Rear Shackle Hanger
Hover over the image to zoom in
Share this:

Dorman - OE Solutions Rear Shackle Hanger

Part No. 722-010 Warranty  

See if this part fits a specific vehicle.

Check Vehicle Fit

Dorman’s Leaf Spring Hanger comes with all the components necessary for a complete repair. The mounting hardware provided ensures a trouble-free installation.

Product Features:
  • All parts are powder-coated for long lasting corrosion protection
  • Durable steel construction ensures a long life
  • Direct replacement for a proper fit every time
  • Leaf Spring Shackle and Bracket Kit also available from Dorman
Back To Top
Hardware Included:Yes
Material:Steel
Orientation:Rear
Spring Eye Bushing Included:No

REVIEW SNAPSHOT®

by PowerReviews
Dorman - OE SolutionsRear Shackle Hanger
 
4.7

(based on 12 reviews)

Ratings Distribution

  • 5 Stars

     

    (10)

  • 4 Stars

     

    (1)

  • 3 Stars

     

    (0)

  • 2 Stars

     

    (1)

  • 1 Stars

     

    (0)

90%

of respondents would recommend this to a friend.

Pros

  • Easy to use (7)
  • Durable (5)

Cons

    Best Uses

    • Trucks (7)
      • Reviewer Profile:
      • Auto enthusiast (3)
      • Was this a gift?:
      • No (9)

    Most Liked Positive Review

     

    Thank you Dorman!

    The rear spring hangers on my 2001 Ford Ranger truck were rusted away to almost nothing and VERY unsafe. I'm just glad that Dorman manufactures this part. I replaced the rear shackles at the...Read complete review

    The rear spring hangers on my 2001 Ford Ranger truck were rusted away to almost nothing and VERY unsafe. I'm just glad that Dorman manufactures this part. I replaced the rear shackles at the same time with Dorman shackles. The job was quite reasonable in price thanks to Dorman and Advance Auto. When installing I did find it was easier whenever possible to drill into the old rivet heads to make them much easier to cut off with a cold chisel. A couple of them were difficult to get at and I had to use an angle grinder on some. Thanks to these hangers it is now once again safe to haul a half ton load on my half ton truck!

    VS

    Most Liked Negative Review

     

    Parts fit but

    Parts fit fine, but on a 02 Ranger the back of the truck leans to the passenger side about 1 inch. There should be an adjustment or specific left and right versions. It...Read complete review

    Parts fit fine, but on a 02 Ranger the back of the truck leans to the passenger side about 1 inch. There should be an adjustment or specific left and right versions. It appears the left bracket is a good replacment bracket, the right bracket bolts on too high up on the frame. I might be able to drill new holes in the frame to correct the offset. I may just order the correct parts from Ford.

    Reviewed by 12 customers

    Sort by

    Displaying reviews 1-10

    Back to top

    Previous | Next »

     
    5.0

    Thank you Dorman!

    By ED

    from Lewistown, PA

    About Me Auto Enthusiast

    Ask me a question

    Level 3

    Pros

    • Durable
    • Easy To Use

    Cons

      Best Uses

      • Trucks

      Comments about Dorman - OE Solutions Rear Shackle Hanger:

      The rear spring hangers on my 2001 Ford Ranger truck were rusted away to almost nothing and VERY unsafe. I'm just glad that Dorman manufactures this part. I replaced the rear shackles at the same time with Dorman shackles. The job was quite reasonable in price thanks to Dorman and Advance Auto. When installing I did find it was easier whenever possible to drill into the old rivet heads to make them much easier to cut off with a cold chisel. A couple of them were difficult to get at and I had to use an angle grinder on some. Thanks to these hangers it is now once again safe to haul a half ton load on my half ton truck!

      • Was this a gift?:
      • No

      Comment on this review(earn points)

      (2 of 4 customers found this review helpful)

       
      5.0

      Excellent replacement

      By CJT

      from Akron, OH

      About Me Truck Enthusiast

      Level 1

      Pros

      • Durable
      • Easy To Use

      Cons

        Best Uses

        • Trucks

        Comments about Dorman - OE Solutions Rear Shackle Hanger:

        heavy duty construction makes this part feel and look durable enough even for the harsh winters of OH. Install went relatively easy and the fact that all the hardware needed to install the bracket comes with the kit really helps.

        • Was this a gift?:
        • No

        Comment on this review(earn points)

        (2 of 4 customers found this review helpful)

         
        5.0

        exact fit, moderately easy.

