Performer-Plus Camshaft Kit
Hover over the image to zoom in
Share this:

Edelbrock Performer-Plus Camshaft Kit

Part No. 2102 Warranty Details  

See if this part fits a specific vehicle.

Check Vehicle Fit

Product Features:
  • Designed for Optimum Torque and Acceleration
  • Maximum Performance From Idle through Mid-Range
  • Matched to Edelbrock Performer Intakes
  • Includes Hydraulic Lifters and Assembly Lube
  • Major Improvement in Throttle Response and Torque
  • Use For Daily Drivers/Trucks/Vans/RVs/4x4s
  • Take The Guesswork Out Of Camshaft Selection
Back To Top
Advertised Exhaust Duration:288 deg
Advertised Intake Duration:278 deg
Basic Operating RPM Range:0-6750
Exhaust Duration:214 deg
Exhaust Valve Lift:0.442 in
Intake Duration:204 deg
Intake Valve Lift:0.42 in
Lifter Type:Hydraulic Flat Tappet

REVIEW SNAPSHOT®

by PowerReviews
EdelbrockPerformer-Plus Camshaft Kit
 
3.8

(based on 4 reviews)

Ratings Distribution

  • 5 Stars

     

    (2)

  • 4 Stars

     

    (1)

  • 3 Stars

     

    (0)

  • 2 Stars

     

    (0)

  • 1 Stars

     

    (1)

75%

of respondents would recommend this to a friend.

Pros

  • Easy to install (3)
  • Increases power (3)

Cons

No Cons

Best Uses

  • Everyday driving (3)

Reviewed by 4 customers

Displaying reviews 1-4

Back to top

(8 of 14 customers found this review helpful)

 
5.0

I world buy this product again

By 

from Lemmom, South Dakota

About Me Mechanic, Truck Enthusiast

Verified Buyer
Helpful Reviewer

Pros

  • Durable
  • Easy To Install
  • Improves Engine Efficiency
  • Increases Power

Cons

    Best Uses

    • Everyday Driving
    • Replacement

    Comments about Edelbrock Performer-Plus Camshaft Kit:

    I love this cam it gives me the power I need at the low end to pull havey loads where I need it the most for the work I do with my truck This cam and lifter set is the best for the money

    (7 of 15 customers found this review helpful)

     
    5.0

    Great cam

    By 

    from Melbourne, Fl.

    Verified Buyer
    Helpful Reviewer

    Pros

    • Easy To Install
    • Increases Power

    Cons

      Best Uses

      • Everyday Driving
      • Replacement
      • Restoration

      Comments about Edelbrock Performer-Plus Camshaft Kit:

      Used it in my classic with a SBC and it runs great.

      • Car & Truck:
      • Auto Enthusiast

      (10 of 18 customers found this review helpful)

       
      4.0

      cam specs

      By 

      from Jacksonville, NC

      Pros

      • Easy To Install
      • Increases Power

      Cons

        Best Uses

        • Everyday Driving

        Comments about Edelbrock Performer-Plus Camshaft Kit:

        Specs can be found at the manufacturer's website. That's where I went for the info and here's where I went to get the part locally.

        • Car & Truck:
        • Auto Enthusiast

        (8 of 23 customers found this review helpful)

         
        1.0

        specs???

        By 

        from Brookville In

        Pros

          Cons

            Best Uses

            • Performance Driving

            Comments about Edelbrock Performer-Plus Camshaft Kit:

            Where are the specs?? How can I know if this is the part I want?? Have to agree with Brad.

            Displaying reviews 1-4

            Back to top

            Do you have questions about this product?

             

            Ask a question, get answers from real customers and in-house experts. For further assistance, please review your support options on our Contact Us page.

            17 Questions | 20 Answers
            Displaying questions 1-10Previous | Next »
            • Q:

              What cam do I need for a slight rough idle. My engine is a 1983 Chevy 350.
              Asked on 11/19/2016 by Mark from ME

              1 answer

              • CUSTOMER CARE

                A:

                Hi Mark! To locate the exact camshaft kit, please provide us with the model and engine size of your 1983 Chevrolet.

                Answered on 11/22/2016 by Steve from AAP
            • Q:

              will this cam work with an edelbrok torker 2 model 5001 intake manifold on a 283 chevy small block
              Asked on 8/23/2015 by mike from bellwood pa

              1 answer

              • CUSTOMER CARE

                A:

                Hi Mike! This Edelbrock Performer-Plus Camshaft Kit (Part No. 2102) does not work fine with your Edelbrock Intake Manifold (Part No. 5001). We do offer Edelbrock Torker-Plus Camshaft Kit (Part No. 5002), which is an exact camshaft kit for your application.

                Answered on 8/24/2015 by Solomon
            • Q:

              Would this give my stock 78 z28 350 a ruff/loopy idle?
              Asked on 8/27/2013 by tr from Boston,MA

              1 answer

              • CUSTOMER CARE

                A:

                No, this Edelbrock Performer-Plus Camshaft Kit - part# 2102 are smooth idling cams for daily drivers, trucks, vans, RVs and 4x4s. You can expect a major improvement in throttle response and torque. For any further assistance, please feel free to call us at: 1-877-238-2623 or visit the nearest Advance Auto Parts store and one of our Parts Pros will gladly assist you with any questions or concerns you may have.

