Bed Armor, DIY Truck Bed Liner, Black, 32 oz, Quart
Hover over the image to zoom in
Share this:

Duplicolor Bed Armor, DIY Truck Bed Liner, Black, 32 oz, Quart

Part No. BAQ2010 Warranty  
Dupli-Color Bed Armor; Do-It-Yourself Truck Bed Liner is a water-based, rubberized polyurethane coating. It is ideal for protecting truck beds, and all other metal, aluminum, fiberglass, and wood surfaces. This special formulation won't chip, fade, or flake and has a textured, black satin finish that provides the ultimate in truck bed protection. Product Features: Do-It-Yourself Truck Bed Liner, Easy To Use Water-Based Polyurethane Coating , Durable And Rubberized Finish Extends Bed Life, Impact Resistant Finish Won't Flake, Chip, Or Peel and can be used on Metal, Wood, Fiberglass, and Concrete., No Recoat Window, Allow To Cure 48 Hours Before Heavy-Duty Use, Use To Cut In Hard To Reach Areas Or For Touch Up
Back To Top
Abrasion Resistant:Yes
Additional Tools/Materials Required:Purchase with Bed Armor Kit
Aerosol:No
Application Method:Roll-In, Spray-In
Chemical Resistant:Yes
Color:BLACK
Coverage Area Per Container/Kit:18 sq ft
Drying/Curing Time:48 hours
Fade Resistant:Yes
Height:4.88 in
Impact Resistant:Yes
Install Kit Included:No
Installation Instructions Included:Yes
Liner Type:Roll-In, Spray-In
Liquid:Yes
Material:COATING
Universal:Yes
Width:4.25 in

REVIEW SNAPSHOT®

by PowerReviews
DuplicolorBed Armor, DIY Truck Bed Liner, Black, 32 oz, Quart
 
4.7

(based on 3 reviews)

Ratings Distribution

  • 5 Stars

     

    (2)

  • 4 Stars

     

    (1)

  • 3 Stars

     

    (0)

  • 2 Stars

     

    (0)

  • 1 Stars

     

    (0)

100%

of respondents would recommend this to a friend.

Pros

  • Durable (3)
  • Easy to install (3)

Cons

    Best Uses

        • Car & Truck:
        • Auto enthusiast (3), Truck enthusiast (3)

      Reviewed by 3 customers

      Sort by

      Displaying reviews 1-3

      Back to top

      (73 of 119 customers found this review helpful)

       
      4.0

      Works alot better than expected.

      By Darkwoods

      from Anderson South Carolina

      Pros

      • Attractive Design
      • Durable
      • Easy To Install

      Cons

        Best Uses

        • Customizing The Exterior
        • Everyday Driving
        • Racing
        • Replacement
        • Restoration

        Comments about Duplicolor Bed Armor, DIY Truck Bed Liner, Black, 32 oz, Quart:

        I used it on a 1968 Lincoln trunk,it had alot of rust and pitted spots throughout..I brushed it on instead of rolling it on,it went on thicker but only covered the floor of the trunk,so i may have to grab a gallon next time to do the interior,under carpets and fender area..
        I prepared the area with a wire brush on a drill,and used fiberglass long strand hair to fill in rust holes.It covered the area great,and seemed to also fill in the dents caused by years of rust.
        I like the fact it went on smoothly,unlike other products i seen that had grit,or a bumpy texture.
        The smoother texture looks great and almost made the trunk look like new.
        I hadnt seen any Cons about this product yet,I will get a gallon next time and finish the trunk and floor of the car.

        • Car & Truck:
        • Auto Enthusiast, Casual Driver, Mechanic, Truck Enthusiast

        Comment on this review(earn points)

        (91 of 138 customers found this review helpful)

         
        5.0

        good stuff

        By alfatim

        from ormond beach fla

        Verified Buyer
        Helpful Reviewer

        Pros

        • Drys fast
        • Durable
        • Easy To Install
        • Water clean up low odor

        Cons

        • None noted

        Best Uses

          Comments about Duplicolor Bed Armor, DIY Truck Bed Liner, Black, 32 oz, Quart:

          used it to protect /restore the bed on my golf /service cart

          • Car & Truck:
          • Auto Enthusiast, Mechanic, Truck Enthusiast

          Comment on this review(earn points)

          (79 of 121 customers found this review helpful)

           
          5.0

          Best product I've used.

