Universal Fit C.V. Joint Boot Kit Outer greater than 3.58 Inch Diameter
Hover over the image to zoom in
Share this:

Dorman - OE Solutions Universal Fit C.V. Joint Boot Kit Outer greater than 3.58 Inch Diameter

Part No. 614-003 Warranty  

See if this part fits a specific vehicle.

Check Vehicle Fit

Our CV Joint Boots provide various methods of eliminating the removal of the CV joint during installation. Uni-Fit boots can be stretched over the CV Joint, Quick Boots come in halves that are joined by an adhesive weld compound, and Speedi Boots are split boots that are bolted together around the axle.

Product Features:
  • Save labor with easy installation methods
  • Comes with grease and bands
  • Rugged silicone or neoprene materials offer a high resistance to cracking, rotting and leaking
  • The Speedi and Quick Boot are installed without special tools
Back To Top
Clamp Quantity:2
Grease Type:Non-Synthetic
Joint End Inside Diameter:3.44
Material:Neoprene
Package Contents:CV Joint Boot, CV Joint Grease Pack, 2 Clamps
Shaft End Inside Diameter:0.98

REVIEW SNAPSHOT®

by PowerReviews
Dorman - OE SolutionsUniversal Fit C.V. Joint Boot Kit Outer greater than 3.58 Inch Diameter
 
2.2

(based on 6 reviews)

Ratings Distribution

  • 5 Stars

     

    (1)

  • 4 Stars

     

    (0)

  • 3 Stars

     

    (1)

  • 2 Stars

     

    (1)

  • 1 Stars

     

    (3)

20%

of respondents would recommend this to a friend.

Pros

    Cons

      Best Uses

      • Trucks (3)
        • Reviewer Profile:
        • Casual driver (4)
        • Was this a gift?:
        • No (6)

      Reviewed by 6 customers

      Sort by

      Displaying reviews 1-6

      Back to top

       
      1.0

      Published information is incorrect

      By Mike the biker

      from North Central, OH

      About Me Auto Enthusiast, Casual Driver

      Pros

      • None

      Cons

      • Incompatible

      Best Uses

      • Large Cars
      • Trucks

      Comments about Dorman - OE Solutions Universal Fit C.V. Joint Boot Kit Outer greater than 3.58 Inch Diameter:

      The published information for this boot is incorrect. This boot is for sizes 3.8" to 4.3". If you need a boot for 3.5" or smaller, you will need to use a 614-001 boot. The literature that comes with the boot is correct. All of the auto parts sites have the same wrong information. The boot is not quite as heavy duty as the OEM boot I took off but will probably work ok. I am giving this a poor rating because of the incorrect published information. This has caused me a considerable amount of needless hassle.

      • Was this a gift?:
      • No

      Comment on this review(earn points)

      (11 of 21 customers found this review helpful)

       
      3.0

      nice boot but a lot of work to install

      By Jef

      from Raeford NC

      About Me Casual Driver

      Verified Buyer
      Level 2

      Pros

      • Lightweight
      • Versatile

      Cons

      • Difficult To Use

      Best Uses

      • Trucks

      Comments about Dorman - OE Solutions Universal Fit C.V. Joint Boot Kit Outer greater than 3.58 Inch Diameter:

      Great product but way to hard to put on the CV joint without the advanced CV boot tools. I gave up and paid the extra money to have the whole CV axle replaced. in the past I have changed out the boots but for the Chevy it was a bit tougher than on my Eagle Talon.

      • Was this a gift?:
      • No

      Comment on this review(earn points)

      (13 of 22 customers found this review helpful)

       
      1.0

      Dont do it.

      By Mike

      from New york

      About Me Casual Driver

      Pros

      • Availability

      Cons

      • Difficult To Use
      • Not an exact fit

      Best Uses

      • None

      Comments about Dorman - OE Solutions Universal Fit C.V. Joint Boot Kit Outer greater than 3.58 Inch Diameter:

      This is a universal fit boot but it actually did not fit well at all. The drive shaft end fit well, but the cup side did not fit at all. The cup side had to be trimmed and the end was also ribbed instead of flat so I could not get the clamp on tight enough to keep the boot on. The clamps were flimsy and I had to go back to the store to get more after breaking the first one.

