Class 3 Trailer Hitch
Hover over the image to zoom in
Share this:

Curt Class 3 Trailer Hitch

Part No. 13364 Warranty Details  

See if this part fits a specific vehicle.

Check Vehicle Fit

The CURT class 3 trailer hitch is the most common type of trailer hitch installed on full-size pickup trucks and SUVs. It is also found on full-size cars, crossover SUVs, minivans and mid-size trucks. That is because the class 3 packs the punch of a heavyweight hitch while still staying light on its feet. This CURT class 3 hitch offers a gross trailer weight capacity of 4,000 lbs. and a comparable tongue weight capacity of 400 lbs. It is designed to be a custom-fit trailer hitch for certain years of the Dodge Caravan with Stow-n-Go, Grand Caravan with Stow-n-Go, Ram Cargo Van, Chrysler Town and Country with Stow-n-Go or VW Routan (to verify your vehicle compatibility, see the CURT application guide at curtmfg.com).The 2" x 2" receiver tube opening of this class 3 hitch is able to accept a hitch-mounted accessory, such as a bike rack or cargo carrier, or a ball mount to tow most standard size trailers, including utility trailers, single-horse livestock trailers, boat trailers and large campers. One special feature about the class 3 that is not found in classes 1 or 2 is its compatibility with a weight distribution hitch. When used in combination with a WD hitch, this class 3's gross trailer weight capacity increases to 5,000 lbs. and the tongue weight capacity to 500 lbs. (NOTE: Never exceed the lowest weight capacity of any towing component).CURT class 3 trailer hitches are engineered to be strong and capable, having a quality steel frame and a solid finish. They are put through strenuous testing before being deemed ready for market and come with two coatings -- a liquid Bonderite coating and a powder coat in high-gloss black -- that cure together to form a strong resistance against rust, scratching, UV damage and other wear. Our hitches are our pride, and as such, we back them up with a limited lifetime warranty and a one-year finish warranty.

Product Features:
  • Made with a vehicle-specific design for a custom fit
  • Tested for safety in accordance with SAE J684
  • Precisely welded for superior strength and fit
  • Protected by a durable high-gloss black powder coat finish
  • Co-cured in a rust-resistant liquid Bonderite coating
  • Strengthened with a forged, welded, seamless collar
  • Equipped with an open-back receiver for easy cleaning
  • Backed by a limited lifetime warranty
  • Made in USA
Back To Top
Attachment Location:Vehicle Frame or Bumper (Varies by Application)
Drilling Required:No
Hitch Class:III
Maximum Gross Towing Weight Carrying:4000 lbs
Maximum Gross Towing Weight Distributing:5000 lbs
Maximum Tongue Weight Carrying:400 lbs
Maximum Tongue Weight Distributing:500 lbs
Mounting Hardware Included:Yes
Mounting Type:Bolt-On
Outlet Quantity:Powder Coat
Receiver Size:2 in
Type:Custom

REVIEW SNAPSHOT®

by PowerReviews
CurtClass 3 Trailer Hitch
 
3.0

(based on 2 reviews)

Ratings Distribution

  • 5 Stars

     

    (1)

  • 4 Stars

     

    (0)

  • 3 Stars

     

    (0)

  • 2 Stars

     

    (0)

  • 1 Stars

     

    (1)

Reviewed by 2 customers

Displaying reviews 1-2

Back to top

(2 of 2 customers found this review helpful)

 
1.0

Hitch should do what a hitch does

By 

from Kershaw County South Carolina

About Me Casual Driver

Verified Buyer

Pros

  • 14 Inch Steel Bent
  • Heavy
  • None

Cons

  • Looked Like Dropped 50 Ft

Best Uses

  • Scrap

Comments about Curt Class 3 Trailer Hitch:

Product look as if it had been dropped from a six story building. Left side bent about 10-15 degrees toward center. Customer service said they will replace it!

  • Was this a gift?:
  • No

Comment on this reviewHelp Icon

(2 of 2 customers found this review helpful)

 
5.0

Worth the effort!

By 

from Fenton, MO

About Me Casual Driver

See all my reviews

Verified Buyer

Pros

  • Durable
  • Easy To Use

Cons

    Best Uses

    • 2009 Ddg Grd Caravan 40

    Comments about Curt Class 3 Trailer Hitch:

    Be sure you evaluate what you can haul with whatever is behind the rear axle "tongue weight", including the weight of items behind rear seats plus the trailer on the hitch and don't forget to subtract from your capacity limit the 49 lbs of the receiver, #lbs for draw bar & ball. Review weight capacity placard and manual of vehicle / tire weight rating --it does matter--contact dealer or trailer specialist with any questions.
    Instructions were clear for most part with exception of which way to rotate the exhaust hanger and correct identification of bolt size and corresponding torque amount. The 1st part of manual correctly identifies the 15/18 mm bolts, but in the torque it talks about 10/12 mm bolts instead.

    • Was this a gift?:
    • No

    Comment on this reviewHelp Icon

    Displaying reviews 1-2

    Back to top

    Do you have questions about this product?

     

    Ask a question, get answers from real customers and in-house experts. For further assistance, please review your support options on our Contact Us page.

    1 Question | 3 Answers
    Displaying question 1
    • Q:

      I bought this curt 2" hitch and there were no bolts with the hitch. I have a 2010 dodge grand caravan sxt. What type and size bolt do I need for installation or were the bolts lost in shipping? The box did have a hole in it.
      Asked on 3/9/2012 by chad from alpena mi

      3 answers

      • CUSTOMER CARE

        A:

        This Curt Class 3 Receiver Hitch, 2" Part number 13364 should come with the mounting hardware. Sorry for the inconvenience caused. Please feel free to call 1-877-238-2623 and one of our representatives will gladly assist you with any questions or concerns you may have.

        Answered on 3/9/2012 by Steve from AAP
      • A:

        Normally there are bolts place under your car. There should be 2 on each side. If not you should have the place to put the bolts in. I know (NOT COMMERCIAL MEANT!) by ACA hardware they are selling bolt. They should be about 6-8 Inch. Do also NOT forget the washers. Ask for high quality and strong one for your hitch! succes Paul Endtimeharvestrevival@msn.co

        Answered on 9/12/2012 by Paul van Beek from Lakeland, FL
      • A:

        I just installed on my 09 DGC. The bolts are already in place on the bottom of van, so they likely are on yours too. I didn't need to lift the van to install, but it helped to have a friend to help position the hitch with a rolling floor jack and to wrangle the exhaust just right to get on the bolts with enough torque. Also, you'll likely find the install instructions wrapped up in hitch and Curt Mfg has also posted an awesome YouTube video as well, just search for the Curt part #.

        Answered on 10/28/2012 by MacOverAll from Fenton, MO
    Displaying question 1

    Do you have a question about this product? 

    Check out the specials in our monthly flyer.
     
     
    Disclaimer We strive to keep all information accurate and up-to-date; however, product availability, pricing, promotions and store hours are subject to change without notice. Please contact Customer Care if you have any questions or corrections.