                Answered on 8/27/2013 by Vincent from AAP
            • Q:

              can i use this on my stock 78 z28 350?
              Asked on 4/17/2013 by tyler r from manchester,Nh

              1 answer

              • CUSTOMER CARE

                A:

                The Edelbrock Performer-Plus Camshaft Kit (Part No. 2102) fits your 1978 Chevrolet Camaro Z28 350. For any further assistance, please feel free to call us at: 1-877-238-2623 or visit the nearest Advance Auto Parts store and one of our Parts Pros will gladly assist you with any questions or concerns you may have.

                Answered on 4/17/2013 by Steve from AAP
            • Q:

              How much of a power increase can I expect when installing in a 1976 vette? Motors were only rated at 180 HP that year.
              Asked on 4/25/2012 by Anonymous from Waco, Texas

              1 answer

              • CUSTOMER CARE

                A:

                The complete vehicle package will determine how well your vehicle satisfies your performance preference. By complete vehicle package, means the interaction of all of a vehicle's components and subsystems, including the engine and its related parts (such as the carburetor, intake manifold, exhaust system, camshaft, and ignition), the transmission, rear-end gears, wheel and tire combinations and diameters, and suspension pieces. All of these components must work in unison to produce the desired performance results. Further, you will need to decide what RPM power range you will be operating in most often. Because camshaft selection, as well as carburetion, manifold choice, and gearing are based on it, knowing your rpm power range is the key to building a successful vehicle package. Be sure to purchase all of the components necessary to complete the desired vehicle package at your performance level. Remember, the further from stock you deviate in the engine department, the more modifications will be required elsewhere in the vehicle. Ensure that all of the components are correct before installation as improper installation may result in LOW MILEAGE, POOR PERFORMANCE, COSTLY REINSTALLATION AND EVEN ENGINE DAMAGE.
                For compatibility of this part Edelbrock Performer-Plus Camshaft Kit, Part No. 2102 manufactured by Edelbrock with your vehicle, please provide your vehicle make, model and engine specification.

                Answered on 4/27/2012 by Aaron from AAP
            • Q:

              yea will product fit a 1985 chevy with a 350 block
              Asked on 2/11/2011 by nb from gadsden al.

              1 answer

              • CUSTOMER CARE

                A:

                Yes.

                Answered on 4/25/2011 by David the Dynamite Parts Guy from AAP
            • Q:

              canyou tell me how much the kit weighs
              Asked on 2/2/2011 by Anonymous

              1 answer

              • CUSTOMER CARE

                A:

                This part weighs 13.2 pounds.

                Answered on 3/7/2011 by David the Dynamite Parts Guy from AAP
            • Q:

              I was looking at this cam for my chevy blazer and was wondering. Does Edelbrock make this cam to fit ford's?
              Asked on 11/2/2010 by Anonymous

              1 answer

              • CUSTOMER CARE

                A:

                I recommend checking out catalogs for your specific Ford application.

                Answered on 11/2/2010 by Mike the Auto Parts Master from AAP
            • Q:

              What are the specs.
              Asked on 6/18/2010 by Anonymous

              1 answer

              • CUSTOMER CARE

                A:

                Cam Style Hydraulic flat tappet
                Basic Operating RPM Range Idle-5,500
                Intake Duration at 050 inch Lift 204
                Exhaust Duration at 050 inch Lift 214
                Duration at 050 inch Lift 204 int./214 exh.
                Advertised Intake Duration 278
                Advertised Exhaust Duration 288
                Advertised Duration 278 int./288 exh.
                Intake Valve Lift with Factory Rocker Arm Ratio 0.420 in.
                Exhaust Valve Lift with Factory Rocker Arm Ratio 0.442 in.
                Valve Lift with Factory Rocker Arm Ratio 0.420 int./0.442 exh. lift
                Lobe Separation (degrees) 112
                Intake Valve Lash 0.000 in.
                Exhaust Valve Lash 0.000 in.
                Computer-Controlled Compatible No
                Lifters Included Yes
                Lifter Style Hydraulic flat tappet
                Valve Springs Included No
                Retainers Included No
                Locks Included No
                Valve Stem Seals Included No
                Timing Chain and Gears Included No
                Assembly Lubricant Included Yes
                Pushrods Included No
                Rocker Arms Included No
                Gaskets Included No

                Answered on 6/18/2010 by Mike from AAP
            • Q:

              Will this product fit my 2005 chevy 2500HD 6.0l? And if so about how much power incress am i looking at?
              Asked on 4/29/2010 by Miles from Texas

              2 answers

              • CUSTOMER CARE

                A:

                No, this is for small block Chevy engines.

                Answered on 4/29/2010 by Mike from AAP
              • A:

                There is no way of knowing about power gains! As they have failed to provide specs on that cam! You need to know the lift,duration,lobe separation to figure that out!

                Answered on 5/7/2010 by Bowerman Racing from Newfane, NY
            Displaying questions 1-10Previous | Next »

            Do you have a question about this product? 

            Check out the specials in our monthly flyer.
             
             
            Disclaimer We strive to keep all information accurate and up-to-date; however, product availability, pricing, promotions and store hours are subject to change without notice. Please contact Customer Care if you have any questions or corrections.