      • Was this a gift?:
      • No

      Comment on this review(earn points)

      (14 of 32 customers found this review helpful)

       
      5.0

      99 honda accord ex

      By Ed

      from Clearwater, Fl

      About Me Competitive Driver, Mechanic

      Pros

      • Durable
      • Easy To Use
      • High-Performance
      • Lightweight
      • Versatile

      Cons

        Best Uses

        • Large Cars
        • Small Cars
        • Trucks

        Comments about Dorman - OE Solutions Universal Fit C.V. Joint Boot Kit Outer greater than 3.58 Inch Diameter:

        This boot is great. I installed it on my Vtec Accord and has performed very well. I will be replacing the other outer boot as it is pretty worn out. I read the reviews about the clamps, if you have never used a clamp, it might be a good idea to read the instructions on there. It is easy to tighten with any type of pliers, just be carefull not to overtighten, and then snip the excess with a set of tin snips. You can tell the quality of the boot by comparing it to the others. You can tell it is very flexible and durable just by feeling the material it is made of. Ask the Sales rep at the store to show you both and you will definately go with the dorman, the other is a stiff plastic that seem will crack soon with the flex an outer boot performs at low and high speeds. Definately recomend and will continue to use.

        • Was this a gift?:
        • No

        Comment on this review(earn points)

        (20 of 37 customers found this review helpful)

         
        2.0

        you get what you pay for

        By Buick lover

        from Livonia, MI

        About Me Casual Driver

        Ask me a question

        Verified Buyer
        Level 3

        Pros

          Cons

          • Flimsy

          Best Uses

            Comments about Dorman - OE Solutions Universal Fit C.V. Joint Boot Kit Outer greater than 3.58 Inch Diameter:

            the boot fit good, but the clamps they give you with it are HORRIBLE!! They wont hold anything. They are very flimsy and cheap. We used different ones cause they wouldnt get tight enough.

            • Was this a gift?:
            • No

            Comment on this review(earn points)

            (20 of 37 customers found this review helpful)

             
            1.0

            Would not recommend

            By Max

            from Bartow Fla

            Pros

              Cons

              • Flimsy

              Best Uses

                Comments about Dorman - OE Solutions Universal Fit C.V. Joint Boot Kit Outer greater than 3.58 Inch Diameter:

                The clamps are flimsy the boot has to be cut to fit as is made to use on many different autos.My best advice is buy from the dealership or look for one that has good clamps and fit.

                • Car & Truck:
                • Mechanic
                • Was this a gift?:
                • No

                Comment on this review(earn points)

                Displaying reviews 1-6

                Back to top

                Do you have questions about this product?(earn points for answers!)

                 

                Ask a question, get answers from real customers and in-house experts. Or contact Customer Care by email or call 1-877-238-2623.

                10 Questions | 14 Answers
                Displaying questions 1-10
                • Q:

                  will this boot work for the front driveshaft of a 2000 ford ranger?
                  Asked on 3/29/2014 by chris from michigan

                  1 answer

                  • CUSTOMER CARE

                    A:

                    Hi Chris, glad to assist you! This part is an exact fit for the front driveshaft of your 2000 Ford Ranger.

                    Answered on 3/30/2014 by Steve from AAP
                • Q:

                  I'm looking to replace the front right outer cv axle boot on my car and I was wondering is there a universal cv boot kit that I can get or would it be better to just buy the OEM aftermarket boot kit and be done with it?
                  Asked on 7/3/2011 by Anonymous

                  2 answers

                  • CUSTOMER CARE

                    A:

                    In order to check the exact fit application, please provide the year, make, model and engine size of the vehicle.

                    Answered on 7/4/2011 by Vincent from AAP
                  • A:

                    Yea" they make what is called a split boot,no need to take anything apart. Just cut the old boot off and the new one comes in 2pcs, you put them togeather and you are done. cool! I just did my Buick and it tool about an hour.

                    Answered on 7/18/2011 by Salty from Browns Mills, New Jersey
                • Q:

                  on a 1997 camry does the shaft slip out of the trans axle or do you need a special tool to take it out. We have the outer boot on both sides that needs to be replace. or can you replace the outer boot just by removing the hub?
                  Asked on 3/26/2011 by Ted from Ky from Kentucky

                  1 answer

                  • CUSTOMER CARE

                    A:

                    For help with your project, I recommend purchasing a Haynes repair manual specifically for your vehicle. This should be able to assist you further into detail on how to repair or replace specific parts.

