Remanufactured Crankshaft Kit
Hover over the image to zoom in
Share this:

Crankshaft Rebuilders Remanufactured Crankshaft Kit

Part No. 12320 Warranty Details  

See if this part fits a specific vehicle.

Check Vehicle Fit

Remanufactured crankshaft kit is precision ground, micropolished and includes matching main and rod bearings.
Back To Top
Gaskets Included:No
Microfinished:Yes
Precision Ground:Yes
Rear Main Seal Included:No
Rod And Main Bearings Included:Yes

Do you have questions about this product?

 

Ask a question, get answers from real customers and in-house experts. For further assistance, please review your support options on our Contact Us page.

18 Questions | 22 Answers
Displaying questions 1-10Previous | Next »
  • Q:

    what is the stroke of this crankshaft?
    Asked on 9/23/2016 by laci

    1 answer

    • CUSTOMER CARE

      A:

      I'm glad to assist, Laci! The Crankshaft Kit - Part No. 12320 meets OEM specifications. The stroke is 3.48.

      Answered on 9/26/2016 by Solomon from AAP
  • Q:

    How do we return the core for a refund? Rod and crank bearings are included?
    Asked on 9/9/2016 by Stuart from United States

    1 answer

    • CUSTOMER CARE

      A:

      Hi Stuart, glad to assist you! To receive your Core Charge refund, you can do either of the following: Bring the part to any Advance Auto Parts store along with your receipt or packing slip or Mail the part back to Advance Auto Parts following the directions including on your packing slip. Core Charges are often mandated by state legislature, and, as such, the actual core charge and taxes on the charge may vary depending on the state in which you buy your part. The Advance Auto Parts core charge presented to you online today with your item is representative of the most common core charge. If you have any questions, please call 1-877-ADVANCE (238-2623) or visit any Advance Auto Parts store.

      Answered on 9/12/2016 by Steve from AAP
  • Q:

    how to install a reluctor on a 2.0 tracker 2003 no marks to alighn
    Asked on 5/24/2013 by george from United States

    1 answer

    • CUSTOMER CARE

      A:

      With reference to your inquiry on the Crankshaft Rebuilders Crankshaft Kit - part# 12320, for installing the reluctor on a Chevy Tracker turn crank to where the pin and grove is straight up. On cam gear their is a dot, line them up dot to pin and replace chain or belt. Do not adjust to tight or to loose since it will jump time. For any further assistance, please feel free to call us at: 1-877-238-2623 or visit the nearest Advance Auto Parts store and one of our Parts Pros will gladly assist you with any questions or concerns you may have.

      Answered on 5/26/2013 by Vincent from AAP
  • Q:

    I bought this crank kit and installed the crank shaft will not turn at all could have the bearings they sent be the wrong size
    Asked on 3/23/2013 by jeff from ohio

    1 answer

    • CUSTOMER CARE

      A:

      Unfortunately we are unable to diagnose what is wrong with your vehicle without being able to be there with your vehicle. However, I would suggest taking your vehicle to a certified mechanic for a proper diagnosis.
      For any further assistance please feel free to call us at: 1-877-238-2623 or visit the nearest Advance Auto Parts store and one of our Parts Pros will gladly assist you with any questions or concerns you may have.

      Answered on 3/25/2013 by Aaron from AAP
  • Q:

    what size woodruff keys does this crank shaft use
    Asked on 3/21/2013 by jeff from ohio

    1 answer

    • CUSTOMER CARE

      A:

      With reference to your inquiry on the Crankshaft Rebuilders Crankshaft Kit - part# 12320, you would need 0.750" x 0.188" crankshaft key. For any further assistance, please call us at: 1-877-238-2623 or visit the nearest Advance Auto Parts store and one of our Parts Pros will gladly assist you with any questions or concerns you may have.

