Drum Brake Wheel Cylinder
Hover over the image to zoom in
Share this:

Carquest Wearever Drum Brake Wheel Cylinder

Part No. WCA59240 Warranty Details  
$10.99
Quantity  Add to Cart

See if this part fits a specific vehicle.

Check Vehicle Fit

Direct replacement Wheel Cylinders are designed to fit specific vehicle applications and to ensure a proper fit every time. Normal wear may cause piston seals to leak. Corrosion and pitting can also occur inside Wheel Cylinders as moisture builds up in the brake fluid. A leaky Wheel Cylinder can be dangerous to the driver, causing gradual softening of the brake pedal and creating brake pull to one side.

Product Features:
  • All Wheel Cylinders are made with high quality EPDM rubber cups and boots for long lasting performance
  • Wheel Cylinder bores are surface tested to ensure an optimum sealing surface for the pressure cups
  • Due to repair time and cost, it is more desirable to replace instead of repair Wheel Cylinders
  • Recommended replacement is suggested when servicing drum brake
Back To Top
Bleeder Screw Cap Included:No
Bleeder Screw Included:Yes
Bore Size:15/16 in
Cylinder Material:Cast Iron
Inlet Thread Size:3/8-24
Installation Hardware Included:No

REVIEW SNAPSHOT®

by PowerReviews
Tru-TorqueDrum Brake Wheel Cylinder
 
4.8

(based on 4 reviews)

Ratings Distribution

  • 5 Stars

     

    (3)

  • 4 Stars

     

    (1)

  • 3 Stars

     

    (0)

  • 2 Stars

     

    (0)

  • 1 Stars

     

    (0)

100%

of respondents would recommend this to a friend.

Pros

  • Easy to install (4)
  • Decreased stopping distance (3)

Cons

No Cons

Best Uses

  • Replacement (3)
  • Restoration (3)
    • Reviewer Profile:
    • Mechanic (3)

Reviewed by 4 customers

Sort by

Displaying reviews 1-4

Back to top

 
5.0

Worked well

By 

from Savage, MN.

About Me Auto Enthusiast, Casual Driver, Mechanic, Truck Enthusiast

Verified Buyer
Level 3

Pros

  • Decreased Stopping Distance
  • Easy To Install

Cons

    Best Uses

    • Everyday Driving
    • Replacement
    • Restoration

    Comments about Tru-Torque Drum Brake Wheel Cylinder:

    Easy install no problems.

    Comment on this review(earn points)

    (4 of 5 customers found this review helpful)

     
    4.0

    fit perfectly

    By 

    from NJ

    About Me Mechanic

    Verified Buyer
    Level 3

    Pros

    • Easy To Install

    Cons

      Best Uses

      • Replacement

      Comments about Tru-Torque Drum Brake Wheel Cylinder:

      Good rebuild unit

      Comment on this review(earn points)

      (2 of 5 customers found this review helpful)

       
      5.0

      fits Hudson

      By 

      from Florida

      About Me Auto Enthusiast, Competitive Driver, Mechanic, Super Shade Tree

      Pros

      • Decreased Stopping Distance
      • Easy To Install
      • Lightweight
      • No Fade

      Cons

        Best Uses

        • Restoration

        Comments about Tru-Torque Drum Brake Wheel Cylinder:

        Replaces rear wheel cylinder in full size Hudsons built from 1948 through 1954 except the Jet model. No need to rebuild a Rusty, corroded original cylinder. No modifications. Just bolt in and bleed. Can't get any easier than that!

        Comment on this review(earn points)

        (10 of 18 customers found this review helpful)

         
        5.0

        GOOD STUFF

        By 

        from KY

        Verified Buyer
        3 or more reviews submitted

        Pros

        • Decreased Stopping Distance
        • Easy To Install
        • Lightweight
        • No Fade

        Cons

          Best Uses

          • Everyday Driving
          • Replacement
          • Restoration

          Comments about Tru-Torque Drum Brake Wheel Cylinder:

          GOOD STUFF

          • Car & Truck:
          • Auto Enthusiast, Casual Driver, Mechanic, Truck Enthusiast

          Comment on this review(earn points)

          Displaying reviews 1-4

          Back to top

          Do you have questions about this product?(earn points for answers!)

           

          Ask a question, get answers from real customers and in-house experts. Or contact Customer Care by email or call 1-877-238-2623.

          2 Questions | 3 Answers
          Displaying questions 1-2
          • Q:

            can you use one brake wheel cylinder for eathier side?
            Asked on 11/20/2011 by Dwayne from stafford springs ct

            1 answer

            • CUSTOMER CARE

              A:

              Yes, it will work for both the rear driver side and rear passenger side.

              Answered on 11/21/2011 by DIY Daniel from AAP
          • Q:

            rebuild or new is part made / re worked in USA?
            Asked on 2/6/2011 by Anonymous

            2 answers

            • CUSTOMER CARE

              A:

              It is the new Drum Brake Wheel Cylinder manufactured in U.S.A.

              Answered on 2/10/2011 by Parts Guru Geo from AAP
            • A:

              most of the parts that i get from advance have been rebuilt. i had a 1982 chevy and now a 1991 f150 that needs allot of work and is rusted but i haven't had any problems from this product.

              Answered on 6/16/2011 by packer from blanchard, pa
          Displaying questions 1-2

          Do you have a question about this product? 

          Create or view your online garage

          Check out the specials in our monthly flyer

           
           
          Disclaimer We strive to keep all information accurate and up-to-date; however, product availability, pricing, promotions and store hours are subject to change without notice. Please contact Customer Care if you have any questions or corrections.