Drum Brake Wheel Cylinder
Hover over the image to zoom in
Share this:

Carquest Wearever Drum Brake Wheel Cylinder

Part No. WCA37785 Warranty Details  

See if this part fits a specific vehicle.

Check Vehicle Fit

Direct replacement Wheel Cylinders are designed to fit specific vehicle applications and to ensure a proper fit every time. Normal wear may cause piston seals to leak. Corrosion and pitting can also occur inside Wheel Cylinders as moisture builds up in the brake fluid. A leaky Wheel Cylinder can be dangerous to the driver, causing gradual softening of the brake pedal and creating brake pull to one side.

Product Features:
  • All Wheel Cylinders are made with high quality EPDM rubber cups and boots for long lasting performance
  • Wheel Cylinder bores are surface tested to ensure an optimum sealing surface for the pressure cups
  • Due to repair time and cost, it is more desirable to replace instead of repair Wheel Cylinders
  • Recommended replacement is suggested when servicing drum brake
Back To Top
Bleeder Screw Cap Included:No
Bleeder Screw Included:Yes
Bore Size:1-3/16 in
Cylinder Material:Cast Iron
Inlet Thread Size:3/8-24
Installation Hardware Included:No

REVIEW SNAPSHOT®

by PowerReviews
Tru-TorqueDrum Brake Wheel Cylinder
 
4.0

(based on 10 reviews)

Ratings Distribution

  • 5 Stars

     

    (5)

  • 4 Stars

     

    (2)

  • 3 Stars

     

    (2)

  • 2 Stars

     

    (0)

  • 1 Stars

     

    (1)

90%

of respondents would recommend this to a friend.

Pros

  • Easy to install (7)

Cons

No Cons

Best Uses

  • Replacement (6)
  • Everyday driving (5)
    • Reviewer Profile:
    • Mechanic (4), Casual driver (3)

Most Liked Positive Review

 

cheap enough to replace with shoes

Work great 99 tahoe had froze one on pass and blew the drivers side, these put me back on the road

Work great 99 tahoe had froze one on pass and blew the drivers side, these put me back on the road

VS

Most Liked Negative Review

 

Good and economical product

Drum brakes are a pain to start with ! Do your self a favor get some good brake cleaner spray, good shoes, cylinders, drums and don't forget the hardware. That way is done...Read complete review

Drum brakes are a pain to start with ! Do your self a favor get some good brake cleaner spray, good shoes, cylinders, drums and don't forget the hardware. That way is done correctly and you don't have to worry on doing it all over again. Also get a good set of brake line wrenches and spring pliers it will make your job a lot easier.

Reviewed by 10 customers

Sort by

Displaying reviews 1-10

Back to top

(3 of 6 customers found this review helpful)

 
5.0

Works great

By 

from Louisiana

About Me Casual Driver

Verified Buyer
Helpful Reviewer

Pros

  • Easy To Install

Cons

    Best Uses

    • Everyday Driving

    Comments about Tru-Torque Drum Brake Wheel Cylinder:

    Easy to install, fit perfect.

    Comment on this review(earn points)

    (1 of 2 customers found this review helpful)

     
    1.0

    FAILED

    By 

    from GREENVILLE,NC

    About Me Mechanic

    Pros

      Cons

        Best Uses

          Comments about Tru-Torque Drum Brake Wheel Cylinder:

          TWO YEARS OLD AND BOTH CYLINDERS ARE LEAKING.

          Comment on this review(earn points)

          (1 of 2 customers found this review helpful)

           
          4.0

          Worked as descrided

          By 

          from Harrah Ok

          About Me Mechanic

          Verified Buyer
          3 or more reviews submitted

          Pros

          • Works Great

          Cons

          • None

          Best Uses

          • Replacement

          Comments about Tru-Torque Drum Brake Wheel Cylinder:

          I bent an axle replaced the diff had to rebuild the brake Advanced made it easy to get what I needed. I also saved money using the coupons.
          Woooo Hooooo!!!!

