Electrical Sockets - 3-Wire/Terminal Seal Beam Lamp 4002 & 4005 Bulb
Hover over the image to zoom in
Electrical Sockets - 3-Wire/Terminal Seal Beam Lamp 4002 & 4005 Bulb Electrical Sockets - 3-Wire/Terminal Seal Beam Lamp 4002 & 4005 Bulb
Share this:

Dorman - Conduct-Tite Electrical Sockets - 3-Wire/Terminal Seal Beam Lamp 4002 & 4005 Bulb

Part No. 85810 Warranty Details  

See if this part fits a specific vehicle.

Check Vehicle Fit

We offer a comprehensive line of Headlamp Sockets for almost any automotive electrical repair. All our Headlamp Sockets are constructed of high-quality materials for long-lasting durability.

Product Features:
  • Available in many different wire configurations including 1-, 2-, and 3-wire
  • A large selection available to support a variety of bulbs, including H7, 9005, 9006 and more
  • Durably designed for a long service life
  • Also suitable for a broad range of industrial and commercial uses
Back To Top
Connector Type:Socket
Material:Plastic
Overall Length:10.5 In. w/Wire (2 In. W/O)
Package Quantity:1
Terminal Gender:Female
Terminal Material:Plastic
Water Resistant:No
Wire Pigtail Included:Yes
Wire Quantity:3

REVIEW SNAPSHOT®

by PowerReviews
Dorman - Conduct-TiteElectrical Sockets - 3-Wire/Terminal Seal Beam Lamp 4002 & 4005 Bulb
 
4.5

(based on 2 reviews)

Ratings Distribution

  • 5 Stars

     

    (1)

  • 4 Stars

     

    (1)

  • 3 Stars

     

    (0)

  • 2 Stars

     

    (0)

  • 1 Stars

     

    (0)

Reviewed by 2 customers

Displaying reviews 1-2

Back to top

 
4.0

Product worked just fine, as expected!

By 

from Michigan

About Me Auto Enthusiast

See all my reviews

Verified Buyer

Pros

  • Cost Effective
  • Easy To Install

Cons

    Best Uses

    • Replacement

    Comments about Dorman - Conduct-Tite Electrical Sockets - 3-Wire/Terminal Seal Beam Lamp 4002 & 4005 Bulb:

    worked great! now we can see in the dark again!

    Comment on this reviewHelp Icon

    (21 of 43 customers found this review helpful)

     
    5.0

    lamp sockets

    By 

    from benton, la

    About Me Auto Enthusiast, Casual Driver

    See all my reviews

    Ask me a question

    Verified Buyer
    3 or more reviews submitted

    Pros

    • Easy To Install
    • Intuitive Controls

    Cons

      Best Uses

      • Replacement

      Comments about Dorman - Conduct-Tite Electrical Sockets - 3-Wire/Terminal Seal Beam Lamp 4002 & 4005 Bulb:

      easy to install

      Comment on this reviewHelp Icon

      Displaying reviews 1-2

      Back to top

      Do you have questions about this product?

       

      Ask a question, get answers from real customers and in-house experts. For further assistance, please review your support options on our Contact Us page.

      6 Questions | 7 Answers
      Displaying questions 1-6
      • Q:

        How do I install this?
        Asked on 1/11/2015 by John from Bensalem

        1 answer

        • CUSTOMER CARE

          A:

          I'm glad to help, John! You would hold the new and old headlight pigtail facing the same position. Then, wire it one wire at a time from the same position.

          Answered on 1/12/2015 by Solomon
      • Q:

        Hello, I am looking to replace the OEM socket on my 2002 Subaru Forester. My car takes a Sylvania 9003 bulb. The OEM socket has tabs you have to squeeze to remove the socket from the bulb. In the pictures and description I cannot tell if the Dorman socket operates the same way. Does this socket have the retaining tabs?
        Asked on 12/3/2014 by Ron from WV

        1 answer

        • CUSTOMER CARE

          A:

          Hi Ron, glad to assist you! This part #85810 does not have locking tabs. The only other socket we offer for your 2002 Subaru Forester is #84790. I do not see locking tabs on that one either.