                    Answered on 3/28/2011 by David the Dynamite Parts Guy from AAP
                • Q:

                  could cv joint have same symptons as a transfer case malfunction
                  Asked on 2/7/2011 by Anonymous

                  1 answer

                  • CUSTOMER CARE

                    A:

                    Yes.

                    Answered on 5/18/2011 by Just Ask Jacob! from AAP
                • Q:

                  how do you fill the boot with fluid ?
                  Asked on 11/17/2010 by billy the kid from buffalo, n.y.

                  1 answer

                  • CUSTOMER CARE

                    A:

                    You fill the boot up with grease before installation or after if you have a grease gun.

                    Answered on 11/18/2010 by Mike the Auto Parts Master from AAP
                • Q:

                  (These boots are installed by slipping over the ends of the shaft, the actual joints will not have to be removed but the shaft will have to be taken out of the vehicle.) I read this and it does not make much sense. if it all slips over everything why does the shaft have to come out?
                  Asked on 11/1/2010 by jack the ripper from easton md

                  2 answers

                  • CUSTOMER CARE

                    A:

                    The ends of the shaft will have to be removed so that you can slip the boot on the end and move it to the correct position.

                    Answered on 11/1/2010 by Mike the Auto Parts Master from AAP
                  • A:

                    When you pull the shaft from the axle hub you will see three round balls ,look at the front of the shaft you will find a snap ring that has to be removed and the balls will come off. Then put black electric tape around the shaft this will keep from hurting the boot as you slide it on. Replace the balls and reinstall everything.

                    Answered on 7/18/2011 by salty from Browns Mills New Jersey
                • Q:

                  Don't you need a special tool to tighten the boot straps? If so what is a part number?
                  Asked on 9/15/2010 by Aggresive Al from Lawrenceville, Ga

                  2 answers

                  • CUSTOMER CARE

                    A:

                    Autocraft CV Boot Clamp Pliers
                    Part No. AC530/W83013

                    Answered on 9/16/2010 by Mike from AAP
                  • A:

                    Yes it is Autocraft CV Boot Clamp Pliers Part NO: AC530?W83013 O>K>

                    Answered on 7/18/2011 by salty from Browns Mills, New Jersey
                • Q:

                  how do you install these without removing the joint?
                  Asked on 3/31/2010 by Dan from San Juab, TX

                  2 answers

                  • CUSTOMER CARE

                    A:

                    These boots are installed by slipping over the ends of the shaft, the actual joints will not have to be removed but the shaft will have to be taken out of the vehicle.

                    Answered on 4/1/2010 by kevin from AAP
                  • A:

                    Dorman makes a special tool that works with this series of boot, it stretches the boot enough to pass over the joint without removing it. Dorman 614-030 about $120. Probably cheaper to take the joint off

                    Answered on 4/21/2010 by MadMikey from NH
                • Q:

                  does cv joint have to be taken out to replace boot.
                  Asked on 11/10/2009 by Anonymous

                  1 answer

                  • CUSTOMER CARE

                    A:

                    These boots are installed by slipping over the ends of the shaft, the actual joints will not have to be removed but the shaft will have to be taken out of the vehicle.

                    Answered on 1/6/2010 by Mike from Advance Auto Parts
                • Q:

                  do you need a spiecal tool to put this on
                  Asked on 11/2/2009 by Anonymous from saginaw ,michigan

                  1 answer

                  • CUSTOMER CARE

                    A:

                    In order to be more helpful in response to your question. We need specific information about your vehicle make, model, and year. If you happen to be near an Advance Auto Parts store, you can visit the store, or contact us at 1-877-ADVANCE. This way we can help you find the right part to fit your vehicle.

                    Answered on 11/16/2009 by Rob from Advance Auto Parts
                Displaying questions 1-10

                Do you have a question about this product? 

                Create or view your online garage

                Check out the specials in our monthly flyer

                 
                 
                Disclaimer We strive to keep all information accurate and up-to-date; however, product availability, pricing, promotions and store hours are subject to change without notice. Please contact Customer Care if you have any questions or corrections.