          Comment on this review(earn points)

          (2 of 2 customers found this review helpful)

           
          5.0

          cheap enough to replace with shoes

          Pros

          • Easy To Install

          Cons

            Best Uses

              Comments about Tru-Torque Drum Brake Wheel Cylinder:

              Work great 99 tahoe had froze one on pass and blew the drivers side, these put me back on the road

              Comment on this review(earn points)

              (7 of 17 customers found this review helpful)

               
              5.0

              perfect

              By 

              from Hartford, CT

              About Me Auto Enthusiast, Truck Enthusiast

              Verified Buyer
              3 or more reviews submitted

              Pros

              • Easy To Install

              Cons

                Best Uses

                  Comments about Tru-Torque Drum Brake Wheel Cylinder:

                  in stock, ordered on line picked up in store

                  Comment on this review(earn points)

                  (6 of 13 customers found this review helpful)

                   
                  4.0

                  They Fit perfect 1st try

                  By 

                  from south carolina

                  About Me Casual Driver, Mechanic

                  Verified Buyer
                  Helpful Reviewer

                  Pros

                  • Easy To Install

                  Cons

                    Best Uses

                    • Everyday Driving
                    • Replacement

                    Comments about Tru-Torque Drum Brake Wheel Cylinder:

                    buy online pick up in store use discount code its that simple to get it cheaper

                    Comment on this review(earn points)

                    (9 of 20 customers found this review helpful)

                     
                    5.0

                    Drum Brake Wheel Cylinder by Tru-Torque

                    By 

                    from Austin, TX

                    About Me Auto Enthusiast, Casual Driver, Mechanic

                    Ask me a question

                    Verified Buyer
                    Level 4

                    Pros

                    • Easy To Install
                    • Exact fit

                    Cons

                      Best Uses

                      • Everyday Driving
                      • Replacement
                      • Restoration

                      Comments about Tru-Torque Drum Brake Wheel Cylinder:

                      It's a new wheel cylinder, which doesn't get much more simple than that. No need to spend $30+ a piece on wheel cylinders when you can buy these for around $13 +/- a piece. I found this product to be a direct and perfect fit replacement part. Just swap them out with the appropriate tools, bleed the brakes and you're done!

                      Comment on this review(earn points)

                      (8 of 15 customers found this review helpful)

                       
                      5.0

                      I would purchase this again.

                      By 

                      from Rohrersville, MD

                      About Me Truck Enthusiast

                      Ask me a question

                      Verified Buyer
                      Helpful Reviewer

                      Pros

                      • Decreased Stopping Distance
                      • Easy To Install

                      Cons

                        Best Uses

                        • Everyday Driving
                        • Replacement

                        Comments about Tru-Torque Drum Brake Wheel Cylinder:

                        Easy to replace and perfect fit.

                        Comment on this review(earn points)

                        (11 of 22 customers found this review helpful)

                         
                        3.0

                        Not perfect fit for 99 suburban

                        By 

                        from Endicott, NY

                        Helpful Reviewer

                        Pros

                          Cons

                          • Difficult To Install

                          Best Uses

                          • Replacement

                          Comments about Tru-Torque Drum Brake Wheel Cylinder:

                          not perfect fit, edge of casting where mounting bolts install are slightly larger than original and cause difficulties to get part into place.. My fix was a quick bevel of this edge on the grinder...

                          • Car & Truck:
                          • Mechanic

                          Comment on this review(earn points)

                          (11 of 22 customers found this review helpful)

                           
                          3.0

                          Good and economical product

                          By 

                          from Bethlehem, PA

                          Verified Buyer
                          Helpful Reviewer

                          Pros

                          • Easy To Install

                          Cons

                            Best Uses

                            • Everyday Driving
                            • Replacement
                            • Restoration

                            Comments about Tru-Torque Drum Brake Wheel Cylinder:

                            Drum brakes are a pain to start with ! Do your self a favor get some good brake cleaner spray, good shoes, cylinders, drums and don't forget the hardware. That way is done correctly and you don't have to worry on doing it all over again. Also get a good set of brake line wrenches and spring pliers it will make your job a lot easier.

                            • Car & Truck:
                            • Casual Driver, Truck Enthusiast

                            Comment on this review(earn points)

                            Displaying reviews 1-10

                            Back to top

                            Do you have questions about this product?(earn points for answers!)

                             

                            Ask a question, get answers from real customers and in-house experts. Or contact Customer Care by email or call 1-877-238-2623.

