Tapered Cone/Cup Wheel Bearing Set
Hover over the image to zoom in
Tapered Cone/Cup Wheel Bearing Set
Share this:

Driveworks Tapered Cone/Cup Wheel Bearing Set

Part No. S-A-35 Warranty  

See if this part fits a specific vehicle.

Check Vehicle Fit

Value-priced bearing meets all cataloged application requirements.
Back To Top
Bearing Inside Diameter:1.625 in
Bearing Outside Diameter:2.891 in
Bearing Width:0.77 in
Cone Radius:0.14 in
Cone Width:0.78 in
Cup Radius:0.031 in
Cup Width:0.58 in
Stand Out:0.19 in

Do you have questions about this product?(earn points for answers!)

 

Ask a question, get answers from real customers and in-house experts. Or contact Customer Care by email or call 1-877-238-2623.

10 Questions | 10 Answers
Displaying questions 1-10
  • Q:

    Is this for the front wheel to press into the hub?
    Asked on 9/14/2014 by tired of gm from falmouth, ky

    1 answer

    • CUSTOMER CARE

      A:

      Hi Tired of gm, To further assist with the S-A-35, please provide us the year, make, model and engine size of your vehicle.

      Answered on 9/16/2014 by Steve from AAP
  • Q:

    Can I replace just the wheel bearing in the front driverside using this or do I have to replace the entire hub assembly?
    Asked on 9/9/2014 by JR from Cobleskill, NY

    1 answer

    • CUSTOMER CARE

      A:

      Hi JR, glad to assist you! You can very well replace the bearing alone by pressing in to the stock wheel hub assembly.

      Answered on 9/10/2014 by Steve from AAP
  • Q:

    Why do you only have Bearing s for standard transmission and none for automatic
    Asked on 3/29/2013 by Sturp from Des Moines

    1 answer

    • CUSTOMER CARE

      A:

      In order to locate the exact wheel bearing set, please provide the year, make, model and engine size of your vehicle. For more information, please feel free to call us at: 1-877-238-2623 or visit the nearest Advance Auto Parts store and one of our Parts Pros will gladly assist you with any questions or concerns you may have.

      Answered on 3/29/2013 by Steve from AAP
  • Q:

    I need inner and outer front wheel bearing for my 1995 ford F150 2 wheel drive pickup with 5 speed manual trany will this work if not what will
    Asked on 5/5/2012 by fix its wife

    1 answer

    • CUSTOMER CARE

      A:

      This part Driveworks Tapered Cone/Cup Wheel Bearing Set, Part No. S-A-35 manufactured by Driveworks is for the Rear side of the vehicle. For compatibility of this part with your vehicle, please provide your vehicle sub-model and engine specification.
      For any further assistance, please feel free to call us at 1-877-238-2623 or visit your nearest Advance Auto Parts store and our representatives would be more than happy to assist you.

      Answered on 5/9/2012 by Aaron from AAP
  • Q:

    does this bearing fit 2 wheel dive
    Asked on 3/1/2012 by Andy from Jax.Fl.

    1 answer

    • CUSTOMER CARE

      A:

      To know the exact fit application, if you could please include the year make and model of the vehicle and we would be better able to assist you.

      Answered on 3/3/2012 by Dennis from AAP
  • Q:

    on website it says set of 2 is that inner and outer i bought online?
    Asked on 2/23/2012 by handiman from lawrenceburg,in

    1 answer

    • CUSTOMER CARE

      A:

      This Driveworks Tapered Cone/Cup Wheel Bearing Set Part number S-A-35 is for rear wheel drive inner comes in a quantity of two.

      Answered on 2/25/2012 by Steve from AAP
  • Q:

    Is this a wheel bearing or a transmission bearing
    Asked on 9/27/2011 by Anonymous

    1 answer

    • CUSTOMER CARE

      A:

      This is a front wheel bearing.

      Answered on 9/28/2011 by Dennis from AAP
  • Q:

    want to find cheapest way to fix drivers side rear and was wondering if i have to buy whole hub or can i get just the bearings and is there somewhere that shows how to do it
    Asked on 5/12/2011 by billie from omaha ne

    1 answer

    • CUSTOMER CARE

      A:

      Well this all depends on the skill level of whoever is removing or replacing the part. Some may have a harder time than others who have experience, so, I would recommend that you consult with your local mechanic.

      Answered on 6/14/2011 by Just Ask Jacob! from AAP
  • Q:

    If I would like to replace my rear wheel bearings on a 1999 Eclipse Spyder. would I be able to press these bearing into the old hub, or do I need to replace the whole housing?
    Asked on 5/7/2011 by Slinky from New Britain, CT

    1 answer

    • CUSTOMER CARE

      A:

      Rear wheel bearings can be pressed in to the stock wheel hub assembly.

      Answered on 5/18/2011 by DIY Daniel from AAP
  • Q:

    Does this require a press for R&R?
    Asked on 10/14/2010 by Deny from Staples, MN

    1 answer

    • CUSTOMER CARE

      A:

      Depends on your vehicle. For help with your project, I recommend getting a repair manual specifically for your vehicle. It should be able to help you with detailed instructions on how to do many things.

      Answered on 12/1/2010 by Mike the Auto Parts Master from AAP
Displaying questions 1-10

Do you have a question about this product? 

Create or view your online garage

Check out the specials in our monthly flyer

 
 
Disclaimer We strive to keep all information accurate and up-to-date; however, product availability, pricing, promotions and store hours are subject to change without notice. Please contact Customer Care if you have any questions or corrections.