order to check the exact fit application, please provide the year, make, model and engine size of the vehicle.

                        Answered on 11/15/2011 by Vincent from AAP
                    • Q:

                      Just want to confirm that this set includes the fuel injector o-rings?
                      Asked on 7/18/2011 by Anonymous

                      1 answer

                      • CUSTOMER CARE

                        A:

                        Yes, this set includes o- rings for injectors.

                        Answered on 7/19/2011 by Vincent from AAP
                    • Q:

                      2000 buick century 3.1 engine these gaskets dont seem right
                      Asked on 2/22/2011 by skip from buffalo ny

                      1 answer

                      • CUSTOMER CARE

                        A:

                        No, these gaskets will not fit for your vehicle.

                        Answered on 2/23/2011 by Parts Guru Geo from AAP
                    Displaying questions 1-10Previous | Next »

                    Do you have a question about this product? 

                    Create or view your online garage

                    Check out the specials in our monthly flyer

                     
                     
                    Disclaimer We strive to keep all information accurate and up-to-date; however, product availability, pricing, promotions and store hours are subject to change without notice. Please contact Customer Care if you have any questions or corrections.