                            7 Questions | 8 Answers
                            Displaying questions 1-7
                            • Q:

                              will this fit my 96 k-1500 xtended cab,with 11 in brakes
                              Asked on 3/22/2015 by walter t from leechburg pa

                              1 answer

                              • CUSTOMER CARE

                                A:

                                Hi Walter, this part is not an exact fit for your 1996 K1500 with 11 inches brakes. We do have an exact drum brake wheel cylinder available online for your vehicle and the part number is W37781. Please enter your vehicle on our website and search for this part to check the fitment.

                                Answered on 3/22/2015 by Steve from AAP
                            • Q:

                              Will this part fit a 1994 chevy full size blazer with the 350 motor? With the silverado package.
                              Asked on 10/18/2014 by Cj

                              1 answer

                              • CUSTOMER CARE

                                A:

                                Hi CJ, this part is not an exact fit for your 1994 Chevrolet Blazer with 350 motor. We do have an exact fit part available online for your vehicle and the part number is WC116224. Please enter your vehicle on our website and search for this part to check the fitment.

                                Answered on 10/20/2014 by Steve from AAP
                            • Q:

                              How do I tell the bore size of my wheel cylinder to purchase the correct one? 1998 Chevy k1500 ex cab short box 4x4
                              Asked on 3/25/2014 by Preston from Mt. Morris mi.

                              1 answer

                              • CUSTOMER CARE

                                A:

                                Good question, Preston! This part is an exact fit for your 1998 Chevrolet K1500 and it is for the rear left and right with bore size 1-3/16 inches.

                                Answered on 3/26/2014 by Steve from AAP
                            • Q:

                              1995 Chevy 1500 WT want to replace the rear wheel cylinders and the brake shoes seems like there are multi choices on both 1 inch bore and 1 3/16 bore on the cylinder and like 10 inch shoes and 11 and something shoes any ideas?
                              Asked on 3/23/2014 by Mike from Atlanta, GA

                              1 answer

                              • CUSTOMER CARE

                                A:

                                Hi Mike, I'm glad to be of assistance! Yes, there are choices for brake cylinder and you will need to check the 'Service parts identification' sticker which is normally located in your glove box, on the inside of your trunk lid, and/or on the bottom side of the cover for your spare tire in your trunk. Based on your brake code you will be able to find the exact part for your C1500. More information on the "Service Parts Identification Label" can be found in this link -

                                http://marksautoparts.wordpress.com/2013/01/21/general-motors-service-parts-identification-label-explained/

                                Answered on 4/2/2014 by John the Car-Doc from AAP
                            • Q:

                              does this cylinder come with pistons?
                              Asked on 2/23/2014 by gene

                              1 answer

                              • CUSTOMER CARE

                                A:

                                Hi Gene, good question! Yes, this drum brake wheel cylinder comes with pistons.

                                Answered on 2/25/2014 by Vincent from AAP
                            • Q:

                              does the wheel cylinder fit both left and right sides
                              Asked on 2/22/2014 by breadmaker from north branch, mi

                              1 answer

                              • CUSTOMER CARE

                                A:

                                Hi Breadmaker, glad to assist you! To check the exact fit application for the Tru-Torque Drum Brake Wheel Cylinder (Part No. W37785), please provide us the year, make, model and engine size of your vehicle.

                                Answered on 2/23/2014 by Steve from AAP
                            • Q:

                              Why is the bore smaller on the HD chassie Part..?????
                              Asked on 11/19/2011 by Anonymous from Danbury CT

                              2 answers

                              • CUSTOMER CARE

                                A:

                                Rear Left; Bore = 1-3/16"; Exc. HD Chassis; Rear Right; Bore = 1-3/16"; Exc. HD Chassis.

                                Answered on 11/21/2011 by Dennis from AAP
                              • A:

                                because it is a different style of brakes that self actuates with less force

                                Answered on 1/20/2012 by m-m from alpena mi
                            Displaying questions 1-7

                            Do you have a question about this product? 

                            Create or view your online garage

                            Check out the specials in our monthly flyer

                             
                             
                            Disclaimer We strive to keep all information accurate and up-to-date; however, product availability, pricing, promotions and store hours are subject to change without notice. Please contact Customer Care if you have any questions or corrections.