Class 4 Trailer Hitch
Hover over the image to zoom in
Share this:

Curt Class 4 Trailer Hitch

Part No. 14361 Warranty Details  

See if this part fits a specific vehicle.

Check Vehicle Fit

When an especially bulky trailer or heavy load requires more towing power, class 4 steps in to take the reins. CURT class 4 trailer hitches are made with all-American steel and a powerful design. They are commonly found on commercial vans and larger pickup trucks and SUVs. This particular class 4 trailer hitch boasts a gross trailer weight capacity of up to 10,000 lbs. and a tongue weight capacity of 1,000 lbs., giving it the raw towing power needed to tow most campers, boat trailers, car haulers and large utility trailers, as well as a winch mount or cargo carrier. It is designed specifically to be a custom-fit trailer hitch for certain years of the Dodge Ram 1500, 2500 or 3500 (to verify your vehicle compatibility, see the CURT application guide at curtmfg.com).This class 4 features a square tube frame and comes with all necessary hardware for a complete installation on your vehicle. Also, like many class 3 hitches, this class 4 hitch can be used in combination with a weight distribution hitch to increase its overall towing capacity. With a weight distribution system attached, the gross trailer weight capacity increases up to 12,000 lbs. and the tongue weight capacity up to 1,200 lbs. (NOTE: Never exceed the lowest weight capacity of any towing component).Class 4 hitches can accept any ball mount or hitch-mounted accessory with a 2" x 2" shank. Like all CURT trailer hitches, our class 4 line goes through a strenuous finishing process, receiving a shot blast and wash to create a flawlessly smooth surface, and then being co-cured with two finishing coats. A liquid Bonderite coating and gloss black powder coat finish ensure that the hitch stays well protected against rust, chipping and UV damage. This co-cured finish is backed by a one-year warranty, while the hitch as a whole comes with a limited lifetime warranty.

Product Features:
  • Made with a vehicle-specific design for a custom fit
  • Tested for safety in accordance with SAE J684
  • Precisely welded for superior strength and fit
  • Protected by a durable high-gloss black powder coat finish
  • Co-cured in a rust-resistant liquid Bonderite coating
  • Strengthened with a forged, welded, seamless collar
  • Equipped with an open-back receiver for easy cleaning
  • Backed by a limited lifetime warranty
  • Made in USA
Back To Top
Attachment Location:Vehicle Frame or Bumper (Varies by Application)
Drilling Required:No
Hitch Class:IV
Maximum Gross Towing Weight Carrying:10000 lbs
Maximum Gross Towing Weight Distributing:12000 lbs
Maximum Tongue Weight Carrying:1000 lbs
Maximum Tongue Weight Distributing:1200 lbs
Mounting Hardware Included:Yes
Mounting Type:Bolt-On
Outlet Quantity:Powder Coat
Receiver Size:2 in
Type:Custom

REVIEW SNAPSHOT®

by PowerReviews
CurtClass 4 Trailer Hitch
 
4.5

(based on 2 reviews)

Ratings Distribution

  • 5 Stars

     

    (1)

  • 4 Stars

     

    (1)

  • 3 Stars

     

    (0)

  • 2 Stars

     

    (0)

  • 1 Stars

     

    (0)

Reviewed by 2 customers

Displaying reviews 1-2

Back to top

 
4.0

ALMOST perfect fit

By 

from central Georgia

About Me Auto Enthusiast, Competitive Driver, Mechanic, Truck Enthusiast

Verified Buyer

Pros

  • All parts included
  • Durable
  • Very Heavy Duty

Cons

    Best Uses

    • Trucks

    Comments about Curt Class 4 Trailer Hitch:

    The hitch arrived in great time. However, it was sold as a PERFECT FIT. I had to drill two half inch holes in the side panels to match my truck. Still, a great looking heavy duty hitch that was relatively easy to install even after having to do the additional work of drilling the holes.The instructions also did not mention that you have two factory brackets to remove from your truck that assist in keeping the bumper more stable. The attaching parts were all there and the end result is still a nice tow hitch. Just need to inform Curt that the holes do NOT match the truck holes.

    • Was this a gift?:
    • No

    Comment on this reviewHelp Icon

     
    5.0

    Class 4 Receiver Hitch

    By 

    from midlothian, Va

    About Me Mechanic, Truck Enthusiast

    Verified Buyer

    Pros

    • Durable
    • High-Performance

    Cons

      Best Uses

      • Trucks

      Comments about Curt Class 4 Trailer Hitch:

      Harder to install since I have dual exhaust. Real tight fit with tailpiped, but not impossible.

      perfect fit

      • Was this a gift?:
      • No

      Comment on this reviewHelp Icon

      Displaying reviews 1-2

      Back to top

      Check out the specials in our monthly flyer.
       
       
      Disclaimer We strive to keep all information accurate and up-to-date; however, product availability, pricing, promotions and store hours are subject to change without notice. Please contact Customer Care if you have any questions or corrections.