          By USMC

          from Brandon, MS

          Helpful Reviewer

          Pros

          • Actually works as stated
          • Attractive Design
          • Durable
          • Easy To Install

          Cons

            Best Uses

            • Customizing The Exterior
            • Everyday Driving
            • Jeep floorboards
            • Replacement
            • Restoration

            Comments about Duplicolor Bed Armor, DIY Truck Bed Liner, Black, 32 oz, Quart:

            This is by far the best DIY bed liner material I've used so far. I'm in and out of my vehicle all the time: mud, sand, water, etc. and it takes the beating all of my Marines can give it. Definitely better than the Herculiner and others. Goes on much easier, very consistent, and doesn't dry out like other brands. If you want a little more texture, you can add fine sand to it and it goes on just the same! Definitely a MUST BUY if you're going to do this yourself!

            • Car & Truck:
            • Auto Enthusiast, Casual Driver, Jeep Wrangler, Truck Enthusiast

            Comment on this review(earn points)

            Displaying reviews 1-3

            Back to top

            Do you have questions about this product?(earn points for answers!)

             

            Ask a question, get answers from real customers and in-house experts. Or contact Customer Care by email or call 1-877-238-2623.

            20 Questions | 20 Answers
            Displaying questions 1-10Previous | Next »
            • Q:

              Can I put my 2 coats on, wait a year, then do 2 more? does this stuff have uv protection?
              Asked on 8/7/2014 by Tim from Berwick, Me.

              1 answer

              • CUSTOMER CARE

                A:

                Hi Tim, glad to assist you! The Duplicolor Bed Armor, DIY Truck Bed Liner is recommended 2-coats to all standard-sized 6 foot truck beds. Working from front to back, use the supplied roller and roller frame to apply a light first tack coat. Let the first coat dry for at least 1 hour or more before stepping back into the truck bed for second coat. Allow Bed Armor to dry for 2 hours before removing masking tape. Remember to pull masking tape away from fresh coating. A Bed Armor protected truck bed will be ready for light-duty use in 24 hours and heavy-duty use in 48 hours. For MSDS please use this link. URL - http://www.paintdocs.com/docs/webPDF.jsp?SITEID=DUPLI&prodno=026916844934&doctype=MSDS&lang=2

                Answered on 8/8/2014 by Steve from AAP
            • Q:

              can this be applied over rust to stop the rust and to seal the metal??
              Asked on 7/13/2014 by jimmie jammer from wisconsin

              1 answer

              • CUSTOMER CARE

                A:

                Hi Jimmie jammer, glad to assist you! This is a water-based, rubberized polyurethane coating. It is ideal for protecting truck beds, and all other metal, aluminum, fiberglass, and wood surfaces. Bed Armor is the only do-it-yourself truck bed liner formulated with DuPont Kevlar. This special formulation won't chip, fade, or flake and has a textured, black satin finish that provides the ultimate in truck bed protection. The Bed Armor Truck Bed Protection Kit include: (1) Bed Armor gallon, roller cover and frame, roller tray, trim brush, scuff pad, stir stick, step-by-step instruction booklet.

                Answered on 7/14/2014 by Steve from AAP
            • Q:

              What is the coldest working temperature for applying bed armor to bare medal?
              Asked on 12/19/2013 by Iceman from Alaska

              1 answer

              • CUSTOMER CARE

                A:

                Hi Iceman! Good question though, thanks for asking! I wouldn't suggest applying this product in temperatures below 50 degrees. It's best to apply it in warm/dry weather.

                Answered on 12/23/2013 by Morgan from AAP
            • Q:

              Can this product be put on in multiple coats within a certain amount of time, or is one thick coat recommended?
              Asked on 11/8/2013 by Jake from Orlando

              1 answer

              • CUSTOMER CARE

                A:

                That's a great question Jake, this Duplicolor Bed Armor, DIY Truck Bed Liner, Black, 32 oz, Quart - Part No. BAQ2010 is recommended 2-coats to all standard-sized 6 foot truck beds. Working from front to back, use the supplied roller and roller frame to apply a light first tack coat. Let the first coat dry for at least 1 hour or more before stepping back into the truck bed for second coat. Allow Bed Armor to dry for 2 hours before removing masking tape. Remember to pull masking tape away from fresh coating. A Bed Armor protected truck bed will be ready for light-duty use in 24 hours and heavy-duty use in 48 hours.

