Engine Heater Hose Assembly
Hover over the image to zoom in
Share this:

Dorman - OE Solutions Engine Heater Hose Assembly

Part No. 626-307 Warranty Details  

See if this part fits a specific vehicle.

Check Vehicle Fit

Our HVAC Heater Hose Connector resists brittleness, cracking, and leaking. Made of high-quality steel, it weathers extreme temperatures from the engines coolant.

Product Features:
  • Direct replacement for ease of installation
  • Replace only the connector, not the entire Heater Hose assembly
  • Also available as part of Dorman’s Installer Tech Tray
  • Fits a wide variety of applications
Back To Top
Clamps Included:Yes
Color:Natural/No Finish
End 1 Attachment Type:Hose
End 1 Inside Diameter:.58 in
End 1 Outside Diameter:.91
End 2 Attachment Type:Hose
End 2 Inside Diameter:.58 in
End 2 Outside Diameter:.91
End 3 Attachment Type:Hose
End 3 Inside Diameter:.58 in
End 3 Outside Diameter:.91
Heat Shield Included:No
Hose Type:Branched
Material:Rubber/plastic
Maximum Working Pressure:100 PSI
Overall Length:17 in
Protective Sleeve Attached:Yes
SAE:J20
Thermostatically Controlled:No

REVIEW SNAPSHOT®

by PowerReviews
Dorman - OE SolutionsEngine Heater Hose Assembly
 
3.8

(based on 6 reviews)

Ratings Distribution

  • 5 Stars

     

    (2)

  • 4 Stars

     

    (2)

  • 3 Stars

     

    (1)

  • 2 Stars

     

    (1)

  • 1 Stars

     

    (0)

83%

of respondents would recommend this to a friend.

Pros

No Pros

Cons

No Cons

Best Uses

No Best Uses
    • Was this a gift?:
    • No (6)

Reviewed by 6 customers

Displaying reviews 1-6

Back to top

 
5.0

Awesome on line ordering. Great parts and service

By 

from NC

Verified Buyer

Comments about Dorman - OE Solutions Engine Heater Hose Assembly:

Great system of ordering parts. Right Part, right store, right price and great customer service!

  • Was this a gift?:
  • No
 
4.0

Seems like a decent quality part

By 

from Lima, OH

Verified Buyer

Comments about Dorman - OE Solutions Engine Heater Hose Assembly:

Ordered online and picked up in store. Saved about $30 with advance vs. any other store. It's seem like it was good quality. It fit perfectly and went on super easy. I can't speak to the longevity of it since it's only been on for 2 days but I would purchase again for sure. I also installed these same heater hoses on my brothers van about 4 months ago and he hasn't had an issue since. Overall I would say doorman products make a good replacement for OEM considering the price difference. I've not had any problems so far.

  • Was this a gift?:
  • No
 
5.0

Hoses fitted perfectly and was almost exact OEM.

By 

from Bronx, NY

Verified Buyer

Pros

  • Exact Fit

Cons

  • Cheap Bushing

Best Uses

    Comments about Dorman - OE Solutions Engine Heater Hose Assembly:

    Product well built and fit perfectly. Plastic bushing on hose and had to figure out what role it played on the radiator hose but all was well.

    • Was this a gift?:
    • No
     
    3.0

    It is what it is

    By 

    from Myrtle Beach, SC

    See all my reviews

    Verified Buyer

    Comments about Dorman - OE Solutions Engine Heater Hose Assembly:

    The part was easy to install but the plastic that is made out of you can expect to change out again. I would like to see them make the Y connection out of aluminum or something like that instead of plastic.

    • Was this a gift?:
    • No

    (1 of 1 customers found this review helpful)

     
    2.0

    Fun with Hoses

    By 

    from Orland Park, IL

    Verified Buyer

    Pros

    • Hoses Fit 1st Time

    Cons

    • Cant Buy Just Supply Hose
    • Started Leaking After 4wk

    Best Uses

    • Oe Leaked These Leaked

    Comments about Dorman - OE Solutions Engine Heater Hose Assembly:

    Purchased these because they were the only ones in stock. I only needed the supply hose, but it is not available that way from this vendor. There are @ 7 clamps holding all this together where the OE only had 3 clamps. A lot more chances for a leak. After 4 weeks of driving, the hose started leaking under the protective plastic cover. Not too happy with product.

    • Was this a gift?:
    • No

    (2 of 2 customers found this review helpful)

     
    4.0

    Same quality as the OE.

    By 

    from Rock Hill, SC

    Verified Buyer

    Pros

    • Same Configuration As Oe

    Cons

    • Didn't Need Both Hoses

    Best Uses

      Comments about Dorman - OE Solutions Engine Heater Hose Assembly:

      Very good product! Same clamps and configuration as the original. The only down side is I couldn't purchase the "y" connector by itself and had to purchase both heater hose assemblies instead of the one I needed. Other than that awesome product!

      • Was this a gift?:
      • No

      Displaying reviews 1-6

      Back to top

      Do you have questions about this product?

       

      Ask a question, get answers from real customers and in-house experts. For further assistance, please review your support options on our Contact Us page.

      1 Question | 1 Answer
      Displaying question 1
      • Q:

        What is the best tool to use to replace the heater hose assembly?
        Asked on 11/4/2014 by Diana from United States

        1 answer

        • CUSTOMER CARE

          A:

          I'm glad to help, Diana! These are clamp on hoses and one port is a quick disconnect. The clamps can be removed and installed with just a pair of pliers. The quick connect side just snaps on and requires a disconnect tool to remove it.

          Answered on 11/5/2014 by Solomon
      Displaying question 1

      Do you have a question about this product? 

      Check out the specials in our monthly flyer.
       
       
      Disclaimer We strive to keep all information accurate and up-to-date; however, product availability, pricing, promotions and store hours are subject to change without notice. Please contact Customer Care if you have any questions or corrections.