      Answered on 3/22/2013 by Vincent from AAP
  • Q:

    Do you supply a crank kit for a 350 CI engine Casting # 3970010?
    Asked on 2/12/2013 by Impala Jim from Arlington TX

    1 answer

    • CUSTOMER CARE

      A:

      Please feel free to call us at: 1-877-238-2623 or visit the nearest Advance Auto Parts store and one of our Parts Pros will gladly assist you with any questions or concerns you may have.

      Answered on 2/13/2013 by Aaron from AAP
  • Q:

    Please Answer by e-mail only. How much have the journals on the crankshaft in this kit been ground, 001.?,002.?,005.?,010.?,020.?,030.?,040.?,060.(min-max)? What is the limit crankshaft re-builders will grind a shaft before discarding it as useless? May I request a specific tolerance? Has the crankshaft end play been checked while in a test block? Has the "Thrust facing area" been ground any differently then the rod and main journals? Will the rod and main journals be ground the same? If not, will all the rod journals be the same? Will all the main journals be the same if different then the rod journals? Will the oil passage openings be deburred? Are these crankshafts reground from original GM castings? Does this shaft maintain the original manufacturers balancing by being machined equally from each end? Will the packaging contain a postage paid return container for the core? Finally, will the crankshaft journals and bearings be marked in case future bearing replacement is necessary?
    Asked on 12/10/2012 by SpryGuy from Fredericksburg, VA

    1 answer

    • CUSTOMER CARE

      A:

      With reference to this Crankshaft Rebuilders Crankshaft Kit - part# 12320, You will not know until you purchase, it will tell you on the actual box for how much have the journals on the crankshaft in this kit been ground. 40 thousandth (max) is the limit crankshaft re-builders will grind a shaft before discarding it as useless. They have OE tolerance and part will be within that range. The crankshaft end play has not been checked while in a test block. All rod journals will be the same, if rods are a 10 all the rods will be a 10, if rod is 20 all rods will be 20 etc. "Thrust facing area" is not been ground differently, only difference is using side of the rock vs. the face of the rock. For any further assistance, you may also visit your nearest Advance Auto store or call us directly at 1-877-ADVANCE (238-2623) and one of our representatives there would be more than happy to assist you.

      Answered on 1/2/2013 by Vincent from AAP
  • Q:

    Hi would this crankshaft fit a ford 460 (2YABC).
    Thank you
    Asked on 5/5/2012 by Anonymous

    2 answers

    • CUSTOMER CARE

      A:

      We will need more information including the year and model of your application before we can make a suggestion. Please call us at 1-877-ADVANCE (238-2623) and we would be more than happy to further assist you.

      Answered on 5/9/2012 by Vincent from AAP
    • A:

      no ford will not fit chevy in this instance !

      Answered on 5/29/2012 by joey from oxford ga
  • Q:

    what is the size of the rod bearings that come with this crankshaft
    Asked on 3/28/2012 by Anonymous

    1 answer

    • CUSTOMER CARE

      A:

      The diameter of the rod bearings that come with this Crankshaft Rebuilders Crankshaft Kit with Part No. 12320 is 2.100".

      Answered on 4/4/2012 by John the Car-Doc from AAP
  • Q:

    What is the weight of this crank?
    Asked on 2/17/2012 by Anonymous

    2 answers

    • CUSTOMER CARE

      A:

      The weight of this part Crankshaft Rebuilders Crankshaft Kit, Part No. 12320 manufactured by Crankshaft Rebuilders is 57.0 lbs.
      For compatibility of this part with your vehicle, please provide your vehicle make, model and engine specification.

      Answered on 2/18/2012 by Aaron from AAP
    • CUSTOMER CARE

      A:

      The weight of this Crankshaft Rebuilders Crankshaft Kit with Part No. 12320 is 10 lbs.

      Answered on 2/18/2012 by John the Car-Doc from AAP
Displaying questions 1-10Previous | Next »

Do you have a question about this product? 

Check out the specials in our monthly flyer.
 
 
Disclaimer We strive to keep all information accurate and up-to-date; however, product availability, pricing, promotions and store hours are subject to change without notice. Please contact Customer Care if you have any questions or corrections.