        By old sgt

        from Findlay, Ohio

        Verified Buyer
        Level 1

        Pros

          Cons

            Best Uses

            • Trucks

            Comments about Dorman - OE Solutions Rear Shackle Hanger:

            this a bit more difficult that the rear but, doable once you realize the original bushing can be removed with a drill and bit. also driver's side requires the dropping of gas tank and a moderate amount of grinding the rivets out (at least one 4" grinding wheel down to less than 3")

            • Was this a gift?:
            • No

            Comment on this review(earn points)

            (2 of 4 customers found this review helpful)

             
            4.0

            Good fit

            By mike

            from atco, nj

            About Me Auto Enthusiast

            Verified Buyer
            Level 2

            Pros

            • Durable
            • Easy To Use

            Cons

              Best Uses

              • Trucks

              Comments about Dorman - OE Solutions Rear Shackle Hanger:

              Fit good, lined right up, includes all bolts

              • Was this a gift?:
              • No

              Comment on this review(earn points)

              (2 of 4 customers found this review helpful)

               
              5.0

              Rear Shackle Hanger

              By Mike

              from Wisconsin

              About Me Mechanic

              Verified Buyer
              Level 2

              Pros

              • Durable
              • Easy To Use

              Cons

                Best Uses

                  Comments about Dorman - OE Solutions Rear Shackle Hanger:

                  This worked and fit perfectly. The hardware was a nice touch and saved a trip to the hardware store. The old bracket is riveted to the frame and requires hammering/drilling/grinding to remove but I would suggest this anytime replacing the shackle as they weaken together

                  • Was this a gift?:
                  • No

                  Comment on this review(earn points)

                  (2 of 4 customers found this review helpful)

                   
                  5.0

                  93 ranger

                  By wvwoody

                  from Hilltop WV

                  About Me Casual Driver

                  Verified Buyer
                  Level 3

                  Pros

                  • Easy To Use

                  Cons

                    Best Uses

                    • Trucks

                    Comments about Dorman - OE Solutions Rear Shackle Hanger:

                    Fit my 93 ranger, just had to grind off the old hanger rivets to install, matched holes perfect.

                    • Was this a gift?:
                    • No

                    Comment on this review(earn points)

                    (3 of 5 customers found this review helpful)

                     
                    5.0

                    Easy as pie

                    By Rog

                    from Stanton, KY

                    About Me Auto Enthusiast, Casual Driver, Mechanic, Truck Enthusiast

                    Verified Buyer
                    Helpful Reviewer

                    Pros

                    • Durable
                    • Easy To Use
                    • Lightweight

                    Cons

                      Best Uses

                      • Trucks

                      Comments about Dorman - OE Solutions Rear Shackle Hanger:

                      It was fairly easy to put on. The truck had a rusted one and had fell apart. After cleaning the frame it was really easy to put on. There was easy access and new bolts came with it so it went together easily.

                      • Was this a gift?:
                      • No

                      Comment on this review(earn points)

                      (2 of 3 customers found this review helpful)

                       
                      5.0

                      Nice piece ... just what we needed.

                      By Captain Comet

                      from Dunedin, FL

                      Verified Buyer
                      3 or more reviews submitted

                      Pros

                        Cons

                          Best Uses

                          • Trucks

                          Comments about Dorman - OE Solutions Rear Shackle Hanger:

                          Road salt had eaten the old ones away. We installed these without removing the bed, afraid that the bed bolts would be just as rusty. Angle grinder got rid of the old brackets and rivet heads. Punch the old rivets out of the frame. Be sure to install the shackle bolt from the outboard side, with the nut inside the hanger,in case you ever need to remove the shackle again. Due to locknuts included with the hanger, it is far easier for two guys to install these.

                          • Car & Truck:
                          • Casual Driver
                          • Was this a gift?:
                          • No

                          Comment on this review(earn points)

                          (2 of 4 customers found this review helpful)

                           
                          5.0

                          Perfect OEM replacement on 2000 Ranger

                          By DIY mechanic

                          from Springfield, OH

                          Helpful Reviewer

                          Pros

                          • Easy To Use

                          Cons

                            Best Uses

                              Comments about Dorman - OE Solutions Rear Shackle Hanger:

                              Both OEM hangers rusted in half so that the leaf springs were pushing against the bed. Removed the bed and ground off the rivets with a right angle grinder. These hangers bolted right up without any modification.

                              • Car & Truck:
                              • Casual Driver
                              • Was this a gift?:
                              • No

                              Comment on this review(earn points)

                              (1 of 3 customers found this review helpful)

                               
                              5.0

                              good product exact fit

                              By none

                              from muncy, pa

                              Verified Buyer
                              Level 1

                              Comments about Dorman - OE Solutions Rear Shackle Hanger:

                              good quality and great fit

                              Comment on this review(earn points)

                              Displaying reviews 1-10

                              Back to top

                              Previous | Next »

                              Do you have questions about this product?(earn points for answers!)

                               

                              Ask a question, get answers from real customers and in-house experts. Or contact Customer Care by email or call 1-877-238-2623.

                              12 Questions | 14 Answers
                              Displaying questions 1-10Previous | Next »
                              • Q:

                                Can a busted hanger cause the rear end or trans to shift hard or buck. Truck has been shifting hard in first and second gear. Already replaced speed sensor
                                Asked on 10/16/2012 by none from bloomington, in.