          Answered on 12/9/2014 by Solomon
      • Q:

        I have a 1999 Toyota solara with a V6. My drivers side headlight works only on high beam and not the low beam. I checked the fuels and it is ok, not blown. I was recommended changing the headlight socket because it might be loose wire connected or something. The socket I purchased at the store have 3 wires and on my 99 solara have 4 wires......How can I make this socket work without causing any further problem?
        Asked on 11/6/2013 by Rome

        1 answer

        • CUSTOMER CARE

          A:

          Hi Rome, my answer to your question on the Dorman - Conduct-Tite Electrical Sockets - 3-Wire/Terminal Seal Beam Lamp 4002 & 4005 Bulb - Part No. 85810 is that you cannot adapt it to a 4 wire system. In order to locate the correct socket, please provide the bulb number that you want to replace in your 1999 Toyota Solara.

          Answered on 11/7/2013 by Morgan from AAP
      • Q:

        in what order does the cables go, i spliced my old socket, and connected the wires but headlight didn't go on. i tried various ways but nothing work worked
        Asked on 6/26/2013 by Henry from md

        2 answers

        • CUSTOMER CARE

          A:

          This Dorman - Conduct-Tite Electrical Sockets - 3-Wire/Terminal Seal Beam Lamp 4002 & 4005 Bulb - Part No. 85810 does not require wire splicing. However, without the presence of your vehicle we would not be able to properly diagnose it nor provide you with a 100% answer. We would suggest that you take your vehicle to a certified mechanic for further diagnosis. For any further assistance, please feel free to call us at: 1-877-238-2623 or visit the nearest Advance Auto Parts store and one of our Parts Pros will gladly assist you with any questions or concerns you may have.

          Answered on 6/26/2013 by Morgan from AAP
        • A:

          Despite what the other answer says, this part does require splicing. If you disconnected the wires from the original in such a way that you now do not know how they go on the new one, hopefully the colors of the wires match the other side and you can use it as a guide to assemble the new part. If the wire colors do not match, you will have to find a schematic for your specific make/model/year car that tells what color wires go where, or find someone else with the same make/model/year car to look at. If you have successfully spliced in the new part correctly per the above guidance and the bulb still does not illuminate, then the problem may be elsewhere. The bulb could be bad, or the wiring somewhere. Some cars have independent fuses for both headlights, so it could be a blown fuse. If you are unable to track down the problem using a multimeter on your own at this point, professional assistance would be advised.

          Answered on 7/5/2014 by Chris from Maryland
      • Q:

        If my wires are good and only need to replace the socket can I connect the existing wires to the connector without splicing?
        Asked on 5/21/2012 by Anonymous

        1 answer

        • CUSTOMER CARE

          A:

          Yes, wire splicing is not necessary with this Dorman - Conduct-Tite Electrical Sockets - 3-Wire/Terminal Seal Beam Lamp 4002 & 4005 Bulb (Part No. 85810). For any further assistance please feel free to call 1-877-238-2623 and one of our representatives will gladly assist you with any questions or concerns you may have.

          Answered on 5/22/2012 by John the Car-Doc from AAP
      • Q:

        is this for the head lamp ?
        Asked on 3/3/2012 by Anonymous from hendersonville tn

        1 answer

        • CUSTOMER CARE

          A:

          Yes, this is a headlamp socket. In order to check the exact fit application, please provide the year, make, model and engine size of the vehicle and we would be better able to assist you.

          Answered on 3/5/2012 by Steve from AAP
      Displaying questions 1-6

      Do you have a question about this product? 

      Check out the specials in our monthly flyer.
       
       
      Disclaimer We strive to keep all information accurate and up-to-date; however, product availability, pricing, promotions and store hours are subject to change without notice. Please contact Customer Care if you have any questions or corrections.