A/B Epoxy Putty
Hover over the image to zoom in
Share this:

Edelbrock A/B Epoxy Putty

Part No. 9290 Warranty Details  
Product Features:
  • Great For Intake Manifold
  • For Cylinder Head Port Module
  • Can Be Drilled
  • Can Be Tapped
  • Water and Gasoline-Proof
  • Easy To Use
Back To Top
Application:Intake Manifold/Cylinder Heads
Maximum Temperature:250
Solvent Resistant:Yes
Waterproof:Yes
Working Time:60 min

Do you have questions about this product?

 

Ask a question, get answers from real customers and in-house experts. For further assistance, please review your support options on our Contact Us page.

7 Questions | 7 Answers
Displaying questions 1-7
  • Q:

    Will this work with Methanol, or do I need to spray a coat of acrylic paint over to seal the edges to stop the Methanol from getting under the epoxy. Any tips for Methanol use would be welcome.
    Asked on 11/23/2014 by Malcolm from Australia

    1 answer

    • CUSTOMER CARE

      A:

      I'm glad to assist, Malcolm! I spoke to Edelbrock in regards to the A/B Epoxy Putty (Part No. 9290). I was informed that this epoxy would be able to resist methanol fuel without any additional preparation. If you have any additional questions, Edelbrock's contact information can be located here: http://www.edelbrock.com/automotive/misc/company/contact.shtml

      Answered on 12/4/2014 by Heath, ASE Parts Specialist from AAP
  • Q:

    Is this the same a Splash Zone A-788
    Asked on 11/23/2014 by Malcolm from Australia

    1 answer

    • CUSTOMER CARE

      A:

      Hi Malcolm, glad to assist you! The Edelbrock A/B Epoxy Putty can be used on intake manifold, cylinder head port module, can be drilled, can be tapped, water and gasoline-proof, easy to use.

      Answered on 11/28/2014 by Steve from AAP
  • Q:

    can it be used to seal around filler plug on differential
    Asked on 10/5/2013 by me from valdosta ga

    1 answer

    • CUSTOMER CARE

      A:

      Hi Me, this Edelbrock A/B Epoxy Putty - Part No. 9290 is a two-part bonding mold like putty, yet harden in one hour to a steel-like consistency. They don’t shrink and aren’t affected by solvents, oils, or gasoline. The maximum temperature they can withstand is 250 degrees F, which makes them perfect for repairing intake manifolds, cylinder head intake ports, heads, and blocks. They can be drilled and tapped when hard, adhere to almost any clean surface, and harden in 60 minutes at 75 degrees F. For any further assistance please feel free to call us at: 1-877-238-2623 or visit the nearest Advance Auto Parts store and one of our Parts Pros will gladly assist you with any questions or concerns you may have.

      Answered on 10/7/2013 by Max from AAP
  • Q:

    can this epoxy be used to fix a hole in the water jacket and exhaust pipe on a 97 sea doo???
    Asked on 7/13/2013 by tommy from penns grove nj

    1 answer

    • CUSTOMER CARE

      A:

      The Edelbrock A/B Epoxy Putty (Part No. 9290) can be used on intake manifold, cylinder head port module, can be drilled, can be tapped, water and gasoline-proof, easy to use. For any further assistance, please feel free to call us at: 1-877-238-2623 or visit the nearest Advance Auto Parts store and one of our Parts Pros will gladly assist you with any questions or concerns you may have.

      Answered on 7/14/2013 by Steve from AAP
  • Q:

    can this repair manifolds cracks
    Asked on 2/1/2013 by joseph

    1 answer

    • CUSTOMER CARE

      A:

      Yes, the Edelbrock A/B Epoxy Putty - part# 9290 may work to repair the cracks on your manifold. The maximum temperature they can withstand is 250 F. For any further assistance please feel free to call us at: 1-877-238-2623 or visit the nearest Advance Auto Parts store and one of our Parts Pros will gladly assist you with any questions or concerns you may have.

      Answered on 2/2/2013 by Max from AAP
  • Q:

    My Envoy has a leak where the manifold joins the block, can this product be used to fill that gap?
    Asked on 11/2/2012 by Jay from Fort Wayne, IN

    1 answer

    • CUSTOMER CARE

      A:

      Yes, this Edelbrock A/B Epoxy Putty - part# 9290 may work to fill the gap on your manifold. However, I would suggest you to find the cause for the leak and repair it by replacing the parts needed in order to avoid intermittence. For any further assistance, please visit your nearest Advance Auto store or call us directly at 1-877-ADVANCE (238-2623) and one of our representatives there would be more than happy to assist you.

      Answered on 11/5/2012 by Vincent from AAP
  • Q:

    can this be used to repair a small crack in the oil pan
    Asked on 10/4/2012 by rob from frackville, pa

    1 answer

    • CUSTOMER CARE

      A:

      Sorry, this Edelbrock A/B Epoxy Putty - part# 9290 does not work on cracked oil pan as it is for Intake Manifold/Cylinder Heads. For any further assistance, please visit your nearest Advance Auto store or call us directly at 1-877-ADVANCE (238-2623) and one of our representatives there would be more than happy to assist you.

      Answered on 10/4/2012 by Vincent from AAP
Displaying questions 1-7

Do you have a question about this product? 

Check out the specials in our monthly flyer.
 
 
Disclaimer We strive to keep all information accurate and up-to-date; however, product availability, pricing, promotions and store hours are subject to change without notice. Please contact Customer Care if you have any questions or corrections.