-
Your Store:
-
| Container/Package Size: | 16 oz |
| Container/Package Type: | Aerosol |
| Container/Package Weight: | 0.26 lb |
| Corrosion Resistant: | No |
| Flammable: | Yes |
| Material: | Liquid |
| Non- Chlorinated: | Yes |
| Tube Included: | Yes |
| Zero VOC (Volatile Organic Compounds): | No |
REVIEW SNAPSHOT®
by PowerReviewsPros
Cons
Best Uses
REVIEWS
Reviewed by 8 customers
Sort by
Displaying reviews 1-8
Comments about CRC QD Electronic Cleaner:
Good stuff! I like it! It's kinda like everything that's nice.
Pros
Cons
Best Uses
Comments about CRC QD Electronic Cleaner:
good product wish it was cheaper, works better than a wire brush though sometimes the combination works best depending on how corroded things are, use it on any thing you are going to put dielectric grease on before hand, safe on electrical sensors. works to get rid of the crud produced on battery terminals, seems to stop corrosion so long as you put dielectric grease on after use
Pros
Cons
Best Uses
Comments about CRC QD Electronic Cleaner:
I use this product to clean the cable connectos in my Volvo 240. When the connectos gets some green corrosion, this will help up. Simply spray over the affected area, clean with a brush (if it is too much) and that's all!
Pros
Cons
Best Uses
Comments about CRC QD Electronic Cleaner:
The Advance Auto I shop usually have the product I'm looking for.
Pros
Cons
Best Uses
Comments about CRC QD Electronic Cleaner:
this stuff works really well i used it on my trailer wireing connected and it cleaned it right up. i also used it on my headphone jack on my phone and it cleaned that out and made it work like new no more crackling and nonworking headphones
you can also use a little sand paper before this to lossen up corrosicn on the contacts
Pros
Cons
Best Uses
Comments about CRC QD Electronic Cleaner:
comparable to electraclean . can capacity is 11oz not 16 as listed on website at time of my order!
Comments about CRC QD Electronic Cleaner:
It's pretty effective for electronic cleaning. Straight alcohol works too and is a little cheaper.
Pros
Cons
Best Uses
Comments about CRC QD Electronic Cleaner:
Restored connectivity to my 20-year old Caravan's 60-pin SMEC.
Displaying reviews 1-8
Do you have questions about this product?(earn points for answers!)
Ask a question, get answers from real customers and in-house experts. Or contact Customer Care by email or call 1-877-238-2623.
Q:
Is it really 16 oz.? Methinks it is actually 11 oz. and the specs are wrong. Can anyone confirm?1 answer
CUSTOMER CARE
A:
Hi The Contrarian! Yes, the container package of this CRC QD Electronic Cleaner is 11 oz. I will forward this to the appropriate department and have this updated on our website.Q:
Can I use this on my mass air flow sensor too? Thank you.1 answer
CUSTOMER CARE
A:
Hi David, the CRC QD® Electronic Cleaner (Part No. 05103) can be used on circuit breakers, circuits, coin mechanisms, computer components, contacts, electronics, fiberglass, flux removal, sockets, lighting, plastics, nylon, plugs, relay switches, PVC, FPT, tape heads, and terminals. Ideal for applications where lower flash point materials can be tolerated. Do not use product near any source of ignition. For any further assistance, please feel free to call us at: 1-877-238-2623 or visit the nearest Advance Auto Parts store and one of our Parts Pros will gladly assist you with any questions or concerns you may have.Q:
Is this a similar product to the marine version! (or do I need to go to a marine supply to get this for my boat?)1 answer
CUSTOMER CARE
A:
Sorry, this CRC QD® Electronic Cleaner -part# 05103 cannot be used for marine applications. For any further assistance, please feel free to call us at: 1-877-238-2623 or visit the nearest Advance Auto Parts store and one of our Parts Pros will gladly assist you with any questions or concerns you may have.Q:
can i spray it directly into a lock cylinder on an acura cl1 answer
CUSTOMER CARE
A:
The CRC QD® Electronic Cleaner (Part No. 05103) can be used on circuit breakers, circuits, coin mechanisms, computer components, contacts, electronics, fiberglass, flux removal, sockets, lighting, plastics, nylon, plugs, relay switches, PVC, FPT, tape heads, and terminals. Ideal for applications where lower flash point materials can be tolerated. Do not use product near any source of ignition. Avoid contact with eyes and skin. Avoid breathing vapors. Use caution around energized equipment. The metal container will conduct electricity if it contacts a live source. This may result in injury to the user from electrical shock and/or flash fire. For product use instructions, please see the product label. Store in a cool dry area out of direct sunlight. Aerosol cans must be maintained below 120°F / 49°C to prevent cans from rupturing. For any further assistance, please feel free to call us at: 1-877-238-2623 or visit the nearest Advance Auto Parts store and one of our Parts Pros will gladly assist you with any questions or concerns you may have.Q:
A fountain soda spilled onto the dash console of our 2011 Suburban, and most of the console's audio and climate control buttons are either stuck or very sticky when pressing. Will QD Electronic Cleaner by CRC Industries safely clean and remove sticky residue from the various audio and climate control buttons on the dash console of a 2011 Suburban without harming the finish of the dash console? If not, is there another product you can recommend? Thank you.1 answer
CUSTOMER CARE
A:
This CRC QD® Electronic Cleaner - Part No. 05103 is recommended to use with circuit breakers, circuits, coin mechanisms, computer components, contacts, electronics, fiberglass, flux removal, sockets, lighting, plastics, nylon, plugs, relay switches, PVC, PTFE, tape heads, terminals. For further assistance, please feel free to call us at 1-877-238-2623 or visit your nearest Advance Auto Parts store and one of our representatives would be more than happy to assist you.Q:
Can I use this for power window switches?1 answer
CUSTOMER CARE
A:
This CRC QD® Electronic Cleaner (Part No. 05103) is used to clean contacts, connectors and sensitive electronic equipments. It helps to prevent contact failure. Its Quick-drying, plastic-safe formula leaves no residue. So, you can use it for your power window switches. For any further assistance please feel free to call us at: 1-877-238-2623 or visit the nearest Advance Auto Parts store and one of our Parts Pros will gladly assist you with any questions or concerns you may have.Q:
I am picking up my order at store 6278. This is one item is to be picked up at a far away store, but is avail at 6278. Can you transfer it there with the rest of my order?1 answer
CUSTOMER CARE
A:
For further assistance regarding the shipping information, please feel free to call us at 1-877-238-2623 or visit your nearest Advance Auto Parts store and one of our representatives would be more than happy to assist you.Q:
can i clean a throttle posistion sensor on a car1 answer
CUSTOMER CARE
A:
Cleaning the throttle body itself can be done using carburetor fluid and a clean cloth for the removal of light sludge. If heavy sludge buildup is an issue, the throttle body must be removed, cleaned in a solvent and allowed to dry. During this process, the throttle position sensor should not be cleaned due to the possibility of contamination or wire damage. The best way to preserve the sensor is to remove and replace it after cleaning is finished. For further assistance, please feel free to call us at 1-877-238-2623 or visit your nearest Advance Auto Parts store and one of our representatives would be more than happy to assist you.