C.V. Joint Solvent Welded Split Boot Kit Outer
Hover over the image to zoom in
Share this:

Dorman - OE Solutions C.V. Joint Solvent Welded Split Boot Kit Outer

Part No. 614-531 Warranty  

See if this part fits a specific vehicle.

Check Vehicle Fit

Our CV Joint Boots provide various methods of eliminating the removal of the CV joint during installation. Uni-Fit boots can be stretched over the CV Joint, Quick Boots come in halves that are joined by an adhesive weld compound, and Speedi Boots are split boots that are bolted together around the axle.

Product Features:
  • Save labor with easy installation methods
  • Comes with grease and bands
  • Rugged silicone or neoprene materials offer a high resistance to cracking, rotting and leaking
  • The Speedi and Quick Boot are installed without special tools
Back To Top
Clamp Quantity:1
Grease Type:Non-Synthetic
Joint End Inside Diameter:3.31
Material:Polyurethane
Package Contents:CV Boot Halves, Grease,Wedge Adaptor Halves, Solve
Shaft End Inside Diameter:0.79

REVIEW SNAPSHOT®

by PowerReviews
Dorman - OE SolutionsC.V. Joint Solvent Welded Split Boot Kit Outer
 
2.2

(based on 5 reviews)

Ratings Distribution

  • 5 Stars

     

    (0)

  • 4 Stars

     

    (1)

  • 3 Stars

     

    (1)

  • 2 Stars

     

    (1)

  • 1 Stars

     

    (2)

25%

of respondents would recommend this to a friend.

Pros

    Cons

      Best Uses

      • Small cars (3)
        • Was this a gift?:
        • No (4)

      Reviewed by 5 customers

      Sort by

      Displaying reviews 1-5

      Back to top

       
      1.0

      Not so good. Too big for Geo Tracker

      By Leebobagogo

      from Nantahala Gorge

      About Me Auto Enthusiast

      Ask me a question

      Level 2

      Pros

        Cons

          Best Uses

            Comments about Dorman - OE Solutions C.V. Joint Solvent Welded Split Boot Kit Outer:

            Got for a Geo Tracker. I think this would probably be okay if putting on a full size pickup. But hardly an exact fit for the geo tracker. The large end is much too large too get a snug fit on the cv housing.
            And the reason for doing this is because losing grease.
            Alos know that must glue one side together off the car and then wait one hour for it to set. Then put it on off the shaft and glue the second seam and let it sit for one hour before trying to put the bands on. In retrospect, I wish I had gone with a standard boot. Yeah there would have been more parts to take off, But I could have done it in about the same time since would not have waited on glue to set up. And one hour is if the temp is above 65 degrees. Even longer if cold out. Also note that these will NOT work on the inner boot.

            • Was this a gift?:
            • No

            Comment on this review(earn points)

            (1 of 1 customers found this review helpful)

             
            3.0

            Not too shabby

            By Frank the destroyer

            from Egg Harbor Township, NJ

            Ask me a question

            Level 2

            Pros

            • Durable
            • Easy To Use
            • Good For The Backyard Mec

            Cons

            • Bands Are Difficult But W
            • Just Enough Solvent

            Best Uses

            • Small Cars

            Comments about Dorman - OE Solutions C.V. Joint Solvent Welded Split Boot Kit Outer:

            Used this on the drivers side and after a year it is still holding up. Doing the passenger side now so installation should be much faster. Careful with the solvent. Use it sparingly unless they give you two tubes as in the photo.

            • Was this a gift?:
            • No

            Comment on this review(earn points)

            (0 of 1 customers found this review helpful)

             
            1.0

            Gave me the wrong product

            By alethea

            from baltimore, md

            About Me Casual Driver

            Verified Buyer
            Level 2

            Pros

              Cons

              • Difficult To Use
              • Incompatible

              Best Uses

                Comments about Dorman - OE Solutions C.V. Joint Solvent Welded Split Boot Kit Outer:

                wrong size boot, didn't find out until i tried to put it on my car and

                • Was this a gift?:
                • No

                Comment on this review(earn points)

                (2 of 2 customers found this review helpful)

                 
                4.0

                CV Boot

                By David

                from Sterling VA

                Verified Buyer
                3 or more reviews submitted

                Pros

                • Durable
                • Easy To Use
                • High-Performance
                • Lightweight
                • Versatile

                Cons

                  Best Uses

                  • Small Cars

                  Comments about Dorman - OE Solutions C.V. Joint Solvent Welded Split Boot Kit Outer:

                  It fit just fine. I have used them before and they work great. They are fairly easy to put on.

