-
Your Store:
-
CARQUEST is now part of the Advance Auto Parts family
CARQUEST and Advance Auto Parts have joined forces to bring you an even better shopping experience. CARQUEST customers can now take advantage of all Advance online promotions, plus enjoy the convenience of ordering online and picking up at their nearest CARQUEST store, or shipping to home.
Felpro Gasket Materials
Fit of this part varies by vehicle & equipment specs
From the leader in aftermarket engine sealing, FEL-PRO the gaskets professionals trust.
Product Features:
Back To Top
Product Features:
- Each gasket, set, or seal is built to meet or exceed all original equipment specifications and is validated for fit, form, and function
- Application specific design to ensure a perfect fit and correct operation for unsurpassed quality that you can trust
- FEL-PRO gasket sets are engineered and manufactured specifically for the aftermarket repair environment
- Every part for the repair procedure is included in the kit unless otherwise noted
REVIEW SNAPSHOT®
by PowerReviewsFelproGasket Materials
(based on 4 reviews)
Ratings Distribution
100%
of respondents would recommend this to a friend.
Pros
- Versatile (3)
Cons
No Cons
Best Uses
- Car (3)
REVIEWS
Reviewed by 4 customers
Displaying reviews 1-4
Pros
- Ease In Use
- Versatile
Cons
Best Uses
- Car
Comments about Felpro Gasket Materials:
Installing a water pump on high performance sports car. Looked to this as an alternative to delay in special re-ordering defective gasket. Using old gasket as a template, produced an exact replica including complex shapes & bolt holes. This material cut cleanly & precisely without distortion or delamination. Applied high tack sealer to both sides. It worked perfectly.
Comments about Felpro Gasket Materials:
seems like best material for the money saves a ton over pre formed gaskets
Pros
- Can Withstand Use
- Versatile
Cons
Best Uses
- Car
- Garage
- RV
- Truck
Comments about Felpro Gasket Materials:
Custon cut gaskets are necessary with many vehicles. I recommend this for most oil, gas, water seal.
Pros
- Perfect for custom gasket
- Versatile
Cons
Best Uses
- Car
- Garage
- RV
- Truck
Comments about Felpro Gasket Materials:
I bought this Felpro Gasket Material when I couldn't find a specific carburetor gasket that I needed for my lawn mower. It was easy to cut into a custom gasket shape (using scissors or an exacto knife) and has worked great. The packaging lists it as applicable to sealing air, oil, fuel or water.
I've used this material before on other applications (including fuel connection gaskets and intake manifold gaskets) for a custom built race car. It has usually worked great and is nice to have on hand for the times when you can't go out and buy a specialty gasket.
Only downside is that the gasket tends to peel off in layers/shreds if you have to remove it after it's been installed for a while, but that's true of most fiber-based gaskets. Good thing is you'll have plenty of material left over to cut another one as long as you're working on something small. It'd also be nice to have multiple thicknesses of gasket material on hand, but this does fine for general purpose stuff.
Displaying reviews 1-4
Do you have questions about this product?(earn points for answers!)
Ask a question, get answers from real customers and in-house experts. Or contact Customer Care by email or call 1-877-238-2623.
12 Questions | 13 Answers
Displaying questions 1-10Previous | Next »
Q:
how big is itAsked on 9/1/2015 by mark from lagrange ky1 answer
CUSTOMER CARE
A:
Hi Mark! This Felpro Gasket Materials (Part No. 3157) is a 10 inches x 26 inches x 1/32 inch rubber and fiber gasket material sheet.Answered on 9/1/2015 by Solomon
Q:
I just need to know WHAT it's made Of ? And how thick it is .
Thank you .Asked on 8/10/2015 by woody from Salt Lake City Utah1 answer
CUSTOMER CARE
A:
Hi Woody, I'm glad to assist you! This Felpro Gasket Materials - Part No. 3157 is made of rubber fiber material. And this is 1/32 inch thick.Answered on 8/11/2015 by Solomon
Q:
What is the rubber material in this product? Buna-n,viton ,etc.Asked on 1/10/2014 by none from new york1 answer
CUSTOMER CARE
A:
Hi none, good question! This gasket material is made of rubber-fiber 1/32 - inch (10 x 26 - inch) sheet, material for use in sealing oil, coolant or gasoline and is recommended for use on timing cover, axle flange and differential carrier gasket applications.Answered on 1/12/2014 by Steve from AAP
Q:
will this material work on a chain saw cylinder gasketAsked on 1/5/2014 by tony from columbus1 answer
CUSTOMER CARE
A:
Hi Tony, good question! This gasket material is made of rubber-fiber 1/32 - inch (10 x 26 - inch) sheet, material for use in sealing oil, coolant or gasoline and is recommended for use on timing cover, axle flange and differential carrier gasket applications.Answered on 1/6/2014 by Steve from AAP
Q:
What kind of material is this made of? Does it stretch, rubbery?Asked on 10/12/2013 by curious from MN1 answer
CUSTOMER CARE
A:
Hi Curious, this Felpro Gasket Materials - Part No. 3157 is made of rubber-fiber 1/32 inches (10 inches x 26 inches) sheet, material for use in Sealing Oil, Coolant or Gasoline and is recommended for use on Timing Cover, Axle Flange & Differential Carrier Gasket applications.Answered on 10/13/2013 by Morgan from AAP
Q:
will this work for replacing a couple gaskets on a snowmobile piston head?Asked on 11/29/2012 by keith from cheboygan michigan1 answer
CUSTOMER CARE
A:
Yes, this Felpro Gasket Materials -part# 3157 should work fine for replacing gaskets on a snowmobile piston head. For any further assistance, please visit your nearest Advance Auto store or call us directly at 1-877-ADVANCE (238-2623) and one of our representatives there would be more than happy to assist you.Answered on 11/30/2012 by Vincent from AAP
Q:
could you put this on a turbo oil return line that connects right at the turbo body? can it handle the high temps?Asked on 6/2/2011 by Anonymous2 answers
CUSTOMER CARE
A:
In order to best answer your question, our technicians would be more than happy to assist you if you could please call us at 1-877-ADVANCE (238-2623).Answered on 7/6/2011 by Steve from AAPCUSTOMER CARE
A:
In order to best answer your question, our technicians would be more than happy to assist you if you could please call us at 1-877-ADVANCE (238-2623).Answered on 7/6/2011 by Steve from AAP
Q:
HOW THICK !!!!!!!!Asked on 4/27/2011 by Anonymous1 answer
CUSTOMER CARE
A:
It’s 1/32 in. (10 in. x 26 in.) sheet.Answered on 4/28/2011 by David the Dynamite Parts Guy from AAP
Q:
CAN THIS BE USED FOR MAKING A GASKET BETWEEN A CARBURATOR AND THE INTAKE MANIFOLD OF A SMALL GASOLINE ENGINE ABOUT 8 HP?Asked on 1/9/2011 by JOHN FERONY from L.I. NEW YORK1 answer
CUSTOMER CARE
A:
You should be fine using this.Answered on 1/11/2011 by Mike the Auto Parts Master from AAP
Q:
Can it be used to make a gasket for an oil pan?Asked on 10/19/2010 by RoJam1981 from AL1 answer
CUSTOMER CARE
A:
You may be able to but I highly recommend getting the actual oil pan gasket for your vehicle.Answered on 10/19/2010 by Mike the auto parts master from AAP
Displaying questions 1-10Previous | Next »
Disclaimer
We strive to keep all information accurate and up-to-date; however, product availability, pricing, promotions and store hours are subject to change without notice. Please contact
Customer Care
if you have any questions or corrections.