                Answered on 11/8/2013 by Morgan from AAP
            • Q:

              What is better to use a roller or brush?
              Asked on 11/4/2013 by Jim from Jackson, GA

              1 answer

              • CUSTOMER CARE

                A:

                Hi Jim, my answer to your question on the Duplicolor Bed Armor, DIY Truck Bed Liner, Black, 32 oz, Quart - Part No. BAQ2010 is that you can use both the roller and brush for your truck. The step by step instructions has been sent to your email address.

                Answered on 11/4/2013 by Morgan from AAP
            • Q:

              Doing a body-off restoration of a 1964 Triumph. Wondering if anyone has used bed armor as a body undercoating in place of rubberized undercoating in shaker cans. Seriously leaning towards undercoating the car with bed armor. Your thoughts?
              Asked on 9/10/2013 by Triumph Guy from South Dakota

              1 answer

              • CUSTOMER CARE

                A:

                Yes, the Duplicolor Bed Armor, DIY Truck Bed Liner, Black, 32 oz, Quart - part# BAQ2010 can be used as under body coating. For any further assistance, please feel free to call us at: 1-877-238-2623 or visit the nearest Advance Auto Parts store and one of our Parts Pros will gladly assist you with any questions or concerns you may have.

                Answered on 9/11/2013 by Vincent from AAP
            • Q:

              Can I use a quick drying hardner to speed up drying time?
              Asked on 7/30/2013 by Ray from Richland, Ms.

              1 answer

              • CUSTOMER CARE

                A:

                This Duplicolor Bed Armor, DIY Truck Bed Liner, Black, 32 oz, Quart - Part No. BAQ2010 does not require additional hardeners or activators to achieve maximum strength and durability. It would be dry within 48 hours. For any further assistance, please feel free to call us at: 1-877-238-2623 or visit the nearest Advance Auto Parts store and one of our Parts Pros will gladly assist you with any questions or concerns you may have.

                Answered on 7/31/2013 by Morgan from AAP
            • Q:

              will this product work on the underside of my alum. jon boat to help aid in scratches and dents?
              Asked on 8/23/2012 by bobby d from blanchard pa

              1 answer

              • CUSTOMER CARE

                A:

                This Duplicolor Bed Armor Qt (Part No. BAQ2010) is ideal for protecting truck beds, and all other metal, aluminum, fiberglass, and wood surfaces. For further assistance, please feel free to call us at 1-877-238-2623 or visit your nearest Advance Auto Parts store and one of our representatives would be more than happy to assist you.

                Answered on 8/23/2012 by Steve from AAP
            • Q:

              is this product compatible for the bottom of a aluminum boat and will it seal minor leaks
              Asked on 7/4/2012 by steve from maryland

              1 answer

              • CUSTOMER CARE

                A:

                Yes, this Duplicolor Bed Armor Qt - part# BAQ2010 should work fine for your application as it is a water-based, rubberized polyurethane coating. It is ideal for protecting truck beds, and all other metal, aluminum, fiberglass, and wood surfaces. For any further assistance, please visit your nearest Advance Auto store or call us directly at 1-877-ADVANCE (238-2623) and one of our representative there would be more than happy to assist you.

                Answered on 7/5/2012 by Vincent from AAP
            • Q:

              can this product be used in place of carpet on fiberglass boat?
              Asked on 3/1/2012 by Anonymous from pascagoula,ms.

              1 answer

              • CUSTOMER CARE

                A:

                Yes, this Duplicolor Bed Armor Qt with Part No. BAQ2010 can be used in place of carpet on fiberglass boat.

                Answered on 3/2/2012 by John the Car-Doc from AAP
            Displaying questions 1-10Previous | Next »

            Do you have a question about this product? 

            Create or view your online garage

            Check out the specials in our monthly flyer

             
             
            Disclaimer We strive to keep all information accurate and up-to-date; however, product availability, pricing, promotions and store hours are subject to change without notice. Please contact Customer Care if you have any questions or corrections.