                                1 answer

                                • CUSTOMER CARE

                                  A:

                                  With reference to this Dorman - OE Solutions Rear Shackle Hanger - part# 722-010, the transmission control solenoid may be the possible cause of the problem on your vehicle. However, I would suggest taking your vehicle to a certified mechanic for a proper diagnosis before buying and having parts installed that may not (solve/be) the problem. For any further assistance, you may also visit your nearest Advance Auto store or call us directly at 1-877-ADVANCE (238-2623) and one of our representatives there would be more than happy to assist you.

                                  Answered on 10/16/2012 by Vincent from AAP
                              • Q:

                                I have a 2001 ford ranger, it's 4 wheel drive. will this fit for my truck?
                                Asked on 3/31/2012 by Anonymous

                                1 answer

                                • CUSTOMER CARE

                                  A:

                                  Yes, this Dorman - OE Solutions Rear Shackle Hanger (Part No. 722-010) fits your 2001 Ford Ranger.

                                  Answered on 3/31/2012 by Dennis from AAP
                              • Q:

                                I have a 1997 Ranger, this hanger is for the leaf spring rear driver side, do I need a shackle kit with this hanger? Or does the leaf spring bolt right to the hanger?
                                Asked on 2/16/2012 by Jim from Florissant, Mo

                                1 answer

                                • CUSTOMER CARE

                                  A:

                                  Yes, your need the shackle (part # 722-001) with this leaf spring hanger. The spring bolts to that and the other side of the shackle bolts to the hanger.

                                  Answered on 2/17/2012 by Dennis from AAP
                              • Q:

                                will it fit left and right side?
                                Asked on 9/13/2011 by Anonymous

                                1 answer

                                • CUSTOMER CARE

                                  A:

                                  This is a Rear Bracket Kit.
                                  Yes, it should fit left and right side.

                                  Answered on 9/13/2011 by Aaron from AAP
                              • Q:

                                is this hanger the same for both left rear and the right rear or are they side specific
                                Asked on 5/24/2011 by Anonymous

                                1 answer

                                • CUSTOMER CARE

                                  A:

                                  Yes, it will fit for both the rear driver side and rear passenger side.

                                  Answered on 5/25/2011 by DIY Daniel from AAP
                              • Q:

                                does this hanger work on the front of the leaf spring also. if not what part do i need. 1994 ford ranger supercab with the 4.0l 5 speed stick.
                                Asked on 12/19/2010 by Anonymous

                                1 answer

                                • CUSTOMER CARE

                                  A:

                                  This only fits for the rear. 722-011 is the part for the front for your vehicle.

                                  Answered on 12/20/2010 by Anonymous
                              • Q:

                                is the hanger different for the front and rear of the sprinng or does this hanger work for both ends with the addition of a shackle in the rear?
                                Asked on 9/7/2010 by Anonymous

                                1 answer

                                • CUSTOMER CARE

                                  A:

                                  To further assist you on this question could you provide the vehicle's year, make, model, and engine size.

                                  Answered on 9/7/2010 by Kevin from AAP
                              • Q:

                                I need the hanger for the front of the rear for a 1997 ford ranger where can I find it
                                Asked on 7/15/2010 by Anonymous

                                1 answer

                                • A:

                                  RockAuto.com

                                  Answered on 7/17/2010 by D_town from Pittsburgh, Pa
                              • Q:

                                where can I find the hanger for the front of the leaf spring
                                Asked on 7/14/2010 by Anonymous

                                1 answer

                                • CUSTOMER CARE

                                  A:

                                  To further assist you on this question could you please provide your vehicles year, make model, and engine size.

                                  Answered on 7/14/2010 by Kevin from AAP
                              • Q:

                                What is the best way to releive pressure from spring when replacing? Just don't know what to expect when removing old part.
                                Asked on 6/30/2010 by Youngblood

                                2 answers

                                • CUSTOMER CARE

                                  A:

                                  For step by step instructions i recommend that you go to your nearest Advance Auto Parts store and purchase a repair manual.

                                  Answered on 6/30/2010 by Kevin from AAP
                                • A:

                                  Jack the truck up with a floor-jack (or sizzor-jack) at the frame. If the spring has been wedged into the bed of the truck, go to the top and beat it loose with a hammer to come out. When the truck is jacked up to the mounting height there is no pressure on the spring. Use the jack to adjust the height/level to align the bolt holes.

                                  Answered on 2/19/2011 by Dr. G, Outta KC from Kansas City, MO
                              Displaying questions 1-10Previous | Next »

                              Do you have a question about this product? 

                              Create or view your online garage

                              Check out the specials in our monthly flyer

                               
                               
                              Disclaimer We strive to keep all information accurate and up-to-date; however, product availability, pricing, promotions and store hours are subject to change without notice. Please contact Customer Care if you have any questions or corrections.