                  • Car & Truck:
                  • Auto Enthusiast, Casual Driver, Mechanic, Truck Enthusiast
                  • Was this a gift?:
                  • No

                  Comment on this review(earn points)

                  (3 of 4 customers found this review helpful)

                   
                  2.0

                  I would not buy this split blue c v boot

                  By Geno 1

                  from Orangeburg, S. C.

                  Verified Reviewer

                  Pros

                    Cons

                    • Difficult To Use
                    • Incompatible

                    Best Uses

                    • Small Cars

                    Comments about Dorman - OE Solutions C.V. Joint Solvent Welded Split Boot Kit Outer:

                    The tips at the end of the boot is not good for sealing. Also one split rubber boot is better than two..

                    • Car & Truck:
                    • Mechanic

                    Comment on this review(earn points)

                    Displaying reviews 1-5

                    Back to top

                    Do you have questions about this product?(earn points for answers!)

                     

                    Ask a question, get answers from real customers and in-house experts. Or contact Customer Care by email or call 1-877-238-2623.

                    4 Questions | 4 Answers
                    Displaying questions 1-4
                    • Q:

                      CAN THIS BE USED ON THE REAR INNER CV BOOTS; I CAN NOT SEEM TO FOUND CV INNER BOOTS FOR USE ON 1991 Mitsubishi Galant VR-4 Sedan 4-Door 2.0L 1997CC 122Cu. In. l4 GAS DOHC Turbocharged.
                      I WAS TOLD TO REPLACE THE HALF SHAFT AXLE ASSEMBLIES AS IT WAS COST EFFECTIVE, BUT I CAN NOT FIND ANY HALF SHAFT ASSEMBLIES FOR MY MODEL EVERYTHING STATES FOR THE FRONT ONLY.
                      Asked on 1/31/2014 by GEO from United States

                      1 answer

                      • CUSTOMER CARE

                        A:

                        Hi Geo, glad to assist you! The exact inner cv boot kit and half shaft assembly for your vehicle is currently unavailable online. I would suggest you to visit the nearest Advance Auto Parts store to check the availability for this part.

                        Answered on 2/2/2014 by Steve from AAP
                    • Q:

                      What exactly does the CV Joint Boot do? Does it help or fix the CV joints problem; for example my Voyager shakes really bad at around 50 mph. It needs balancing and all but its only when you press on the gas.
                      Asked on 12/16/2010 by Anonymous from Guston, KY

                      1 answer

                      • CUSTOMER CARE

                        A:

                        The boot keeps the grease on the actual joints to help lubricate them and keep all the dirt and debris out.

                        Answered on 12/17/2010 by Mike the Auto Parts Master from AAP
                    • Q:

                      why is it that it is allways out of stock
                      Asked on 7/14/2010 by Anonymous

                      1 answer

                      • CUSTOMER CARE

                        A:

                        Unfortunately with some items, it is hard to keep them in stock because of the demand and the supply available.

                        Answered on 7/14/2010 by Mike from AAP
                    • Q:

                      will this boot fit my 2006 hyuinda sonota lx
                      Asked on 10/16/2009 by Anonymous

                      1 answer

                      • CUSTOMER CARE

                        A:

                        To verify that this part fits your vehicle you can go online at advanceautoparts.com and input the year, make and model of the vehicle to confirm that the part does fit your vehicle

                        Answered on 10/16/2009 by David from Advanced Auto Parts
                    Displaying questions 1-4

                    Do you have a question about this product? 

                    Create or view your online garage

                    Check out the specials in our monthly flyer

                     
                     
                    Disclaimer We strive to keep all information accurate and up-to-date; however, product availability, pricing, promotions and store hours are subject to change without notice. Please contact Customer Care if you have any questions or corrections.